Photovoltaic collectors efficiency according to their integration in buildings

A model for building integrated photovoltaic systems has been developed and implemented in a dynamic simulation tool. This tool takes into account the thermal interactions between the PV collector and the building. The influence of the type of integration upon the PV collector efficiency has been evaluated and hybrid PV/air collectors have been studied. An overall efficiency is defined, including the production of electricity and heat. A case study has been performed on two different typical buildings. In the case of a multi-crystalline silicon PV collector integrated on the roof of a single family house located in Paris, the efficiency of unventilated PV modules fixed on the roof is 14%. If the PV collector is used to preheat the ventilation air, the efficiency reaches 20%. A proper building integration also improves the environmental balance of PV technologies over their life cycle.     

硬度匹配对40CrNiMo滚子接触疲劳性能的影响

通过对“软－软”、“中－软”、“中－中”、“中－硬”四组不同硬度匹配的滚子接触疲劳试验得出四条Ｐ－Ｎ曲线。并发现中硬度材料的接触疲劳寿命高于软材料，而当主试样为中硬时，与之相匹配的陪试件硬度越高，主试样的寿命越短，通过分析讨论解释了产生上述现象的原因及其失效机理。     

Carnot comparison of multi-temperature level absorption heat cycles

Comparison of different absorption heat cycles is not always made on the correct manner. This also includes comparison of an ideal absorption cycle with a mechanical analogy. A new Carnot model operating with two heat engines and two mechanical heat pumps is defined to be the correct and logical way to describe the mechanical analogy for an absorption heat pump and an absorption heat transformer. General equations for the Carnot coefficient of performance, COP_r, are exemplified and simulated for an absorption heat pump and an absorption heat transformer, and an entropy flow fraction diagram is introduced. The important fact that the absorption heat cycles must operate under the same conditions when they are compared is discussed.     

Fatigue crack growth analysis of welded aluminium RHS T-joints with manipulated residual stress level

The fatigue life of a welded aluminium T‐joint made from beams with rectangular hollow section (RHS) has been predicted using a crack propagation analysis and compared with experimental results from joints with different residual stress levels. To include the effect of the residual stresses, the stress ratio was calculated at the weld toe and, via Walker's equation, introduced into the analysis. How to obtain the Walker exponent has been discussed in detail. The introduction of a stress ratio at the weld toe provides good agreement between the experimentally and analytically found S–N curves. The effect of the residual stress was successfully included in the analysis.     

Determining the life cycle of bolts using a local approach and the Dang Van criterion

The fatigue behaviour of bolts under axial load has always been considered from the component point of view for which fatigue limit is usually taken equal to 50 MPa, and few results are available to designers for limited lifetimes. Here, we take up this problem from a material point of view using a local approach. For each case of fatigue testing, using finite‐element (FE) model of the bolt, we determine the stabilized local stress at the root of the first thread in contact with the nut. To characterize bolt behaviour with these numerical results, we use Dang Van multiaxial fatigue criterion for which we extend application to the medium fatigue life. These results can be correlated with the experimental numbers of cycles to failure to determine material parameters of the generalized criterion. Using statistical Gauss method, we can make lifetime predictions for any level of risk of failure. In addition, we propose an analytical model to rapidly determine the local stress condition from nominal loading data (mean stress and alternating stress). This model dispenses us from a new modelling if the bolt is stressed in the same manner as the bolts used for behaviour characterization. Using this model and the generalized criterion, it is extremely easy to make lifetime predictions whatever the risk considered.     

低铁耗条件下转炉高碳低磷工艺实践与应用

对转炉炼钢实现低铁耗和高碳低磷工艺进行了分析，介绍了南钢公司转炉炼钢实践低铁耗条件下高碳低磷工艺的具体应用措施。     

Critical incidents and chronic stressors at work: Their impact on forensic doctors.

Workers in medium- or high-risk professions are often confronted with critical incidents at the workplace. The impact of these acute stressors may be serious and enduring. Many workers also experience chronic job stressors, such as work overload or role conflicts. This study examined the frequently neglected relationship of acute and chronic stressors with self-reported health symptoms, such as posttraumatic responses, fatigue, and burnout. This association was investigated in a sample of forensic doctors in the Netherlands (N = 84). It was found that the more traumatic events the respondents experienced, the more problems they reported in coping with the traumatic events. Chronic job stressors were associated with posttraumatic responses (intrusions and avoidances) and with burnout and fatigue. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Finite element simulation of the mechanics of flat contact pad fretting fatigue tests

An understanding into the macro kinetic and kinematic behaviour of fretted surfaces is provided. Making use of a modified version of a previously developed in‐house two‐dimensional elastic–plastic finite element analysis numerically simulates flat contact pad fretting fatigue tests. Basic macro mechanics concepts are adopted to idealise two bodies with rough contact surfaces and loaded at two different sites with arbitrary axial loading profiles. A time scale factor is devised to recognise the earliest candidate out of the events possibly accommodated at each loading increment. The present analysis utilises a relevant experimental set up developed in the Structural Integrity Research Institute of the University of Sheffield as an application. Computational results accurate to within 1.2% and corresponding to one contact pad span and six constant normal loads acting individually with four amplitudes of two sinusoidal axial load cycles are presented. The present computations include (1) the development of the global and local normal and tangential reactions and relative sliding displacement acting along the fretting surfaces and (2) contact pad deformation, generated stress fields and plasticity development within the neighbouring region of the fretted area.     

锅炉未焊透椭圆接管结构应力数值分析

应用有限元法对未焊透的椭圆接管结构进行了应力数值分析,并应用压力容器分析设计法,对该结构进行了疲劳分析,得出结构因未焊透缺陷导致疲劳破坏。     

Effect of Rare Earth Elements on Thermal Fatigue Property of Low Chromium Semi-Steel

The effect of rare earth elements on eutectic carbide‘s morphology of low chromium semi-steel in as-cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide‘s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950℃ for 3h.