采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。     

逆向反射镜光度测量

为了正确评价逆向反射镜的加工质量与使用效果，且将二者有机地统一起来，本文提出应根据测试目的来选择合适的光度测量方法，并进一步分析了不同测试目的将导致测量装置的组成、几何条件（距离，孔径角，工作姿态等）、光度条件（光源色温、稳定性与均匀性，接收器线性、灵敏度与光谱修正等）、测量参数（反光强度系数、逆反射系数、逆亮度系数等）等各不相同。     

Implementing software metrics — the critical success factors

This paper reviews the current state of industry with regard to the introduction of software metrics. It discusses the benefits that organizations have derived from metrication, it looks at why organizations have sought to introduce metrics programmes, how they have gone about introducing those programmes and the problems that they have encountered during implementation. The review found that, on the whole, only the sanitized aspects of metrics experiences have actually been published. This seems to be especially the case with respect to practitioner resistance. Very few organizations admit to having encountered resistance during the introduction of a metrics programme. The paper also includes the results of a pilot study, conducted by the first author, which examines the attitudes that developers hold towards the introduction of software metrics. The key findings of this pilot study are that positive attitudes to metrics correlate highly with levels of education and to job satisfaction.     

正交双频光栅CCD系统剪切干涉测量二维温度场

以半导体激光器为光源，利用正交双频光栅（ＯＤＦＧ）ＣＣＤ系统剪切干涉对带平板边界的半圆柱体热源的二维温度场进行实时诊断，分析剪切干涉图时，用柱函数系作为拟合基底，给出二维自然对流温度场的定量分布。     

特低渗透油层含油饱和度的一种校正方法

松辽盆地北部扶杨油层属特低渗透油层，即使采用油基泥浆取心或密闭取心样品，束缚水饱和度也难以测准。蒸馏法试验表明，若试验温度低，则束缚水蒸发不彻底，实测含水饱和度偏低；若试验温度高，则容易造成岩样粘土矿物晶间水脱水，实测含水饱和度偏高，影响了储量计算精度。为搞清特低渗透油层流体蒸发特征，开展了蒸发率试验，试验过程是：将岩样洗油后重新饱和水，再在与蒸馏法试验相同的试验条件下测定蒸发的水量。试验结果表明，有效孔隙度越小，蒸发率越低。由于两个试验过程的蒸发率近似相等，用蒸发率试验可以模拟蒸馏法试验，由此推导出束缚水饱和度计算公式。应用该公式对榆树林油田进行测算，校正前后原始含油饱和度相差１２％以上，储量相差２０×１０６ｔ以上。图２（郭海莉摘）     

替代进口梳棉机测厚传感器集成电路芯片分立元件的电路设计

介绍了替代进口梳棉机测厚传感器集成电路分立元件的电路图，工作原理及特点。一年多的实际运行证明，电路参数达到了设计要求。     

溶液扩散系数自动测量系统

结合实时法全息干涉计量和数字图象处理技术，提出了一种溶液扩散系数的自动测量系统。在干涉图的处理中，采用了相位检测和曲线拟合技术，得到了亚象素的测量精度。     

Ion irradiation—induced structure damage to botanic samples using the ion transmission energy spectrum

1 INTRODUCTIONThe new aPplications of low energy heavy ion beam in irradi4ted botanical materialswere studied in recellt yeaxs. The beaminduced mutation effect on crop seeds has causedthe attention of physicist and biologists.[1l:] FOr examPle, 1ow energy ions can induceremarkable mutation to rice seeds.[3] There are many special phenomena when heavyions bombard botanic sW1e due to its special structure. Some studies showed that tllepenetration depths of some ions were far larger than t…     

动态波前相位的高分辨率测量

动态波前相位信息测量是大气光学，气动光学和激光技术等领域的重要实验手段。提出了一种具有高的时间和空间分辨率以及长的测量持续时间的动态波前相位测量方法。应用Ｈａｒｔｍａｎｎ－Ｓｈａｃｋ波前传感器获得高空间分辨率的相位信息，采用高帧频ＣＣＤ摄象机获得高时间分辨率图象数据。