Energy absorption in splitting square metal tubes

This paper presents an investigation into the energy absorbing behaviour of axially splitting square metal tubes. Tubes 50 mm square with a variable thickness were pushed slowly against rigid pyramid shaped dies, which had various semi-angles. By pre-cutting 5 mm long slits at the four corners, the tube splits along the corners and curls outward with a certain radius at a constant force. In this energy dissipating system, there are three components: tearing energy, plastic deformation energy and frictional energy. Theoretical analysis of the three energy components is presented. Curl radius is also studied in detail. Good agreement between experiments and theory is obtained. The results show that tubes which both split and curl may be used as efficient, long stroke energy absorbing devices.     

Non-contact methods of measuring moisture concentration in external layers of building partitions II—Monitoring of the water vapour condensation on porous surfaces

This paper present the results of the investigation into a potential application of laser radiation for the detection of phase transition processes occurring on the surface layers of porous materials. An attempt was made to discuss in the approximation equations, the relationships between coefficients of the reflected light, the temperature and humidity of the surrounding environment. Laser light reflected from the porous surface carries information about the roughness of the structure. The presence of water microdrop on the surface of the porous material, as a result of condensation and thus a phase transition, leads to the phase displacement of individual rays, which is represented by different images. Therefore, a comprehensive analysis of the reflected light parameters allows a dynamic study of the phase transition phenomena without mechanical intervention.     

用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

钛及钛合金中氧和氢的联合测定

叙述了用红外吸收法对钛及钛合金中氧和氢联合测定的方法，取得了测定的最佳条件。连续测定6次的相对标准偏差在10％以下，作加标回收试验的回收率为95．6％～103．9％。分析时间在3min以内，可应用于日常分析，结果满意。     

苯和甲苯差分吸收光谱方法的实验室测量研究

本文介绍了差分光学吸收光谱法(DOAS)测量大气污染气体浓度的基本原理。DOAS方法就是利用氙灯发出的紫外—可见光，经望远镜准直后再经过一段距离的传输，由望远镜来接收．在传输中，由于各种不同的分子在不同的波段对光有不同的吸收特征，使光谱具有了污染物的特征，再通过与光源发出的光进行比较，反演这些气体在大气中浓度．我们将DOAS方法应用在监测有机物上，在分析光谱的过程中，应用多项式拟合和最小二乘法，从而精确地从测量光谱中来反演出大气中污染气体的浓度．文中用DOAS方法测量了苯和甲苯的样品，并分析了结果，结果和理论吻合．可为环境中有机污染物监测提供可靠的方法。     

波长为515nm的氩离子激光器的频率稳定

用声光晶体对氩离子激光作频率调制,获得了碘分子的差拍饱和吸收信号。将得到的斜率极陡的—阶微商形式的饱和吸收信号作为鉴频曲线把氩离子频率激光稳定到~(127)I_2分子的p(13)43—0的a_3超精细分量上。通过与一稳定到相同精细分量的稳频氩离子激光拍频,给出激光频率稳定性优于±6.5×10~(-12),重复性优于±3.4×10~(-11)。     

Carnot comparison of multi-temperature level absorption heat cycles

Comparison of different absorption heat cycles is not always made on the correct manner. This also includes comparison of an ideal absorption cycle with a mechanical analogy. A new Carnot model operating with two heat engines and two mechanical heat pumps is defined to be the correct and logical way to describe the mechanical analogy for an absorption heat pump and an absorption heat transformer. General equations for the Carnot coefficient of performance, COP_r, are exemplified and simulated for an absorption heat pump and an absorption heat transformer, and an entropy flow fraction diagram is introduced. The important fact that the absorption heat cycles must operate under the same conditions when they are compared is discussed.     

The thermodynamic performance of a new solution cycle in double absorption heat transformer using water/lithium bromide as the working fluids

In this paper, a new solution cycle in the double absorption heat transformer is presented and the thermodynamic performance of this new cycle is simulated based on the thermodynamic properties of aqueous solution of lithium bromide. The results show that this new cycle is superior to the cycle being studied by some researchers. This new solution cycle has a wider range of operation in which the system maintains the high value of COP and has larger temperature lifts and operation stability. The relationship between the absorber and the absorbing evaporator is more independent and this makes the operation and control of the system more easier.     

丙烯腈吸收塔放空管道噪声控制

某石油化工总厂丙烯腈车间的吸收塔在放空负荷增大以后产生了较严重的噪声,对生产环境造成极大污染。为对丙烯腈吸收塔的放空管道实施噪声控制,改善工厂以及周边厂家的生产环境,进行了噪声控制方案设计及消声器设计。项目实施后,噪声绝对值降低了20分贝,噪声幅度降低达24％。     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008