弱耦合状态下的量子逻辑门和远距离量子态的转移（英文）

依据弱耦合状态下的量子点-腔系统,提出了1个控制Z门和1个条件相位门.利用这个控制Z门并且测量光子和第1个电子的状态,可以将这个量子态转移到第2个电子上,从而实现2个远距离量子点之间的远程量子态转移.这些方案都是在弱耦合状态下实现的,不需要对腔有严格的要求.     

Interplay Between Wetting and Phase Behavior in Binary Polymer Films and Wedges: Monte Carlo Simulations and Mean Field Calculations

Confining a binary mixture, one can profoundly alter its miscibility behavior. The qualitative features of miscibility in confined geometry are ratheruniversal and shared by polymer mixtures as well as small molecules, but the unmixing transition in the bulk and the wetting transition are typically well separated in polymer blends. The interplay between wetting and miscibility of a symmetric polymer mixture via large-scale Monte Carlo simulations in the framework of the bond fluctuation model and via numerical self–consistent field calculations is studied. The film surfaces interact with the monomers via short ranged potentials, and the wetting transition of the semi–infinite system is of first order. It can be accurately located in the simulations by measuring the surface and interface tensions and using Young’s equation. If both surfaces in a film attract the same component, capillary condensation occurs and the critical point is close to the critical point of the bulk. If surfaces attract different components, an interface localization/delocalization occurs which gives rise to phase diagrams with two critical points in the vicinity of the pre-wetting critical point of the semi–infinite system. The crossover between these two types of phase diagrams as a function of the surface field asymmetry is studied. The dependence of the phase diagram on the film thickness Δ for antisymmetric surface fields is investigated. Upon decreasing the film thickness, the two critical points approach the symmetry axis of the phase diagram, and below a certain thickness Δ_tri, there remains only a single critical point at the symmetric composition. This corresponds to a second-order interface localization/delocalization transition even though the wetting transition is of first order. At a specific film thickness, Δ_tri, tricritical behavior is found. The behavior of antisymmetric films is compared with the phase behavior in an antisymmetric double wedge. While the former is the analog of the wetting transition of a planar surface, the latter is related to the filling behavior of a single wedge. Evidence for a second-order interface localization/delocalization transition in an antisymmetric double wedge is presented, and its unconventional critical behavior is related to the predictions of Parry et al. (Phys. Rev. Lett. 83:5535 (1999)) for wedge filling. The critical behavior differs from the Ising universality class and is characterized by strong anisotropic fluctuations.Invited paper presented at the Fifteenth Symposium on Thermophysical Properties, June 022–27, 2003, Boulder, Colorado, U.S.A.     

ITO粉的Rietveld全谱图拟合定量相分析

对ITO粉样品用Rietveld全谱图拟合法进行了定量相分析，该样品由立方晶型的In2O3和少量的四方晶系的SnO2所组成。In2O3和SnO2质量百分含量分别为94．23％和5．77％。结果表明，用Rietveld法进行了定量相分析是非常有效和准确的。     

Preparation of SnO2 whiskers via the decomposition of tin oxalate

A new method for preparing SnO₂ whiskers by the decomposition of SnC₂O₄ is suggested. A Whisker-like morphology of a SnC₂O₄ precipitate was attained via the gradual addition of an oxalic acid solution to a hot SnCl₂ aqueous solution (T > 50^∘C). In comparison, when the solution temperature was either lower than 50^∘C or when ethanol was used as the solvent, the SnC₂O₄ precipitate showed an angular and relatively isotropic morphology. The morphology of the SnC₂O₄ precipitate remained even after its thermal decomposition into SnO₂ at 400^∘C indicating that SnC₂O₄ precipitation is a key step in preparing the whiskers. The formation mechanism of SnO₂ whiskers was explained by the supersaturation during the precipitation of SnC₂O₄.     

UPS并机数字锁相误差分析

针对不间断电源(UPS)并联系统同步问题,进行锁相误差分析,并探讨了减少锁相误差的措施和方案。通过在两台30kVA样机上进行并联实验,验证了方案的正确性。     

Nanoluminograph — A New Generation of Measuring Instruments

A nanoluminescent device, or nanoluminograph, has been developed, created, and patented. By means of the device, unique information about the physicochemical properties of surface and near-surface layers of solids and ultrathin coatings of thickness less than 0.4 μm may be obtained. There is also the hope of decreasing the thickness of the subject layer with further development of the detecting component of the device. __________ Translated from Izmeritel'naya Tekhnika, No. 8, pp. 28–31, August, 2005.     

显微组织对ZIRLO锆合金耐腐蚀性的影响

将ZIRLO锆合金样品分别进行1000℃-0.5h／560℃-10h、1000℃-0.5h／冷轧／560℃-10h和750℃-0.5h、750℃-0.5h/560℃-10h、750℃-0.5h／冷轧／560℃-10h的不同处理。用透射电镜观察了它们的显微组织，将它们放入高压釜中，研究了在350℃，16.8MP,0.04M LiOH水溶液中的耐腐蚀性能，结果表明，在本文所有的变形及热处理条件下中，750℃-0.5/冷轧／560℃-10h处理后样品的耐腐蚀性能最好，其原因在于样品经过这样处理后，基体αZr中固溶的Nb含量较低，并获得了纳米尺寸分布的βNb(含Fe)第二相粒子，后者对改善耐腐蚀性能尤为重要。样品在最终560℃加热处理之前的冷轧变形，可以促进βZr分解时的形核，是获得纳米尺寸βNb的必要措施。     

双探头光学探针识别受热工况两相流流型的基本方法研究

由于流型识别手段受到限制．目前常用的流型图以及流型转变判据．都是在绝热工况下根据实验得到的；关于受热工况两相流流型还没有足够的实验数据。光学探针的运用为受热工况两相流流型的研究提供了有力的测量手段。本文对双探头光学探针4种流型识别的基本方法进行了研究，包括探针原始电平信号概率密度函数(PDF)分析识别流型、信号时序波形识别流型、空间波形识别流型以及汽泡尺寸PDF分析识别流型。研究结果表明，汽泡贯穿弦长PDF分析可得出满意的流型识别结果。     

含化学反应体系多相平衡计算方法的研究进展

首先给出了含化学反应体系多相平衡计算问题的数学方程，然后对国内外含化学反应体系多相平衡计算方法的现状和进展做了综述，包括经典的非化学计量系数法和化学计量系数法以及最近提出的稳定性分析法、全局最优法和遗传算法等，并具体介绍了化学计量系数法中两种常用算法-S-C算法和KZ算法以及遗传算法的算法原理和计算步骤。