PH值对化学沉积制备CdS薄膜性质的影响

实验研究了pH值对化学沉积制备CdS薄膜性质的影响。表明：在柠檬酸钠作为络合剂的体系中随着溶液中氨水浓度的提高CdS薄膜会发生相变，从立方相变为六方相，即当氨水浓度为0．31M时，得到立方相的CdS薄膜；而当氨水的浓度大于0．51M时，得到六方相的CdS薄膜。氨水浓度的提高也使得CdS薄膜的形貌有了很大的改善，且制备得到的CdS薄膜从富CA变为富S，但是薄膜仍是n型。氨水浓度对CdS薄膜的光学性质也有很大的影响，随着氨水浓度的提高所得到的CdS薄膜的禁带宽度增大。     

Hydriding and Dehydriding Characteristics of Mechanically Alloyed LaMg_(17) Ni Composite Material

Magnesiumandmagnesiumalloyshavebeenin vestigatedashydrogenstoragematerialsforseveralde cadesbecausefarmorehydrogenbyweightcanbestoredinthemthaninmostoftheothercurrentlyknownhydrogenstoragealloys .Moreover ,thehighnaturalabundanceofMg ,itslightmassandenviron mentalcompatibilitypotentiallymakemagnesiumoneofthemostprospectivecandidatesforfuturehydrogenstoragematerials .Unfortunately ,thepracticalappli cationofMganditsalloyshasbeenlimitedonlytocertainstoragedevicebecauseoftheirpoorhydriding dehydr…     

铅锌选矿厂废水回用研究

简述了铅锌选厂废水回用小型试验及工业试验情况，在基本上不改变工艺结构基础上改变药剂制度达到废水回用的目的，使选矿废水回用率达到80％，实现尾矿库废水零排放。     

低掺杂浓度Nd:YVO4激光器的输出特性研究

在对Nd:YVO_4晶体的掺杂浓度和晶体长度对激光器性能的影响进行了分析后,报道了利用掺杂浓度为0.3at％,通光长度为10mm的Nd:YVO_4晶体作为增益介质,带光纤耦合的激光二极管端面抽运的Nd:YVO_4激光器。在抽运功率为27.365W时,获得了14.85W的TEM_(00)模输出,光一光转换效率为60.49％,斜效率达64.5％。     

Alleviation Effect of Lanthanum on Cadmium Stress in Seedling Hydroponic Culture of Kidney Bean and Corn

Since1970s,rare earths(RE)have been exten-sively used as micro-fertilizers for crops in China.Ithas already been proved that REcani mprove the pro-duction and quality of crops.However,there havebeen a fewinvestigations about using RE as regulatorin pollution ecology.For example,An et al[1]studiedthe effects of O3on wheat growth and the protectiveeffect of RE.Yan and Zhou et al[2,3]discussed theprotective effect of RE on plants under acid rainstress.Jia et al[4]and Hu et al[5]reported th…     

穿壁焊极柱合金探索

本文对起动用铅酸蓄电池穿壁焊极柱用合金配方进行了探索 ,并得到了良好的应用效果     

Properties and Performance of Cation-Doped Ceria Electrolyte Materials in Solid Oxide Fuel Cell Applications

Cation-doped CeO₂ electrolyte has been evaluated in single-cell and short-stack tests in solid oxide fuel cell environments and applications. These results, along with conductivity measurements, indicate that an ionic transference number of ∼0.75 can be expected at 800°C. Single cells have shown a power density >350 mW/cm². Multicell stacks have demonstrated a peak performance of >100 mW/cm² at 700°C using metallic separators.     

Schäden durch kerbinduzierte Schwingbrüche

Failures by notch induced fatigue fractures Notches produce local stress concentrations and promote the formation of fatigue cracks. Characteristic types of notches as a result of design, manufacturing and operation are presented and remedial measures are discussed. Examples demonstrate the effect of different kinds of notches on various components.     

Reply to Comment on “Ewald summation technique for one-dimensional charge distributions”

We explain why the methods in Langridge, Hart and Crampin [Comput. Phys. Commun. 134 (2001) 78] suffice for the evaluation of the lattice sums entering the Madelung matrix describing multipole interactions in systems with one-dimensional translational periodicity.     

Significance of fluid regime in biological filtration

A dispersed flow model previously developed to study substrate utilization in unsaturated media was experimentally verified and its practical application was considered. For this purpose, measurements were made using tap water and a synthetic feed solution. The importance of the change in fluid regime as regards to the simultaneous transport and reaction within biological filters were demonstrated. The effect of drop formation and the breakage of liquid jets inside the filters on substrate utilization was also shown.