Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

The emulsifying properties of a polysaccharide isolated from the fruit of Cordia abyssinica

Polysaccharide was isolated from Cordia abyssinica and its effect, at differing concentrations, on its emulsifying ability was determined. Emulsions of vegetable oil containing up to 1% of the polysaccharide in phosphate pH 7.4 buffer, were prepared by using a hand piston homogenizer. Emulsification was assessed by diluting samples of the emulsions in sodium dodecyl sulphate and measuring absorbance at 500 nm. Addition of increasing concentrations of the polysaccharide up to 1% enhanced emulsification and emulsion stability. Above 1% concentration the polysaccharide solutions were too viscous for making emulsions conveniently. At a constant concentration of the polysaccharide, addition of up to a 1% concentration of salt enhanced emulsion formation. Further addition of salt above 1% resulted in no further changes in emulsifying ability, but the stability of the emulsions formed decreased on increasing the concentration of salt above 1%. The effect of pH on emulsifying ability was investigated by preparing emulsions using buffers of different pH, from pH 3 to pH 13. The polysaccharide had poor emulsifying ability below pH 7. Emulsifying ability increased with pH between pH 7 and 11. At pH above 11 there was a decrease in emulsifying ability.     

中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究

针对中原油田高温(>80℃)、高盐度(>50 g/L)、高硬度(>1 g/L)砂岩油藏,研制了地下成胶的高热稳定性聚合物凝胶调剖剂。所用聚合物为疏水缔合聚合物AP-P4,M=9.0×106,HD=27%,疏水基摩尔分数0.2%;交联剂为可生成酚醛树脂的3种化合物;调剖剂胶液用矿化度160 g/L的马寨油田污水配制;实验温度95℃。根据形成的凝胶黏度(95℃,1.1 s-1)确定交联剂各组分用量为:MZ-YL 0.429%,MZ-BE 0.060%,MZ-XS 0.012%;酸度调整剂用量0.12%;成胶时间10~15小时。2.5、3.0、3.5 g/L AP-P4的凝胶在95℃老化100天后黏度保持在~40 Pa.s及以上。初配制胶液在3000 r/min下剪切15分钟后黏度降低87.5%~89.0%,但成胶后和老化过程中凝胶黏度只比未剪切样降低17.1%~6.6%。3.5 g/L AP-P4的调剖剂对~1μm2的6支储层岩心的堵塞率在88.1%~95.8%范围,平均93.3%,造成的残余阻力系数在15.2~28.6范围,平均19.8,使渗透率级差2.3~8.0的4组双人造岩心的注水流量比发生不同程度的反转。认为该凝胶调剖剂高温下稳定性好的原因,是强化学交联密度低,因而凝胶脱水收缩作用弱。图2表5参5。     

谐振式力传感器对其晶振频率稳定度的要求

为了寻找石英晶振频率稳定度对传感器影响的判据,根据石英谐振式力传感器的灵敏度阈值和量程与晶体的相关常数及结构参数间的关系,导出了反映谐振式力传感器研究水平的指标参数与晶体结构参数及晶振频率稳定度之间的关系式,为传感器的研究提供了依据。例如,欲制作量程阈值比达到105量级的传感器,所用晶振的频率稳定度必须优于108。     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

Boundary Procedures for Summation-by-Parts Operators

Four different methods of imposing boundary conditions for the linear advection-diffusion equation and a linear hyperbolic system are considered. The methods are analyzed using the energy method and the Laplace transform technique. Numerical calculations are done, considering in particular the case when the initial data and boundary data are inconsistent.     

Electrostatic destabilization of water-in-crude oil emulsions: Application to a real case and evaluation of the Aibel VIEC technology

In the current study, the Aibel Vessel Internal Electrostatic Coalescer (VIEC) technology was tested for a real case scenario encountered in the production train of a UK oil field. Depressurized samples were collected both upstream and downstream of the first stage separator. The separation performance was discussed with respect to water cut and droplet size distribution of the emulsions, and the effect of chemical treatment. Issues with respect to representative sampling and testing have been discussed. The application of an external AC electrical field has been shown to significantly enhance the separation of the aqueous phase from tight emulsions, both when it was used alone and in combination with a commercial demulsifier. By using the VIEC technology, the time for separation could be reduced from 8 min to 2 min and the overall BS&W in the emulsions was improved from 45% or 60% to a residual water content of 5-20%. Destabilization of a 45% water-in-oil emulsion by electrical and chemical treatment (20/40 ppm) produced oil in the 2-7% BS&W range whereas the corresponding tests without applying an electrostatic field led to a BS&W greater than 25%. The achieved results strongly suggest that the VIEC technology can resolve the stable emulsion bands encountered in the Schiehallion train and add flexibility or increased production rate to the process. The results also suggest the importance of further studies on the destabilization performances achieved by electrostatic means.     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of polyurethane resins and its improvement on dimensional stability and finishing performances of medium‐ and small‐diameter softwoods

This study analyzed the effects of polyurethane (PU) resin treatments on surface homogeneity, dimensional stability, and finishing performances of medium‐ and small‐diameter softwoods produced in Taiwan. Two‐pack PU resins were prepared by combing short castor oil‐modified alkyd resin serving as a polyol with polymeric 4,4′‐diphenymethane diisocyanate (PMDI) serving as a hardener, by the molar ratio of NCO/OH+COOH of 1.2. Four types of short oil‐modified alkyd resins with different polyhydric alcohols (glycerin and pentaerythritol) and polybasic acids (phthalic anhydride and isophthalic acid) were synthesized. Three kinds of medium‐ and small‐diameter softwoods, including China fir, Taiwanina, and Japanese fir with a diameter of 10–15 cm were obtained from Hui‐Sun Forest Station, Taiwan. The wood coating of nitrocellulose (NC) lacquer including sanding sealer and top clear was used. Results show that the surface hardness, homogeneity, moisture excluding efficiency, and antiswelling efficiency of woods were enhanced by PU resin treatments. Among all the PU resins, the isophthalic acid and pentaerythritol‐containing PU resin (IPA‐P‐MDI) achieved the best improved efficiency on dimensional stability of woods. Results of two types of finishing procedure, i.e. NC lacquer sanding sealer plus top clear and top clear only, applied onto the PU‐treated woods revealed that the hardness, adhesion, and durability of NC lacquer films on the PU‐treated wood were superior to those of untreated one, especially for top clear finishing alone. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008