高压水射流射孔井眼应力数值模拟研究

水力射孔技术是一种新型完井方式,利用深穿透水力射孔技术辅助定向压裂,可实现油层改造和油井增产。考虑套管水泥环的影响,采用有限元理论结合ANSYS软件计算了高压水射流水力射孔井眼周围的应力,重点分析了水力射孔参数对井周应力的影响规律,初步研究了直井水力压裂时水力射孔对裂缝起裂的影响。计算结果表明,沿最大水平地应力方向布孔时,孔眼根部的周向拉应力最大,裂缝将会在孔眼根部起裂;选择合理水力射孔参数可有效降低地层破裂压力。研究结果可为高压水射流水力射孔辅助定向压裂提供参数优选的依据。     

Structural Appraisal of the Florentine Gothic Construction System

The nave of Santa Maria Novella, a Dominican church in Florence Italy is representative of a Florentine Gothic system of construction. This system, consisting of domical rib vaults on square nave bays, high side aisles, and crypto-buttressing, differs substantially from the French high Gothic system of even-level-crown rib vaults on rectangular bays, with flying buttresses over relatively low aisles. An investigation into the structural aspects of the Florentine Gothic construction system reveals that the domical vaults increase the longitudinal thrust and reduce the transverse thrust, which may require additional precautions to be taken during construction, but entails a less elaborate buttressing system. The domical vaults are found to perform well structurally, with an absence of tensile stresses, and are more suitable for a square bay. In general, the structural system of the nave of Santa Maria Novella is found to be the product of carefully considered structural design, which may be accepted as an alternative to the French Gothic construction system.     

Facility layout problems: A survey

Layout problems are found in several types of manufacturing systems. Typically, layout problems are related to the location of facilities (e.g., machines, departments) in a plant. They are known to greatly impact the system performance. Most of these problems are NP hard. Numerous research works related to facility layout have been published. A few literature reviews exist, but they are not recent or are restricted to certain specific aspects of these problems. The literature analysis given here is recent and not restricted to specific considerations about layout design.

We suggest a general framework to analyze the literature and present existing works using such criteria as: the manufacturing system features, static/dynamic considerations, continual/discrete representation, problem formulation, and resolution approach. Several research directions are pointed out and discussed in our conclusion.     

利用多普勒信息的波达方向最大似然估计方法

为了充分利用信号的时域特性来改善信号波达方向（ＤＯＡ）的估计性能，本文从最大似然估计出发，推导出了有限快拍，低信噪比情况下多普勒信号波达方向的迭代估计计算法，为进一步减小运算量，本文还推导了一种简化算法，本文提出的两种算法对低信噪比，少快拍数下多普勒信号的ＤＯＡ估计性能比不利用时域特性的ＭＬ方法有明显改善，Ｍｏｎｔｅ－Ｃａｒｌｏ实验验证了本文方法的有效性。     

带限信号高频重建的一种新的正则外推算法

本文提出生种新的带限信号的外推方法，该方法能够很好地抑制噪声干扰，且计算复杂性较低，本文给出算法，证明了收敛性，最后给出了误差计算机实验结果。     

变形温度和变形程度对Ti－31合金性能和组织的影响

通过高温和室温拉伸试验，研究了变形温度和变形程度对Ｔｉ－３１合金板材性能和组织的影响。结果表明，合金在７５０～８５０℃的温度下变形５％～２０％空冷后，其室温机械性能均能达到材料的技术指标要求。并发现了材料在９００℃的临界变形区。     

河口水流、波浪、潮流、泥沙、河床变形二维数学模型

根据河口“波浪掀沙，潮流输沙”的泥沙运动机制，引入“波浪幅射应力”反应波浪对水体和泥沙的驱动力．考虑波浪对底部泥沙作用力、波浪对水流挟沙能力的影响及风场对水流和泥沙运动的影响．同时考虑泥沙粒径大小、水体含盐度、含沙量及水流紊动程度等因素对絮凝沉速的影响．用ＡＤＩ算法求解沿水深平均方程，破开算子法解悬移质不平衡输沙方程及河床变形方程，引入通度概念处理岸滩不规则边界，建立河口水流、波浪、潮流、泥沙、河床变形二维数学模型．通过实测资料及卫星摇感图像对所建数学模型进行检验，表明它可以较好地预测河口泥沙的运动     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

具有减少辨识参数的随机多变量极点配置自适应控制器

本文提出了一种新的限制输出个数减少随机多变量自适应控制中辨识参数的方法，并给出了减少辨识参数的极点配置自适应算法。虽然采用ｎ个输入１个输出的减少辨识参数的模型来设计控制器，但所提出的控制器能够保证被控系统的几个输出跟踪参考输入信号，仿真结果表明，所提出的方法是成功的。     

注塑件熔接缝结构,性能评价及影响因素

文章介绍了熔接缝形成的原因，接缝类型，接缝外观和断口形态特征以及接缝性能评价方法。分析了接缝类型，塑料材料性质，工艺参数和其它因素对接缝性能的影响。