Recovery of pyruvic acid with weakly basic polymeric sorbents

BACKGROUND: Carboxylic acids are among the most important substances that can be manufactured from biomass. However, the recovery of carboxylic acids from fermentation broths presents a challenging separation problem. To avoid the production of waste salts and net consumption of chemicals in the calcium carboxylate salt process, the use of reversible chemical complexation with polymeric sorbents and extractants is attractive for carboxylic acid recovery. Pyruvic acid is widely used in the manufacture of medicines, pesticides and foodstuffs and can be produced by fermentation. Since the acidity of pyruvic acid (pK_a = 2.49) is stronger than that of normal carboxylic acids, and as few reports on the recovery of pyruvic acid are available, the sorption of pyruvic acid from aqueous solution on two types of weakly basic polymeric sorbent, tertiary amine D301R and primary amine D392, was investigated over a wide pH range and at various salt (MgSO₄) concentrations. RESULTS: Overloading adsorption of pyruvic acid on both weakly basic polymeric sorbents occurred, with the overloading of D392 being greater than that of D301R. The adsorption of pyruvic acid on both sorbents was greatly affected by the solution pH and the salt concentration in the aqueous phase. An overloading model was able to predict the experimental uptake data very well. CONCLUSION: Solution pH is one of the most important operating conditions, and both polymeric sorbents D392 and D301R can be used to recover pyruvic acid from dilute aqueous solution with high efficiency at a solution pH around 2. The uptake by D392 is greater than that by D301R owing to steric hindrance of the tertiary amine. Copyright © 2008 Society of Chemical Industry     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface adsorption of comb polymers by Monte Carlo simulations

This paper reports off-lattice Monte Carlo simulations of highly-branched comb homopolymers weakly adsorbed on a flat, featureless surface showing only covolume and dispersion interactions with the adsorbate. A minimal coarse-grained model, described by hard spheres connected by harmonic springs, was employed. The interaction energy of the adsorbed combs and linear chains is first discussed as a function of the molecular mass and of the number of beads in contact with the surface. The molecular size is then investigated as a function of backbone length and branching density at a fixed arm size. The apparent swelling exponents of the adsorbed combs are larger than those of the corresponding linear chains, and much larger than that of the free molecules. This result indicates a surface-induced stiffening of the comb backbone, further studied through the persistence length l_pers. It is found that l_pers increases upon adsorption over the free-molecule value, more so the larger is the branching density. Finally, the thickness of the adsorbed layer, the surface-induced molecular anisotropy and the molecular aspect ratio are investigated as a function of branching density and molecular mass.     

A source apportioned mercury mass balance across a coal-based petrochemical complex

Coal-fired power generation facilities are the largest single anthropogenic source of mercury to the atmosphere. Global mapping of anthropogenic emissions has previously estimated the mercury emission from stationary combustion from South Africa at being 82.6 tonnes per annum, but preliminary in-house calculations have placed this at a significantly lower amount. A petrochemical facility in South Africa, utilising a significant amount of coal in its gasification and steam generation processes, undertook a project to determine a mercury mass balance across the complex, and to apportion the Hg emissions from the facility.     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

分形理论在固体吸附式制冷系统中的应用研究

固体吸附式制冷系统中吸附剂一般是多孔介质结构，吸附剂的内部结构特征对传热特性和吸附质的传质特性有直接影响，进而影响吸附解吸时间。本文探讨利用分形理论来分析固体吸附剂的结构特点，为目前通过对吸附剂的固化处理来提高吸附剂的传热速率的处理方法提供理论上的分析，并指出最佳分形维数的分形结构。     

Interaction of H2,n-butane and cis-2-butene with Pt and Pt In in NaY: a microcalorimetric study

Pt NaY and Pt In NaY adsorption properties have been compared by using probes like H₂, C₄H₁₀, 2-C₄H₈ and microcalorimetry. It appears that the addition of In to Pt does not change the initial heat of H₂ chemisorption but decreases the initial heat of butane and butene chemisorption.     

Quantum chemical SINDO1 study of vanadium pentoxide

An improved set of parameters for vanadium in the semiempirical quantum chemical SCF MO method SINDO1 is presented. It is shown that both the geometries and heats of formation of a number of vanadium-containing compounds calculated by this method are in good agreement with available experimental data. Model clusters of increasing size are used for the study of geometric and energetic properties of vanadium pentoxide. Both hydrogen atom and proton adsorption on the (010) surface of vanadium pentoxide and a subsequent formation of different oxygen vacancies have been investigated. Based on these computational results the reactivities of V₂O₅-surface oxygen atoms for adsorption are discussed.     

几种吸附式致冷新工质对的性能预测

应用吸附平衡基本理论对几种可能的吸附式致冷新工质对的性能进行了预测。结果表明，烷烃系列的低混点工质与沸石的配对体系是不可取的，而沸石－氨、活性炭－丙酮、活性炭－氨及活性炭－乙醇则是沸石－水、活性炭－甲醇体系的适宜的替代物。     

Methanol adsorption and dehydration on alkali metal exchanged NaY zeolites

FT-IR spectroscopy has been applied in a study of methanol adsorption on M^INaY zeolites (M=Li, K, Rb, Cs). Coordinatively and/or hydrogen bonded methanol was registered in the temperature range 300–473 K. Dehydration of methanol to dimethyl ether occurred at 573 and 623 K. It was found that the activity of the catalyst for methanol dehydration strongly depends on the kind of alkali metal cation, and well correlates the IR data relative to methanol adsorption.