基于电子鼻的香蕉储存时间鉴别方法研究

研究了一种基于电子鼻系统的香蕉储存时间鉴别方法。实验检测了不同储存时间的香蕉样品,主成分分析方法可以较好地区分不同储存时间的香蕉样品,同时检验了样品的微生物指标以探讨电子鼻响应与微生物指标之间的关系。随机共振信噪比谱不但可以区分香蕉样品,同时基于信噪比特征值建立的香蕉储存时间鉴别模型具有较高的预测准确率。该方法具有较好的实际应用价值。     

一种基于相关函数法铁磁谐振波形研究

对铁磁谐振波形进行了系统的分类分级,提出了一种基于Matlab的相关函数方法,并且利用大量数据进行对比,已经得到了效果验证,经过桂林市电力电容器责任有限公司认证,具有良好的实际效果。     

Structure, hyperfine interactions and magnetization studies of mechanically alloyed Fe50Ge50 and Fe62Ge38

X-ray diffraction, Mössbauer spectroscopy and magnetization measurements were used to study the structure and some magnetic properties of Fe₅₀Ge₅₀ and Fe₆₂Ge₃₈ prepared by mechanical alloying from the elemental powders. In both cases in the early stages of milling the intermediate paramagnetic FeGe₂ phase was formed. The mechanical alloying process of Fe₅₀Ge₅₀ resulted in the formation of the paramagnetic FeGe (B20) phase with an average crystallite size of about 15 nm. In the case of the Fe₆₂Ge₃₈, the ferromagnetic Fe₅Ge₃ (β) phase with a Curie temperature of about 430 K was obtained. The average crystallite size was about 9 nm. The average hyperfine magnetic field of about 16 T allowed it to determine that more than four germanium atoms exist in the nearest environment of the ⁵⁷Fe isotopes in the Fe₅Ge₃ phase.     

CNC齿轮测量中心驱动控制与传动系统设计

描述了CNC齿轮测量中心的工作特点，着重介绍了测量中心驱动控制系统及机械进给系统的设计，并对机械传动系统的性能进行了分析，验算了主要设计参数。该测量机测量精度高，性能稳定，已开始小规模生产。     

Activation of hydrogen storage materials in the Li–Mg–N–H system: Effect on storage properties

We investigate the thermodynamics, kinetics, and capacity of the hydrogen storage reaction: Li₂Mg(NH)₂ + 2H₂  Mg(NH₂)₂ + 2LiH. Starting with LiNH₂ and MgH₂, two distinct procedures have been previously proposed for activating samples to induce the reversible storage reaction. We clarify here the impact of these two activation procedures on the resulting capacity for the Li–Mg–N–H reaction. Additionally, we measure the temperature-dependent kinetic absorption data for this hydrogen storage system. Finally, our experiments confirm the previously reported formation enthalpy (ΔH), hydrogen capacity, and pressure–composition–isotherm (PCI) data, and suggest that this system represents a kinetically (but not thermodynamically) limited system for vehicular on-board storage applications.     

机械振动对Sn-Sb合金β相的影响

初步探讨了机械振动对Sn-Sb合金β相在基体中分布的影响,重点讨论了在不同振击力作用下对Sn-Sb11合金中β相(SnSb)偏析和细化的影响效果.试验表明,在不同振击力作用下,合金晶粒以及组织明显得到改善,而且随着振击力的增大,组织均匀化程度的改善效果呈明显上升趋势.分析结果表明,这是由于强烈的振动对金属液体的搅拌以及促使合金液晶粒(或晶团)的游离作用的缘故.     

参激随机共振及纠错码技术的应用

为了有效地降低数字信号传输过程中的比特误码率,提出了纠错编码与参数调节随机共振技术的结合.在经过噪声污染后,依据参数调节随机共振技术的性质,给出通过系统参数调节的二进制脉冲幅值调制（PAM）输入信号的渐近误码率公式,应用纠错码技术采用中间值估计的方法得到修正的比特误码率.数字仿真试验证实,理论计算结果与试验结果相吻合,纠错码技术与参激随机共振技术的结合应用于二进制基带信号传输,可以降低误码率,从而可以得到更好的效果,提高通信的可靠性和有效性.     

Role of Chiral Configuration in the Photoinduced Interaction of D- and L-Tryptophan with Optical Isomers of Ketoprofen in Linked Systems

The study of the L- and D-amino acid properties in proteins and peptides has attracted considerable attention in recent years, as the replacement of even one L-amino acid by its D-analogue due to aging of the body is resulted in a number of pathological conditions, including Alzheimer’s and Parkinson’s diseases. A recent trend is using short model systems to study the peculiarities of proteins with D-amino acids. In this report, the comparison of the excited states quenching of L- and D-tryptophan (Trp) in a model donor–acceptor dyad with (R)- and (S)-ketoprofen (KP-Trp) was carried out by photochemically induced dynamic nuclear polarization (CIDNP) and fluorescence spectroscopy. Quenching of the Trp excited states, which occurs via two mechanisms: prevailing resonance energy transfer (RET) and electron transfer (ET), indeed demonstrates some peculiarities for all three studied configurations of the dyad: (R,S)-, (S,R)-, and (S,S)-. Thus, the ET efficiency is identical for (S,R)- and (R,S)-enantiomers, while RET differs by 1.6 times. For (S,S)-, the CIDNP coefficient is almost an order of magnitude greater than for (R,S)- and (S,R)-. To understand the source of this difference, hyperpolarization of (S,S)-and (R,S)- has been calculated using theory involving the electron dipole–dipole interaction in the secular equation.     

压铸条件和淬火时效对GD—AlSi9Cu3合金力学性能的影响

通过改变压铸工艺参数和淬火时效，测定在静态载荷和动态循环载荷下ＧＤＡｌＳｉ９Ｃｕ３合金的力学性能和断裂力学性能，试验所获得的数据可用来估算压铸件的失效风险率     

Role of deposition parameters on microstructure and mechanical properties of chromium oxide coatings

Chromium oxide coatings were deposited by reactive magnetron sputtering on high speed steel (HSS) substrate under various oxygen flow rates and radio frequency (RF) powers. The effect of deposition conditions on the microstructure, hardness and critical load of chromium oxide coating failure was studied. The results indicated that a crystalline chromium oxide coating formed at a high oxygen flow rate and a low RF power exhibited a higher hardness and a lower critical load as compared to a chromium oxide coating with an amorphous microstructure.