实用型5GHz带宽InGaAs／InP PIN光电探测器

设计并研制成功了实用型５ＧＨｚ带宽ＩｎＧａＡｓ／ＩｎＰ ＰＩＮ光电探测器，介绍了限制探测器响应速度的主要因素，微波封装的理论依据，以及所研制器件频率响应的测试结果。     

大爆炸宇宙学模型一些主要观测事实及其讨论

本文用近代物理学有关理论讨论了大爆炸宇宙学模型的一些主要观测事实，如哈勃定律，宇宙微波背景辐射、氦的丰度等问题，尝试对大爆炸宇宙学模型双观测事实到理论作一个初步地描述。     

微波高压提取快速测定饲料含氟量的探讨

采用微波高压制样技术,快速提取饲料中的氟元素,结合氟离子选择性电极标准添加和电位极差测试方法,能够快速、准确地测试饲料中的含氟量     

微波能在中药加工中的应用

阐述了微波能烘干、灭菌在中药加工中的实例和一系列优点。     

TiO_2对ZrO_2－NiCr金属陶瓷烧结特性和相稳定性的影响

本文研究了ＴｉＯ２掺入对ＣａＯ稳定ＺｒＯ２（简称ＣａＳＺ－ＮｉＣｒ）金属陶瓷烧结特性的影响，测定了ＣａＳＺ－ＮｉＣｒ－ＴｉＯ２金属陶瓷烧结样品的密度和显微硬度，结果表明，ＴｉＯ２的掺入能提高ＣａＳＺ－ＮＩＣｒ金属陶瓷的烧结密度和显微硬度，对ＣａＳＺ－ＮｉＣｒ金属陶瓷有助烧结作用．金相观察表明，ＴｉＯ３的掺入改变了ＮｉＣｒ相在金属陶瓷中的形貌，说明了ＮｉＣｒ与ＣａＳＺ的浸润性有一定的改善．ＸＲＤ和ＥＰＭＡ分析结果显示，ＴｉＯ２偏聚在ＮｉＣｒ金属相中，不影响ＣａＳＺ的稳定性．     

海表面盐度卫星微波遥感研究进展

海表面盐度SSS(Sea Surface Salinity)是研究大洋环流和海洋对全球气候影响的重要参量、是决定海水基本性质的重要因素之一。卫星微波遥感可以满足盐度研究过程中大范围、连续观测的需要,国际上统一的认识是选择频率为1.413 GHz的L波段作为盐度遥感的首选波段。目前,国外发展的海面盐度微波遥感反演算法主要有两种:基于海表发射率估算海表盐度的算法和基于贝叶斯定理提出的反演算法。影响盐度反演精度的因素主要有太空辐射、电离层法拉第旋转、大气、海面粗糙度等。其中,海面粗糙度对盐度反演影响很大,海面粗糙度处理模型可以分为3大类:理论算法(间接发射率模型、直接发射率模型)、经验算法、半经验半理论算法(Hollinger 半经验模型、WISE半经验模型、Gabarró模型)。SMOS卫星和Aquarius/SAC\|D卫星的成功发射,将海表面盐度遥感的反演精度控制在0.2 psu以内,通过改进反演算法,有望得到更高的反演精度。     

Mapping and Modelling Single Scan Track Formation in Direct Metal Selective Laser Melting

When a laser beam scans the surface of a metallic powder bed, the resulting track may be continuous with a crescent shape cross-section, continuous with an elliptical section, discontinuously irregularly broken, discontinuously balled or only partially melted. This paper reports experimental observations of what CO₂laser powers and scan speeds lead to what type of track, for M2 and H13 tools steels and 314S stainless steel powder beds. It also presents measurements of bed physical properties relevant to predicting the behaviour and the results of modelling that agree with the experiments. The results are placed in the broader context of selective laser melting build strategies     

Reactivity study and kinetic evaluation of CuO-based oxygen carriers modified by three different ores in chemical looping with oxygen uncoupling (CLOU) process

In the chemical looping with oxygen uncoupling (CLOU) process,CuO is a promising material due to the high oxygen carrier capacity and exothermic reaction in fuel reactor but limited by the low melting point.The combustion rate of carbon is faster than the decoupling rate of oxygen carrier (OC).Hence,high tem-perature tolerance and rapid oxygen release rate of CuO modified by three different ores were investi-gated in this study.The kinetics analysis of oxygen decoupling with Cu-based oxygen carriers was also evaluated.Results showed that CuO modified by chrysolite had faster oxygen release rate than that of CuO.Limestone showed obvious positive effect on the oxidization process.The selected OCs could keep stable in at least 20 cycles,for about 1200 min.Shrinking core model (SCM) fitted well for the decoupling process in the temperature range of 1123-1223 K.Reduction rate kinetic information may aid in the development of chemical looping with oxygen uncoupling (CLOU) technologies during reactor design and process modeling.Ternary doped copper oxide with chrysolite and limestone could improve the reactivity of CuO in decoupling and coupling process and also improve the high temperature tolerance.     

Characterization and wear behavior of modified silicon nitride

Silicon nitride-based materials are applied to many tribological components because of their superior thermal and mechanical properties and corrosion resistance. The purpose of this study is to investigate the wear performance of modified silicon nitride which contained 3 wt.% La₂O₃ and 3 wt.% Y₂O₃. The relationships between microstructure and mechanical properties have been also addressed. Vickers microhardness and toughness were measured, the later being determined by means of the direct crack measurement method (DCM). Scanning electron microscopy technique (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) was used for the morphological characterization of the samples as well as for the characterization of the wear scars. Wear properties were studied under a load of 10 N by using the ball-on-disk tribometer. AISI 52100 steel balls and balls of WC + 6% Co (6 mm diameter) were used as static counterparts, respectively. Steady state friction coefficients of 0.66 and 0.62 were measured for the tribological pairs WC + 6 % Co/Si₃N₄ and AISI 52100/Si₃N₄, respectively. The wear mechanism was determined in each case, and comparison between the wear performance of the traditional and modified silicon nitride is also presented.