Bench-scale tests to determine mechanisms of charge generation due to particle-particle and particle-wall contact in binary systems of fine and coarse particles

Bench-scale methods were utilized to determine changes in electrostatic charges and their mechanisms for various coarse and fine particles as they came into contact with each other and/or their containing vessel walls. Techniques included shaking tests and particle-copper plate contacting experiments. Electrostatic behaviour of coarse particles (glass beads and polyethylene) and fine particles (Larostat 519, glass beads and silver-coated glass beads) were investigated. Shaking tests resulted in charge separation in which the fine particles acquired significant positive charges, opposite to those carried by the large particles. In copper-plate contacting tests, charge transfer occurred between the fines and the copper plate with fines carrying away almost all of the initial charges on the plate followed by further charge separation. Charge separation was found to be the dominant charging mechanism between the coarse particle and copper plate, with the particles becoming negatively charged.     

多孔陶瓷分离膜

多孔陶瓷膜由于其优良的耐高温、耐腐蚀、耐微生物侵蚀等性质，近年来被快速地应用于分离领域。本文介绍其制备方法、性能测定及应用前景。     

液-液水力旋流器中的液滴破碎

在总结前人研究成果的基础上,分析了液-液水力旋流嚣中液滴破碎产生的原因,指出流场的湍流特性是产生液滴破碎的主要原因。对水力旋流器中的湍流度、雷诺切应力及颗粒的湍动能进行了分析,给出了水力旋流器中液滴破碎可能性较大的几个部位,并对旋流器边壁液滴破碎的可能性进行了讨论。分析了水力旋流器中液滴破碎的机理,阐明了液滴破碎判据——临界Weber数的表达式,并对理想球形液滴的破碎进行了分析。     

Fundamental characterization of SBS‐modified asphalt mixed with sulfur

The purpose of this study was to characterize the mechanical behavior of asphalt modified by styrene–butadiene–styrene (SBS) and sulfur. Viscosity, microscopy, and rheological tests were conducted to understand the engineering properties of the polymer‐modified asphalt (PMA). Without the addition of sulfur, the polymer‐modified asphalt was microheterogeneous and was made up of two distinct finely interlocked phases, especially at high SBS concentrations. After the addition of sulfur, the PMA was observed to have smaller asphalt domains and a fairly homogeneous dispersion of the asphalt in the SBS matrix. The compatibility between polymer and asphalt produced an elastic network into the asphalt. The addition of sulfur resulted in an excellent elastic system and substantially increased the rheological properties of the PMA. Because of the colloidal nature of asphalt cements, their engineering properties were greatly improved because of the reinforcement of the SBS polymer and the physical‐chemical interaction between SBS and asphalt. The difference in the softening point between the top and bottom layers decreased significantly, and elastic recovery increased when was sulfur was present. A viscoelastic model was examined and shown to be appropriate for predicting the rheological properties ofthe asphalt–SBS blend mixed with sulfur. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2817–2825, 2007     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

常见塑料溶解性能研究及其混合物的选择性分离

以常见塑料为原料,以有机物为溶剂,研究了塑料在有机溶剂中的溶解性能,提出了选择性分离混合塑料的方案。结果表明,实验所选用的塑料在有机溶剂中的溶解性能和溶解条件不同;可利用塑料与有机溶剂的相容性差别分离混合塑料。     

钌钯双金属催化剂固载顺序控制及性能

以Al_2O_3、PdCl_2和RuCl_3为原料,采用水溶液浸渍法,通过控制固载顺序、制备流程以及焙烧温度等条件,制得系列负载型Ru Pd双金属催化剂,并用于对苯二甲酸二甲酯(DMT)制取1,4-环己烷二甲酸二甲酯(DMCD)的选择性加氢过程。其中,Ru和Pd的总负载量为0.3%(以催化剂总质量为基准,下同),且m(Ru)∶m(Pd)=1∶1。结果发现,采用先Ru后Pd(Ru-Pd)式固载顺序和浸渍-干燥-浸渍-干燥-焙烧(IDIDC)型制备流程,并在450℃下焙烧后,所得负载型Ru-Pd双金属催化剂的反应性能最佳,在6 MPa、180℃下,DMT转化率为89.6%,DMCD选择性为96.0%,DMCD产率为85.9%。这可能与Ru-Pd中大粒径粒子的形成受到抑制、粒径尺寸和分布更小、比表面积和总孔容更高、表面Pd原子摩尔分数较高以及Ru/Pd物质的量比较低有关。     

甲醇吹除气中氢的回收方法

对目前甲醇吹除气中氢回收的两种方法进行了比较、分析。     

C8芳烃中二甲苯和乙苯的分离技术进展

论述了用于C8芳烃中二甲苯异构体以及乙苯分离的各种吸附分离技术进展,对各种工艺和特点以及工业应用状况进行了分析比较。详细介绍了目前国内C8芳烃吸附分离装置中的工业生产状况和面临的问题及挑战。提出应抓紧开发具有自主知识产权的C8芳烃吸附分离技术,尤其是开发一种对乙苯和二甲苯同时具有高选择性、高吸附能力、容易脱附的吸附剂,实现从C8芳烃中同时得到乙苯和二甲苯高纯度产品的目的,打破国外的技术垄断。     

分子蒸馏技术与日用化工(Ⅰ)——分子蒸馏技术的原理及特点

介绍了分子蒸馏技术发展简况，并从分子运动平均自由程的定义出发，介绍了分子蒸馏技术的基本原理、特点以及与常规蒸馏、超临界萃取与层析分离等方法的不同。分子蒸馏操作温度低、受热时间短及分离效率高，特别适用于热敏性物质的提纯，有广阔的应用前景。