无机灰分对餐厨沼渣中有机质热解特性的影响

针对餐厨垃圾厌氧处理所产生的沼渣具有产量大、灰分质量分数高的特点,研究沼渣中无机灰分对其热解过程的影响. 通过热重分析和热裂解?气相色谱质谱联用技术（Py-GC/MS）分析沼渣热解动力学特性及其产物. 动力学分析结果表明,沼渣除灰后,失重速率显著提高,热解起始温度由180 ℃降至160 ℃. 除灰沼渣的总表观活化能比沼渣的略高,原因可能是除灰使沼渣内部孔隙增加,在促进挥发分析出的同时,削弱了部分组分在热解过程中的催化裂解作用. 产物分析结果表明,NaCl能够促进油相产物中烃类向酮类的转化,ZnCl₂通过促进酸类的脱羧作用,使烃类质量分数提高至66.8%;Fe₂O₃和Al₂O₃使烃类物质的质量分数分别提高至66.8%和72.7%,CaO和MgO可以促进酸类脱羧生成酮,使产物中酮类的质量分数高达46.5%和39.4%.     

减水剂对高掺量粉煤灰砂浆性能的影响

研究了萘系高效减水剂（FDN）和木质素磺酸钙（LS）对高掺量粉煤灰砂浆性能的影响,测定了减水剂在胶凝颗粒表面的吸附、对水泥颗粒表面zeta电位等方面的影响。结果表明,和FDN相比,LS对砂浆的减水率较低,而对砂浆流动度保持能力较优;当掺量为0.4 wt%时,两者对砂浆稳定性的影响几乎一样。当掺量低于0.4 %时,LS的减水率和FDN接近是因为其具有较强的引气作用和FDN在胶凝颗粒表面吸附不完全;LS保持砂浆流动性能力较好是由于它的缓凝作用以及吸附LS的水泥颗粒表面zeta电位较稳定导致的。为了更好地将LS应用在高掺量粉煤灰砂浆中,可以从提高其减水率方面对其进行改性。     

A replacement of traditional insulation refractory brick by a waste-derived lightweight refractory castable

Lightweight insulation refractories are essential for high-temperature performance to reduce energy consumption. This study investigates a new insulation material, that is, solid waste rice husk ash (RHA) derived lightweight refractory castable, replacing traditional insulation refractory brick. The RHA is generated after the burning of rice husk as biomass fuel. The RHA is used as an aggregate and alkali-extracted silica sol from RHA as a binder to fabricate the insulation castable. The nanosilica containing (~30 wt%) sol is employed to synthesize the refractory castable by varying the sol amount (2.5-12.5 wt% silica from sol). The castable specimens are cast by a vibro-caster and fired at 900-1200°C in a muffle furnace. The physic-mechanical and thermal conductivity (κ) of the castable is investigated. At 1100°C with 10 wt% dry sol retaining sample shows an excellent apparent porosity (~65%), low bulk density (~ 0.8 g/cm³), and κ (0.136 W/m k) with sustainable compressive strength (6 MPa). The acquired results are a good match with the literature (other wastes-derived insulation materials) and industrial (silica insulation brick) obtained data. These promising outcomes may inspire the refractory industries for using RHA as an aggregate and RHA extracted sol as a binder for making insulation castable.     

煤粉炉粉煤灰提取氧化铝活化技术研究进展

介绍了近年来采用煤粉炉粉煤灰作为原料制备氧化铝的预处理活化工艺技术,指出了粉磨法、硫酸法、氯化钙法、铵盐法、碳酸盐法、氟化盐法、物理-化学联合活化法的优缺点及在工程转化过程中需重点关注的环节。虽然部分工艺技术实现了工业化,但因成本高等因素导致项目关停,建议粉煤灰综合利用研究方向应以工程转化难点问题为导向,理论研究与工程设计相结合,逐步探索出一条经济效益好、安全环保的粉煤灰制备氧化铝工业化路线。     

混合材对水泥浆体泌水性能的研究

通过调整水泥中钢渣粉、粉煤灰和石灰石粉的含量,检测水泥浆体泌水速率,研究了多种混合材对水泥的泌水性能的影响,结果表明：建立的水泥浆体泌水检测方法可以表征水泥的泌水性能;5%～6%的钢渣粉的加入促进了水泥整体的保水效果,泌水速率和累积泌水率较现行水泥配比和中联水泥的低,但水泥成本上升 2.13元/t和2.89元/t;粉煤灰因其密度低,且多为球状形貌,不利于水泥泌水性能;2%石灰石粉的加入,可降低水泥的泌水率和累积泌水率,其性能曲线与中联水泥的相近,水泥成本降低0.96元/t。     

粉煤灰基混凝剂的制备及在大麻废水中的应用

采用酸溶法以粉煤灰为基础原料 ,通过添加一定量的硫铁矿烧渣 ,制备成粉煤灰基复合混凝剂 ,确定了最佳工艺条件 .实验结果表明 ,影响混凝剂制备的主要因素是粉煤灰与硫铁矿渣的质量比、酸用量、浸取时间和温度 .此混凝剂对大麻废水中 CODcr去除率达 88% ,色度去除率可达 96.6%以上 ,具有沉淀快和污泥体积小等优点 .     

Studies on high-performance blended/multiblended cements and their durability characteristics

Number of blends were prepared by intergrinding clinker, gypsum, fly ash, calcined clay, microsilica and limestone in laboratory ball mill in varying percentages, and their physical properties such as fineness, consistency, setting time and compressive strength have been determined. The durability tests on selected compositions were also conducted by exposing the mortar cubes separately in 5% Na₂SO₄ and 5% NaCl solutions till the age of 90 and 180 days. The performance was observed by compressive strength development criteria after various length of exposure. Results have been discussed and found that the durability of blended cement is higher than the ordinary Portland cement.     

在线煤灰分检测技术在中国的应用

介绍了应用双能量γ射线透射法测量煤灰分的技术原理及特点;清华大学工程物理系采用该法研制的在线煤灰分仪应用在选煤厂可以指导生产,保证产品质量,提高选煤效率,还可用于介耗<2kg/t的重介质选煤厂及自动配煤系统,为企业创造了显著的经济效益。     

复合矿物功能掺合料对粉煤灰激活增强的研究

根据激发粉煤灰活性机理研制了一种复合矿物功能掺合料,针对其对粉煤灰活性激发增强效果进行了系统研究。结果表明,用Ⅱ级粉煤灰、复合矿物功能掺合料置代50%以上水泥配制的胶砂、普通混凝土和高性能混凝土的早期强度、后期强度均大幅度提高。其中强度等级C15-C100 的混凝土不仅单方可节约水泥 50%以上,而且其强度较单掺粉煤灰有显著提高,具有显著的经济和社会效益。     

利用粉煤灰生产SiC陶瓷原料

利用粉煤灰部分或全部代替石英砂,配以适量的锯末,在高温炉中特定的烧成制度下,采用SiO2-C还原法将粉煤灰中的二氧化硅与锯末中的碳结合制取高性能的SiC陶瓷原料。利用正交实验对合成工艺中的合成温度、保温时间、碳过量数进行了设计和探索性实验,并对合成产物中的碳化硅的含量进行了测试。研究表明,在经催化剂(FeCl26H2O)浸泡12小时,加入2%矿化剂,在1380℃的合成温度下,保温时间2小时,碳过量10%的情况下,生成的SiC陶瓷原料中SiC的含量在53.6%以上。