抗盐降滤失剂SDX的研究与应用

介绍了抗盐降滤失剂SDX的合成方法与现场应用简况,评价了SDX的抗温、抗盐、防塌及配伍性能。试验结果表明,SDX能耐150℃以上的高温,可抗盐至饱和,具有良好的降滤失和抑制性能,与其它处理剂的配伍性好,适用于各种水基泥浆。     

中小型变压器供电电机起动方式的选择

通过分析和计算及实例，从允许电压降范围和电动机母线电压校验两方面叙述了电动机起动时如何合理地选择起动的方式。     

五强溪水电站缆索起重机的安装与使用

五强溪水电站主体工程混凝土浇筑垂直运输在大坝两岸分高、低层布置４台平移式２０ｔ缆索起重机。其中２台高缆从德国引进，属世界上首次采用全遥控的缆机，同时也是国内塔架最高的缆机；２台低缆属我国目前自行设计制造安装的规格最大、速度最高的缆机。     

9．5－32mm波段大气衰减随仰角变化的实验研究

在实测和分析３２、１４．６、１２．５和９．５ｍｍ波段大气衰减的基础上，研究了大气衰减随仰角变化的规律；讨论了仰角为３～９０°时计算大气衰减的简化计算公式；给出了大气等效高度与地面水汽密度的关系式，对大气衰减和等效高度的实测值与理论值进行了比较和分析．     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。     

安居水电厂灯泡贯流式水轮发电机组的试运行

本文对安居水电厂2台灯泡贯流式水轮发电机组自投入试运行以来,出现的受油器壳体开裂、导叶接力器缸体和活塞拉伤、转轮桨叶传动拐臂连接销脱落、导叶外轴承座漏水、主轴工作密封漏水侵入水导轴承、锁锭装置固定螺钉剪断等故障的经过、原因分析及其处理办法进行了叙述。     

陕甘宁盆地中部奥陶系风化壳储层特征

陕甘宁盆地中部奥陶系风化壳碳酸盐岩储集层属于古岩溶型,主要储集空间是溶蚀孔洞。本文根据古岩溶成因及发育特征,利用毛细管压力曲线、铸体薄片、阴极发光及物性分析资料,综合研究了碳酸盐岩储层参数及其分布特征,探讨了孔、洞、缝组合关系并划分出4种储层类型,判别了储层的有效性,为天然气勘探及储量计算提供了地质基础资料。     

高温过热器12Cr2MoWVTib（102）钢管的显微组织和相结构分析

本文对原始状态和在火力发电厂使用不同时间的高这热器１０２钢管进行了显微组织和相结构变化规律的探讨和研究。显微组织研究表明，１０２钢管在高温高压下长期运行过程中，使用温度对显微组织和碳化物相有明显影响，而使用时间对其影响不如温度影响强烈。碳化物颗粒图象分析表明，碳化物随着使用时间缓慢长大，而新的碳化物不沉淀，使颗粒总数不断增加，颗粒，间距逐渐缩小。Ｘ射线衍射数据证明，钢管在高温长期使用过程中，ＭＣ相     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.