铝合金中锌、铁的快速测定--原子吸收分光光度法

样品以盐酸溶解，加入过氧化氢助溶，蒸至近干．加入1 1盐酸提取，移入100mL容量瓶中，分取部分溶液于50mL容量瓶中，调整盐酸酸度为5％，用水稀至刻度，摇匀后，以空气-乙炔火焰水相直接测定锌和铁。为了消除大量基体元素的影响，在标准系列中加入相当量的铝。此方法快捷、简便，亦可用于锰、镁、铜、铅、镍的测定。     

红外吸收法测硅铁中的超低硫

应用高频红外碳硫仪,建立了硅铁合金中超低硫测定方法,对选择适当的测定条件如助熔剂、分析时间等进行了探讨,最佳测定条件:最大工作电流为400～480 mA;载气纯度为99.99%;陶瓷坩埚需经1 100℃灼烧2 h后,可使空白降至最小;硫元素最短分析时间为40 s,比较水平为5.00.     

Dynamic buffering performance of the honeycomb paperboard filled with polyurethane

A new kind of composite buffering material was made by filling the voids of honeycomb paperboard with polyurethane. Drop tests were performed to evaluate the dynamic energy absorption capacity of the material. Based on the tests results, we analyzed the mechanical behaviors of the material under different conditions and obtained the inherent influencing laws of some factors on the material＇s dynamic buffering performance. It was shown that the dynamic buffering performance varied directly with impact velocity, and inversely with the void diameter, thickness and buffeting area of the composite material.     

铜离子印迹改性壳聚糖海绵的制备及应用研究

以醋酸铜为模板,甲醇、氯仿为溶剂,2-乙烯吡啶、丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备铜离子印迹聚合物;然后掺入到壳聚糖海绵的制备中,使壳聚糖海绵对铜离子的吸附率由27．1％提高到72．3％。制备的铜离子印迹改性壳聚糖海绵需要2d达到吸附平衡,吸附-解吸5次后,性能稳定。     

水耦合装药对露天深孔爆破效果影响的探讨

介绍了某露天山坡矿采用水耦合装药爆破技术,通过与常规爆破对比试验分析,提出利用水耦合爆破可以改善露天深孔爆破效果、提高原矿大块合格率和降低炸药单耗,达到安全增效、降耗的目的。     

含Cl^-溶液中SO4^2-对316不锈钢临界点蚀温度的影响

采用外加恒电位下腐蚀电流-温度扫描方法研究了在0．5％Cl^-溶液中，SO4^2-浓度对316不锈钢点腐蚀行为的影响．结果表明，随着SO4^2-浓度的增加，钝化电流增加，开路电位降低．当SO4^2-浓度低于0．42％时，316不锈钢的临界点蚀温度比不存在SO4^2-时的临界点蚀温度低；当SO4^2-浓度大于0．42％时，临界点蚀温度比不存在SO4^2-时的临界点蚀温度高．从离子竞争吸附的角度进行分析，对SO4^2-加速与抑制点蚀两种作用规律的形成原因进行了解释．     

HDTMA改性沸石吸附水中Cr（VI）研究

摘要：研究以阳离子表面活性剂HDTMA改性天然斜发沸石,制得HDTMA改性沸石,进而研究HDTMA改性沸石对废水中Cr（VI）的吸附特征。结果表明：HDTMAL改性沸石对cr（VI）吸附符合Langmuir等温式和拟二级动力学方程,饱和吸附量为10．99mg／g,吸附主要为化学吸附,但温度、pH值和干扰离-~HDTMA沸石吸附cr（VI）具有明显影响。     

Pb(Zr0.52Ti0.48)O3 nanotubes synthesis and infrared absorption properties

Herein a useful methodology to synthesize the lead zirconate titanate (PZT) nanotubes via a dip-coating deposition process with anodic aluminum oxide (AAO) template is proposed. The nano-porous AAO templates were produced using a controlled two-step electrochemical anodization technique. The PZT/AAO composite was formed using the dip-coating wetting technique. The prepared PZT precursor solution was driven into the nanopore channels of AAO template under the driving force of capillary action, subsequently the sintering process of the as-filled templates was carefully tuned to obtain Pb(Zr_0.52Ti_0.48)O₃ nanotubes of crystalline tetragonal phase with uniform pore size and ordered arrange. Fourier transform infrared spectroscopy (FTIR) results show that in the 1200–1900 cm⁻¹ band, the composite structure of PZT/AAO has obvious absorption peaks at 1471.56 cm⁻¹ and 1556.09 cm⁻¹, the absorption intensity of the composite structure is about six times of pure AAO template. The unusual optical properties found in PZT/AAO composite will stimulate further theoretical and experimental interests in ferroelectric nanostructures.     

Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

原子吸收光谱法快速测定松香皂中几种金属元素

提出了用原子吸收光谱法快速测定松香皂中几种金属元素的方法。考察了元素干扰情况及灰化温度。该方法快速、简便、准确 ,RSD为 0 .95 %～ 2 .2 1% ,回收率为 95 .6 %～ 10 8.7%。