填料并用对双组分室温硫化导热硅橡胶性能的影响

以α,ω-二羟基聚二甲基硅氧烷为基胶,Si3N4、AlN、Al2O3为导热填料,制备了填充型双组分室温硫化（RTV-2）导热硅橡胶.研究了填料Si3N4/Al2O3或AlN/Al2O3并用对RTV-2硅橡胶导热性能、工艺性能及力学性能的影响.结果表明,当填料的总体积分数为0.45时,对于Si3N4/Al2O3填充体系,随着体系中Al2O3体积分数的增加,RTV-2导热硅橡胶的热导率先升后降、拉伸强度先增后减,而扯断伸长率则呈逐渐升高的趋势,基料的粘度先减后增;当Al2O3的体积分数为0.14时,RTV-2导热硅橡胶的热导率最高、拉伸强度最大,基料的粘度最小,综合性能最佳.对于AlN/Al2O3填充体系,随着体系中Al2O3的体积分数的增加,RTV-2导热硅橡胶的热导率先升后降、拉伸强度及扯断伸长率先减后增,基料的粘度呈上升趋势;当Al2O3的体积分数为0.07时,RTV-2导热硅橡胶具有较好的导热性能和工艺性能,但力学性能偏低.     

3-氯-2-羟丙基三甲基氯化铵的制备

通过系统的实验研究,探索出3 氯 2 羟丙基三甲基氯化铵(CHPTMAC)的最佳生产工艺条件:n(环氧氯丙烷)∶n(三甲胺盐酸盐)=0 95∶1,反应起始pH=7 5～8 0,反应温度采用分段控制(10℃,35℃),使用合适的催化剂,反应收率可达96%以上。通过连续水汽精馏对产品进行纯化,纯化后的产品中w(CHPTMAC)=69%,w(环氧氯丙烷)≤0 0005%,w(二氯丙醇)≤0 0015%,产品性能良好,已投入生产。     

Peer-to-peer bichromatic reverse nearest neighbours in mobile ad-hoc networks

The increasing use of mobile communications has raised many issues of decision support and resource allocation. A crucial problem is how to solve queries of Reverse Nearest Neighbour (RNN). An RNN query returns all objects that consider the query object as their nearest neighbour. Existing methods mostly rely on a centralised base station. However, mobile P2P systems offer many benefits, including self-organisation, fault-tolerance and load-balancing. In this study, we propose and evaluate 3 distinct P2P algorithms focusing on bichromatic RNN queries, in which mobile query peers and static objects of interest are of two different categories, based on a time-out mechanism and a boundary polygon around the mobile query peers. The Brute-Force Search Algorithm provides a naive approach to exploit shared information among peers whereas two other Boundary Search Algorithms filter a number of peers involved in query processing. The algorithms are evaluated in the MiXiM simulation framework with both real and synthetic datasets. The results show the practical feasibility of the P2P approach for solving bichromatic RNN queries for mobile networks.     

Premodification of Pt/γAl2O3 with Cinchonidine for the Enantioselective Hydrogenation of Ethyl Pyruvate: Effect of Premodification Conditions on Reaction Rate and Enantioselection

The premodification of a 5 wt% Pt/-Al₂O₃ catalyst with cinchonidine (0.01 and 0.2 g g^-1 _catalyst) is described and discussed. Premodification is carried out by treating the catalyst with a solution of cinchonidine followed by solvent removal. Catalysts premodified in this way give the same ee and initial rate of reaction for the enantioselective hydrogenation of ethyl pyruvate as those using the standard in situ modification procedure. Investigations of different solvents for premodification and reaction (dichloromethane, ethanol) show that it is the solvent used for the reaction that controls the observed enantioselection. Premodified catalysts also display the initial transient behavior typically observed with in situ modified catalysts in which the ee increases with conversion in the early part of the reaction. Premodified catalysts show an enhanced rate of reaction when ethanol is used as the reaction solvent compared with in situ modified catalysts under the same conditions. Premodification using aerobic conditions gives the best results and premodified catalysts can be stored prior to use for up to a week without loss of catalytic performance.     

固体超强酸SO2-4/TiO2-SiO2催化合成马来酸二辛酯

用H2SO4浸渍钛硅复合氧化物，制得固体超强酸SO4^2-/TiO2-SiO2，考察了催化剂对马来酸酐与正辛醇的酯化反应的催化作用及其制备条件对催化剂活性的影响，并与硫酸，对甲苯磺酸的催化效果比较，结果表明，对于给定反应，当n(Ti):n(Si)为15：1，用浓度0．6mol/L的硫酸浸渍8h，在550℃下焙烧3h时制得的催化剂SO4^2-/TiO2-SiO2具有最高的催化活性，用以催化马来酸酐和正辛醇的酯化反应，可得无色透明的酯化产物，3h内酯化率达99．1％，较SO4^2-/TiO2催化剂的酯化率提高了约6％。     

2-苄基-4-氯苯酚的合成工艺

以非极性溶剂环己烷为介质,以无水氯化锌为催化剂,氯化苄与对氯苯酚在温和条件下合成2-苄基-4-氯苯酚.研究了溶剂、催化剂、反应温度等因素对反应的影响,并对产品进行了表征.结果表明,使用非极性的环己烷为溶剂,对氯苯酚浓度20%,对氯苯酚与氯化苄物质的量比5∶1,无水氯化锌为氯化苄质量的10%,温度30 ℃下反应6 h,产品收率达到78.7%.     

苯酐法合成蒽醌固体酸催化剂的进展

蒽醌(AQ)是重要的有机合成中间体,采用固体酸催化剂代替传统的液体酸催化剂可以使蒽醌合成过程绿色环保。笔者对固体酸催化剂硅-铝酸盐、粘土矿物、金属氧化物、分子筛、杂多酸催化剂、阳离子交换树脂应用于蒽醌合成的研究进展进行了综述,认为固体酸催化剂对蒽醌合成有很好的研究前景。     

纳米氧化锆/氧化锌光催化降解酸性红B的研究

以醋酸锌和氯氧化锆为原料，采用化学沉淀法制备了纳米氧化锆／氧化锌光催化剂。在中性条件下研究了催化剂煅烧温度，锆复合量，催化剂用量，染料初始质量浓度，过氧化氢质量浓度，各种阴、阳离子等条件对酸性红B脱色反应的影响。结果表明，该催化剂最佳制备条件为煅烧温度350℃，锆复合量2．5％（物质的量分数）。催化剂最佳用量0．9g／L。提高染料初始质量浓度会降低反应脱色率。适量过氧化氢可提高反应脱色率，当其质量浓度超过300mg／L会起负作用。NO3^-对反应影响不大；Fe^3＋和Ag^＋对反应起促进作用；SO4^2-，Cl^-，NO2^-等阴离子和Fe^2＋，Mn^2＋等阳离子对反应起抑制作用。     

紫外线吸收剂2，2，，4-三羟基二苯甲酮的合成

以水杨酸和间苯二酚为原料,无水氯化锌为催化剂,氯苯为溶剂,通过Friedel-Crafts反应合成了紫外线吸收剂2,2’,4-三羟基二苯甲酮。考察了反应温度、时间、原料配比对产品收率的影响。结果表明:在n(间苯二酚)∶n(水杨酸)=1∶1.2、反应温度120℃、反应时间3h的条件下,收率90%;产物经红外光谱、紫外光谱进行了表征,证明为二苯甲酮类物质,可用做紫外线吸收剂。