氧化合成对羟基苯甲醛的研究

研究了在硫酸介质中用Mn3+氧化对甲苯酚合成对羟基苯甲醛适宜的工艺条件:反应温度50℃,反应时间60 m in,硫酸浓度7.0 mol/L,搅拌速度为600 r/m in。粗产品经多步过滤分离法提纯,其总产率可达64.63%。     

纳米Fe2O3的制备与气敏性质的研究

报道了纳米氧化铁的制备工艺，采用沉淀法、溶胶凝胶法制备了纳米α-Fe2O3、γ-Fe2O3粉体，用热重－差热分析（TG－DTA）、X射线衍射（XRD）、透射电镜（TEM）和二次粒度分布对粒子进行表征，并制作了气体敏感元件。讨论了纳米氧化铁的制备工艺对气敏性质的影响。     

水热法合成(Mn,Zn)Fe_2O_4磁性晶体粉末

采用水热加工技术研究（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４晶体粉末的合成条件，对水热体系的碱度、温度、时间进行了系统实验．结果表明在ｐＨ＝７～１２．５范围内可有效合成（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４．当温度在１９０～２２０℃时，完成合成所需的时间为１～２ｈ，提高碱度有利于合成反应．本文还初步探讨了（Ｍｎ，Ｚｎ）Ｆｅ２Ｏ４的合成机理，为扩大实验提供依据．     

掺纳米Al2O3的纳米ZrO2(4Y)固体电解质的电性能

以纳米ZrO2(4Y)粉和纳米Al2O3粉为原料, 单轴成型, 1 200, 1 300 ℃无压烧结. 对掺不同质量分数(0.0～5.0%)Al2O3的ZrO2(4Y)烧结体, 用XRD, SEM和TEM研究了相组成和微观结构. 在不同温度下(300～1 000 ℃)测试了交流阻抗谱, 发现掺很少量的纳米Al2O3可降低ZrO2(4Y)的晶粒电阻. 但随着Al2O3掺入量的增加, 晶界电阻增大, 晶粒电阻也有所回升. 晶粒和晶界电导活化能则随Al2O3掺入量的变化不大. 对1 200 ℃,2 h烧结样品, 在1 000 ℃时, 掺0.5% Al2O3的ZrO2(4Y)样品有最大电导率, 为3.8×10-2Ω-1·cm-1.     

锰掺杂对PNW-PMS-PZT压电陶瓷结构和性能的影响

采用传统陶瓷工艺制备了Pb(Ni1/2W1/2)O3-Pb(Mn1/3Sb2/3)O3-Pb(Ti，Zr)O3-xMnO2压电陶瓷，分析了经1150℃烧结2h制备的陶瓷样品的相结构组成。实验结果表明：所有陶瓷样品均为钙钛矿相，未发现其它晶相。随着锰掺杂量的增加，陶瓷晶粒逐渐长大。研究了不同剂量的锰掺杂对压电陶瓷介电和压电性能的影响。结果表明：随着锰掺杂量的增加，材料逐渐变“硬”，当MnO2掺杂量少于0．2％(按质量计，下同)时，相对介电常数εr、压电常数d33和机械品质因数Qm逐渐增加，介电损耗tanδ减小；当MnO2掺杂量多于0．2％时，εr、d33和Qm逐渐降低，tanδ增加。随着锰掺杂量的增加，机电耦合系数kp和Curie温度θc逐渐减小。MnO2掺杂量为0．2％的压电陶瓷适合制作大功率压电陶瓷变压器。其压电性能为：εr=2138，tanδ=0．0058，kp=0．613，Qm=1275，d33=380pC／N和θc=205℃。     

In situ synchrotron X-ray studies on copper-nickel 5 V Mn oxide spinel cathodes for Li-ion batteries

Partial substitution of Mn in lithium manganese oxide spinel materials by Cu and Ni greatly affects the electrochemistry and the cycle life characteristics of the cathode. Substitution with either metal or a combination of both metals in the spinel lattice structure reduces the 3.9-4.2 V potential plateaus associated with the conversion of Mn³⁺ to Mn⁴⁺. Higher potential plateau associated with oxidation of the substituted transition elements is also observed. These substituents also significantly alter the onset of Jahn-Teller distortions in the 3 V potential plateau. Synchrotron based in situ X-ray absorption (XAS) was used to determine the exact nature of the oxidation state changes in order to explain the overall observed capacities at different potential plateaus. The studies on LiCu_0.5Mn_1.5O₄ show single phase behavior in the 4-5 V potential region with a good cycle life. Lower cycle life characteristic observed in cycling LiNi_0.5Mn_1.5O₄ and LiNi_0.25Cu_0.25Mn_1.5O₄ versus Li metal are ascribed to coexistence of several phases in this potential region. However, LiCu_0.5Mn_1.5O₄ shows onset of Jahn-Teller distortions in the 3 V potential plateau, in contrast to LiNi_0.5Mn_1.5O₄ and LiNi_0.25Cu_0.25Mn_1.5O₄ cathode materials.     

Improvement of structural stability and electrochemical activity of a cathode material LiNi0.7Co0.3O2 by chlorine doping

In the process of Li⁺ intercalation-deintercalation, electron removal is accompanied simultaneously. Oxygen was found to compensate electron removal both in theoretical calculations and practical experiments. Chlorine addition to LiNi_0.7Co_0.3O₂ was expected to exchange electrons in that Cl⁻ was easier to lose electrons than O²⁻. LiNi_0.7Co_0.3O_2−xCl_x was identified as a pure hexagonal lattice of α-NaFeO₂ type by X-ray diffraction. X-ray photoelectron spectroscopy was used to analyze the influence of chlorine substitution on the oxidation state of transition-metal ions. Charge-discharge experiments and cyclic voltammetry confirmed that chlorine addition was an effective way to improve reversible capacity and structural stability in cycles.     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

锰离子掺杂对PZT-BCW压电陶瓷性能的影响

本文制备了锰离子掺杂的0．9SPZT-0．05Ba(Cu1／2W1／2)O3压电陶瓷，并对该压电陶瓷进行了XRD、SEM和微区成分分析。结果表明材料为钙钛矿结构，掺锰后材料的晶粒变大．但是该压电陶瓷的机械品质因数Qm大幅度提高，由60提高到490。     

Liquid-phase oxidation of toluene by molecular oxygen over copper manganese oxides

Copper manganese oxides (Cu–Mn oxides) were prepared by coprecipitation method and characterized by several techniques, such as X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and Temperature-programmed reduction (TPR). Catalytic activities of the Cu–Mn oxides were tested by the oxidation of toluene with molecular oxygen in liquid phase and solvent-free conditions. The molar ratio of Cu:Mn in catalyst was optimized to be 1:1 and thus the corresponding crystalline material was designated as Cu_1.5Mn_1.5O₄.