甲醇装置高效分醇技术及双"零"节能工艺

针对甲醇分离系统存在的普遍性问题 ,提出了“少醇无水”工艺技术并进行了工业实际应用。在“少醇无水”工艺的基础上 ,又提出双“零”工艺的构思。分别对该两种工艺进行了经济效益分析。结果表明 :“少醇无水”工艺可使入塔醇含量由0 .987%降至 0 .5 62 % ,装置能力提高 6.0 %～ 11.12 % ;双“零”工艺可使 10万t/a甲醇装置生产能力提高 2 2 .0 0 %。     

海上溢油漂移扩散的数值模拟

该文基于三维自由水面垂向分层动网格的Euler-Lagrangian模式,采用VC方式(Vertex-Centered)的非结构化有限体积方法离散三维浅水方程,模拟渤海的潮汐水流运动过程。以此为水动力背景场,采用油、水分离的Lagrangian粒子追踪模型,对渤海海域发生的溢油漂移扩散问题进行模拟。其油品的蒸发、乳化和溶解等风化作用以引入综合衰减系数的方式考虑。模型对油膜的漂移路径、厚度和面积进行了实时模拟和预测,用多个测站的同步连续实测值对水动力模式进行了参数率定与模型验证,油膜输运扩散的计算结果也与相关报告数据进行了对比,均吻合良好,说明模型具有较高的可靠性与重现性。     

Friction of linerboard based on recycled fiber

The purpose of this investigation was to study the origin of the differences in paper‐to‐paper friction of linerboards based on old corrugated containers (OCC). The sheets were subjected to two extraction stages and analyzed with respect to, surface roughness, and their content of low‐molecular‐mass lipophilic compounds (LLC). Friction was measured using a friction tester based on the horizontal plane principle. The surface roughness was measured using a Perthometer profiler and the low molecular mass lipophilic constituent of the paper sheets was determined by gas chromatography‐mass spectroscopy. The sheets were imaged using environmental scanning electron microscopy (ESEM), and the relative compositions of inorganic ions on the paper surfaces were determined by energy dispersive X‐ray spectroscopy (EDS). The results showed that a high amount of LLC in the sheets lead to low friction, due to lubrication. It was also observed that large CaCO₃ particles on the surface had a friction‐increasing effect, and that there was no relationship between the surface roughness and the friction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1511–1520, 2002     

The Influence of Diphenyl Siloxane on Morphology and Physical Properties in the Poly(Imide Siloxane)(PIS) Copolymer

Various numbers of diphenyl-siloxane groups were incorporated in α,ω-bis(aminopropyl)polydimethylsiloxane (APPS) to prepare α,ω-bis(aminopropyl)-polydimethyldiphenylsiloxane (APPPS) oligomers of three different number-average molecular weights(Mn = 547,772,1210 g mol⁻¹).These APPPS oligomers were than used, together with 3,3′,4,4′-bezonphenone tetracarboxylic dianhydride (BTDA) and 2-2′-bis[4-(3-aminophenoxy)phenyl] sulfone (m-BAPS), to synthesize a series of APPPS containing poly(imide siloxane) (PIS) copolymers. Microstructural studies showed that at certain APPPS content, a critical microphase separation point existed, beyond which, microphase separation began to develop. This critical point of microphase separation was found to be affected by the Mn of the APPPS oligomers (8.0, 4.3 and 2.1 mol% for Mn of 547, 772 and 1,210 g mol⁻¹, respectively). Diphenyl-siloxane significantly improved compatibility between polyimide and polysiloxane segments. Physical studies showed that the introduction of diphenyl siloxane changed the thermal stabilities and mechanical properties of the PIS copolymers. These findings have potential applications for design purposes in engineering polymers.     

Gel-size dependence of temperature-induced microphase separation in weakly-charged polymer gels

The gel-size dependence of microphase separation in weakly-charged gels of N-isopropylacrylamide (NIPA) and 1-vinylimidazole (VI) copolymers has been investigated using swelling measurement, small-angle neutron scattering (SANS), and dynamic and static light scattering (DLS/SLS). It is known that weakly-charged polymer gels undergo microphase separation in a poor solvent as a result of competing interactions involving hydrophobic attraction versus electrostatic repulsion. The microphase separation is characterized by a scattering maximum in SANS intensity functions of which Bragg spacing, Λ, is around 20-30 nm. However, when gel size was reduced to the order of Λ, no microphase separation was observed. Instead, a typical scattering of isolated spherical particles was clearly observed. On the basis of the experimental evidence, we conclude that microphase separation has its own wavelength independent of gel size, and nanometer-order gels, i.e., nanogels, do not undergo microphase separation.     

Silane functionalization of perfluoroether oligomers for reaction management and morphology control of two‐phase epoxy networks

Mixtures of an epoxy resin, hardener, and acid functionalized perfluoroether oligomers will readily undergo phase separation during curing. However, the conditions to bring about the growth of nuclei into microscopic particles have hitherto been found only for systems cured with anhydrides. In the present study perfluoroether oligomers were functionalized by established procedures to introduce both carboxylic acid groups and alkoxysilane groups in sites within the chain extended segments. The presence of alkoxysilane groups together with the prereaction step with an excess epoxy resin, prior to the addition of the aromatic amine hardener, induced phase separation by a nucleation‐and‐growth mechanism. The dual functionality in the perfluoroether oligomer was even more beneficial when the alkoxysilane groups were hydrolyzed prior to the addition of the amine hardener. Under such circumstances the precipitation of the perfluoroether oligomer occurred quantitatively, as indicated by the complete absence of any plasticization effects in the epoxy matrix. From electron microscopy examinations, thermal analysis, and measurements of mechanical properties it was possible to deduce a plausible mechanism for the formation of the typical core‐shell aggregates within the precipitated particles for these systems, which could also be applied to other systems, such as those using carboxylic‐acid‐terminated butadiene acrylonitrile oligomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1036–1049, 2005     

用唐钢石人沟铁精矿生产超级精矿

以石人沟铁矿精矿粉为原料生产超级铁精矿，进行了磨矿—反浮选、分级—反浮选和分级—低磁场磁选等试验，并按磨矿—反浮选方案建成了生产超级铁精矿的选矿厂。实践证明阳离子反浮选是生产低硅高纯铁精矿的可靠工艺。     

断续流对旋流器油水分离效率影响的实验研究

目前,大部分井下油水分离的旋流器由地面游梁式抽油机通过抽油杆柱提供能量,这样进入旋流器流量产生断续现象。通过实验证明断续流流量的不连续性使旋流器油水分离效率下降5％以内,存在一定负影响;溢流含油浓度越高,断续流对旋流分离效率的负影响也越大,所以井下油水分离过程中,不能偏面追求过高的溢流口含油浓度,提高分流比F与入口含油浓度C_i比值,减小断续流对分离效率的影响。     

液固分离技术的进展

本文简述了液固分离技术近年来的进展。特别涉及加压电过滤设备、毛细吸附作用下的真空过滤机、动态过滤技术、新型卧式螺旋卸料沉降离心机、滤材等方面技术的国内外进展情况。     

构树皮丙酮抽出物的DEAE—Sephadex分离及GC—MS分析

利用ＤＥＡＥ—Ｓｅｐｈａｄｅｘ分离柱及ＧＣ—ＭＳ对构树皮丙酮抽出物 进行了分离和分析．在丙酮抽出物中中性组分占抽出物的５９．７％，弱酸性 组分和强酸性组分分别占２５．９％和１０．３％．中性组分中不皂化物占 ８９．２％，皂化物仅占８．４％．不皂化物的成分比较复杂，所检出的主要有 甾醇和甾酮类．皂化物中亚油酸占５０％，软脂酸占２１％．弱酸性组分中 ５０％以上是脂肪酸（亚油酸和软脂酸），而没有松香酸．