Stability of AB5-type hydrogen storage alloys

In this paper, we deduced an empirical equation for predicting the stabilities of the hydrides of AB₅-type compounds with the consideration of the effects of geometrical factor and electric factor. The theoretical curves derived from this equation are in good agreement with the test results of La_1−xCa_xNi₅, Ml_1−xCa_xNi₅ and La_1−xCe_xNi₅ compounds. With this model, we can easily interpret the phenomenon that the initial partial substitution of R by Ca in R_1−xCa_xNi₅ (R is rare earth metal) compounds cause an increase of hydrogen desorption pressure to a maximum value, whereas in the range of larger Ca content x the hydrogen desorption pressure decreases with increasing x.     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

PC/ABS合金研究进展

概述了PC/ABS合金国内外的开发应用现状,并综述了国内外近年来对PC/ABS合金的研究进展,其中包括:PC/ABS合金的相容性技术、相容剂的选用及影响合金性能的因素:原料、组分的配比、成型条件等,并对该合金的发展方向作了简要的分析,认为PC/ABS合金的开发研究在国内塑料合金的工业开发、应用中极其重要,开发的核心是相容化技术。     

Use of mesoporous SBA-15 for nanostructuring titania for photocatalytic applications

SBA15–TiO₂ samples prepared by introducing titanium with a grafting method and having TiO₂ loadings below 15 wt.% have been characterized by XRF, XRD, IR, porosimetry, SEM, HRTEM, and UV–Visible diffuse reflectance. Differently from the samples reported in the literature characterized by a high TiO₂ loading, no evidences have been found for the presence of titania particles inside or outside the mesopores of SBA-15. Three different titanium species were instead evidenced to be present. The first two derive from the reaction of titanium with silanol groups in the corona area of inner SBA-15 walls leading to the formation of either TiO₄ tetrahedral sites (by reaction by hydroxyl nests of surface defect sites) and/or pseudo-octahedral surface sites anchored by two (or more) Si or Ti ions through bridging oxygens. The third species derives from the reaction of titanium in the regions with high sylanol density, e.g. in the micropores located in the corona of SBA-15 channels, leading to the formation of TiO₂-like nanoareas (probably Si-doped) with dimensions of around 1–2 nm maximum. The potential interest of these materials as photocatalysts, for the presence of a TiO₂-like nanoareas highly accessible by reactants, is discussed.     

低熔点合金填充聚合物材料断口形貌研究

研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。实验结果表明:不同的合金对体系的影响很大,低分子量、低结晶性聚合物,高的成型加工温度可提高材料的相容性。     

非木本木质素磺酸镁对水泥净浆和砂浆性能的影响

用红外光谱法等测定了非木本木质素磺酸镁的结构特征参数,研究了其对水泥净浆和砂浆性能的影响,并与木本木质素磺酸钙进行了对比。非木本木质素磺酸镁结构中的甲基、酚羟基、芳香环比木质素磺酸钙少;特性黏度为 0. 61mL/g,仅是木质素磺酸钙的 61%;磺化度为 0 78mmol/g,比木质素磺酸钙低约 40%。木质素磺酸镁溶液的最低表面张力为 49 82mN/m,起泡性能与木质素磺酸钙相近。非木本木质素磺酸镁对水泥净浆和砂浆减水分散作用为木本木质素磺酸钙的 86 6% ~91 1%。但掺质量分数 0 5%的木质素磺酸镁的砂浆, 28d的抗压强度比掺木质素磺酸钙的高 70 5%。     

Iron species incorporated over different silica supports for the heterogeneous photo-Fenton oxidation of phenol

Iron-containing catalysts have been prepared following different synthesis routes and silica supports (amorphous, zeolitic and mesostructured materials). Activity and stability of these materials were assessed on the photo-Fenton degradation of phenolic aqueous solutions using near UV irradiation (higher than 313 nm) at room temperature and initial neutral pH. Their catalytic performance was monitored in terms of phenol and total organic carbon (TOC) conversions. Aromatic compounds and carboxylic acids as by-products coming from incomplete mineralization of phenol as well as the efficiency of each catalytic system in the use of the oxidant were also studied. Stability of the materials throughout the photo-Fenton reaction was evaluated in terms of metal leachibility. Activity and stability depend on the environment of iron species and features of silica support. The evolution of pH with the reaction time and their relationship with TOC degradation and leaching degree has been discussed. A nanocomposite material of crystalline iron oxides supported over mesostructured SBA-15 material is shown the most successful catalyst for degradation of phenolic aqueous solutions by photo-Fenton processes, achieving an outstanding overall catalytic performance accompanied with a noteworthy stability.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

Computation of concentrations of characteristic atoms of alloys in BCC structure

In this paper,taking Nb-Mo alloy system as an example,the equations of concentration of characteristic atoms of alloys in BCC structure were obtained on the basis of the idea of systematic science of alloys and the number of coordination atoms.The concentrations of characteristic atoms in B2-NbMo type ordered alloys were calculated as functions of ordering degree(s) and composition xMo.When s=smax,the concentrations of characteristic atoms of stoichiometric B2-NbMo intermetallic compound are equal to that o...     

高炉法钙镁磷肥探料尺自动跟踪探料技术改造

针对钙镁磷肥生产中高炉探料存在的问题 ,对原自动探料装置的电气控制回路及跟踪装置进行改造 ,增加了探料跟踪最大极限位置 ,获得成功。改造后的自动跟踪探料尺 ,动作准确可靠 ,运行稳定 ,效率高 ,节能降耗 ,直接经济效益每年约 2 5万元 ,提高台时产量间接经济效益每年可达 4 0万元