NiCuZn ferrite flakes prepared using a sol-gel bubble method and its magnetic properties

Ni_0.23Cu_0.11Zn_0.66Fe₂O₄ ferrite flakes, with thickness of about 8 μm and average diameter of 20-35 μm, were prepared using a sol-gel bubble method. Morphology, phase evolution, static and dynamic magnetic properties of the flakes and their composites were studied. Magnetic measurements showed that easy magnetization direction of the flaky filler composite was parallel to its sample plane. Composites made of silicone resins and flakes had higher complex permeability, which can be attributed to the reduction in demagnetization factor due to their flaky shapes. This sol-gel bubble method should be also applicable to fabricating flakes of other multi-component oxides.     

Structural, magnetic and dielectric properties of La2−xCaxNiO4+δ (x = 0, 0.1, 0.2, 0.3)

The synthesis, structural, magnetic and dielectric properties of a new type of high permittivity materials La_2−xCa_xNiO_4+δ (x = 0, 0.1, 0.2, 0.3) (abbreviated as LCNs) were reported. The samples were prepared through conventional solid state reaction route. Detailed structural information was retrieved by Rietveld refinement; normalized bond length and bond valence was calculated to investigate the compression/dilation effect of bonds and atoms in unit cell. It can be found all samples belong to K₂NiF₄ structure with space group I4/mmm. Doping of Ca in La₂NiO_4+δ shrinks the unit cell and makes the structure tend to become instable. Three types of (La, Ca)-O bonds, and two kinds of Ni-O bonds exist in LCNs. Along c axis there are alternately compressed (La,Ca)O₉ dodecahedra and lengthened NiO₆ octahedra. Room temperature magnetic measurements show that the materials are paramagnetic and Ca doping can improve the spontaneous magnetization. Furthermore, all samples have colossal values of the dielectric constant (?) at frequencies lower than 1 kHz. Interestingly, La_1.8Ca_0.2NiO_4+δ maintains its high permittivity at frequencies up to 1 MHz while La_1.7Ca_0.3NiO_4+δ has the lowest dielectric loss (tan δ). Calcium doping can effectively enhance ? and inhibit tan δ. The distortion of (La,Ca)O₉ dodecahedra can well explain their dielectric properties.     

Cobalt-iron cyanide hollow cubes: Three-dimensional self-assembly and magnetic properties

Cobalt-iron cyanide hollow cubes have been synthesized via a poly(vinylpyrrolidone) assisted solvothermal route. A unique formation process: self-assembly followed by Ostwald ripening process, has been put forward to take account for the construction of hollow cubes. The rod-like nanocrystals first assemble as porous cubes via an oriented attachment process. Then, the porous cubes undergo an Ostwald-ripening process, which create interior spaces and result in the formation of hollow cubes. The magnetic property investigation reveals that K_0.22Co_0.58Fe_2.2(CN)₆ hollow cubes exhibit a ferromagnetic behavior.     

Modeling radiative properties of nanoscale patterned wafers

Temperature nonuniformity in rapid thermal processing of wafers is a critical problem facing the semiconductor industry. One cause of the problem is the nonuniform absorption of thermal radiation in patterned wafers where the optical properties vary across the wafer surface. This paper presents a parametric study of the radiative properties of patterned wafers, considering the effect of temperature, wavelength, and polarization. The finite-difference time-domain (FDTD) method is employed to examine the effe...     

A novel continuous arterial spin labeling approach for CBF measurement in rats with reduced labeling time and optimized signal-to-noise ratio efficiency

Objective  To develop a continuous arterial spin labeling (CASL) perfusion imaging method for cerebral blood flow (CBF) measurement in rats with reduced spin-labeling length and optimized signal-to-noise ratio (SNR _f ) per unit time. Materials and methods  In the proposed method, the longitudinal magnetization of brain tissue water in the imaging slice is prepared into a proper state before spin-labeling, and a post-tagging delay is employed after spin-labeling. The method was implemented on a 4.7 T small animal scanner. Numerical simulations and in vivo experiments were used to evaluate the performance of the method proposed. Results  With the proposed method, absolute CBF could be measured accurately from normal rat with a spin-labeling pulse as short as 400 ms, and yet employing the same formula as that used in the conventional CASL perfusion imaging method for calculation. The method also showed improved SNR _f per unit time over the conventional CASL perfusion imaging method and the pulsed arterial spin labeling perfusion imaging method FAIR. Conclusion  Compared to the conventional CASL perfusion imaging method, the proposed method would be advantageous for CBF measurement in small animals having short vascular transit time in terms of SNR _f per unit time and other benefits brought by shortened spin-labeling pulse.     

5KW全数字控制单级隔离型功率因数校正变换器的研究

针对当前工业界某些应用场合对高功率等级、严格的谐波标准以及输入输出隔离等要求,本文提出了一种新的结合主电路拓扑和全数字控制技术的解决方案。文章采用单级隔离型全桥结构结合传统BOOST型PFC的输入电感和RCD钳位作为主电路,并融合数字控制方案,对中大功率单级隔离型PFC进行研究。分析了主电路工作原理,建立了小信号动态模型,并详细分析了基于该模型的数字控制设计方法。提供输入输出电气隔离的变压器,允许输出可以在较大范围内调整,既可以高于输出电压也可以低于输出电压,此外允许多路输出方案。因此,变压器的加主大大拓展了此类PFC变换器的使用场合。采用的数字控制方案,同时具有良好的动态响应特性和稳态调节特性。优异的动态调节特性可成功解决模拟控制引入的变压器偏磁现象。基于本文所提出的拓扑以及控制方案,制作了5kW输出功率且开关频率为55kHz的样机,验证了该变换器的优良性能,满载功率因数达到0．994,效率超过92％。     

TOPSwitch集成电路在DC/DC电源设计中的应用

文章介绍了PWM／MOSFET二合一的TOPSwitch系列集成电路及其在DC／DC电源设计中的应用，还介绍了基本反馈方式的DC／DC拓扑结构及其改进措施，并对由TOPSwitch集成电路构成的DC／DC电源进行了抗中子实验。     

Synthesis of Nearly Monodisperse Iron Oxide and Oxyhydroxide Nanocrystals

Uniform magnetite, hematite, and goethite nanocrystals were prepared through an attractive method based on an oleic acid/alcohol/water system. By adjusting the synthetic parameters (base concentration, alcohol content, categories of alcohols, etc.), the controlled synthesis of uniform magnetite, hematite, and goethite nanocrystals can be easily achieved. Detailed investigations on the effect of the experimental parameters on the morphology of the final products and the phase transitions among the magnetite, hematite, and goethite phases were carried out. Finally, a method of doping other metal ions into magnetite was developed and the magnetic properties of magnetite doped with different metal elements were studied.     

Rapid detection of Listeria monocytogenes in food by biofunctionalized magnetic nanoparticle based on nuclear magnetic resonance

In order to ensure the safety of food, particularly ready-to-eat (RTE) food, a sensitive and rapid method for the detection of foodborne pathogenic bacteria is always in high demand. An accurate and reliable detection method for Listeria monocytogenes has been developed based on the aggregation of biofunctionalized magnetic nanoparticles induced by specific binding between L. monocytogenes and antibody-modified nanoparticles, which results in the change of the transverse relaxation time (T2) of surrounding water protons of nanoparticles detected by nuclear magnetic resonance. The detection limit of this method is 3 MPN (using the most-probable-number (MPN) assay) and the functionalized Fe/Fe₃O₄ nanoparticles exhibit a high specificity with the existence of other interfering bacteria. Furthermore, this detection method is successfully applied to detect L. monocytogenes in milk powder and lettuce. This method could be a useful tool for sensitive and rapid detection of foodborne pathogenic bacteria.