提高16Mn连铸坯控轧合格率

１６Ｍｎ连涛坯进行控轧时，按铸坯碳当量的上限和下限，分别采用两种不同的控轧制度。在邯钢中板分厂试轧的结果，轧材合格率均达到９６％以上，投产后轧材合格率达到９８％以上。     

Electrochemical properties of ultra-long,aligned, carbon nanotube array electrode in organic electrolyte

The electrochemical properties of an electrochemical double-layer capacitor electrode based on an ultra-long (500 μm), aligned, carbon nanotube array (ACNTA) in Et₄NPF₆/propylene carbonate electrolyte are examined. The specific capacitance of the ACNTA electrode in an organic electrolyte is 24.5 F g⁻¹, which is larger than that obtained in an aqueous electrolyte. The results of ac impedance measurements show that the ACNTA electrode gives a high power density and an excellent rate capability in an organic electrolyte. It is shown that the ACNTA electrode has a lower equivalent series resistance and a better rate capability than activated carbon electrode. This is due to the fact that ACNTA possesses a larger pore size and a more a regular pore structure. Both these features are conformed by scanning electron microscopic and nitrogen gas adsorption studies.     

活性炭载体的超声波处理对Pt／C催化剂活性的影响分析

通过对活性炭载体进行不同条件的超声波处理获得了具有不同表面化学性质的载体，使用比表面积（BET）、酸碱滴定等技术手段对载体的物理化学性质进行了表征。将经过超声波处理的活性炭载体制备成Pt／C催化剂，并将催化剂直接用于催化反应，考察了活性炭载体的不同超声波处理条件对Pt／C催化剂性能的影响。实验发现，活性炭载体经过超声波处理后，表面灰分含量、pH值和中孔孔容有较大的变化；使用经过60min超声波处理后中孔孔容较大的活性炭作为载体制备的Pt／C催化剂，在催化加氢反应性能测试中显示了最高的催化活性。在此基础上，就活性炭载体的超声波处理对Pt／C催化剂活性的影响进行了讨论。     

95W-Ni-Fe 合金工艺缺陷的 SAM 和 XPS 分析

藉助扫描俄歇探针、Ｘ射线光电子谱等分析了９５Ｗ－Ｎｉ－Ｆｅ合金碳污染和氧化的本质。发现，碳污染试样中碳的化学状态主要为石墨，少量为铁或镍的有机化合物，这些物质的界面富集使材料脆化。钨合金氧化后，氧大量富集于钨／粘结相界面，使沿着该界面的断裂更容易发生。     

四氯化碳生产中氯化反应的回火原因分析与对策

探讨了四氯化碳生产中氯化反应的回火原因及避免回火的对策 ,解决了生产中的实际问题     

担载型含稀土三组份体系在二氧化碳甲烷化反应中的催化性能

用浸渍法制备了一系列氧化锆担载的含稀土Ⅷ族金属催化剂，对其在二氧化碳甲烷化过程中的催化活性作了研究，并用漫反射紫外可见光谱，ＦＴＩＲ等手段对催化剂作了表征。结果表明，含稀土新型催化剂具有催化活性高，目标产物选择性好等优点；稀土主要以氧化物形式存在于催化剂表面，参与对氢及表面含碳物种的吸附及活化；含稀土三组份催化剂的活性与所添加稀土三价离子的４ｆ电子数有关。     

Using the high pressure methane isotherm for determination of pore size distribution of carbon adsorbents

A method of determining pore size distribution, PSD, of carbon adsorbents based on the high pressure methane isotherm is presented. A generic software package, and an IBM compatible PC, have been used to search for a PSD in the form of a histogram. The method relies on a known local isotherm, in this case, assuming a simplified model of infinite slit shaped carbon pores.Three carbons, having very different pore structures: BPL, PX-21, and PVDC, were analyzed using the new method and the results compared with those obtained from subcritical Ar, and N₂ isotherms. The analysis from the high pressure methane isotherm gave results which are different than those from the low pressure low temperature isotherms but not significantly enough to be unrealistic.     

Alkylated ureas: mineralization and evaluation as N sources

An incubation experiment was conducted for 11 weeks to study the mineralization of ten alkylated ureas and urea in soil. Six of the alkylated ureas viz. methylurea(MU), 1,3-dimethylurea(1,3DMU), 1,1-dimethylurea(1,1DMU), ethylurea(EU), 1,3-diethylurea(1,3DEU) and butylurea(BU) and urea mineralized during the experiment. Urea mineralized immediately, while alkylated ureas mineralized after an incubation period ranging from less than a week to four weeks (delay period of mineralization). The delay period increased in the following sequence MU < 1,3DMU < EU < BU < 1,1DMU < 1,3DEU, but after the delay period was over the compounds mineralized almost as rapidly as urea. The delay period varied according to the number of carbon atoms in the alkyl group and their position with respect to each other on the molecule. It appeared to be specific for each compound and was apparently not influenced by the presence of urea or other alkylated ureas. This character can be used to develop mixture of various alkylated ureas to obtain N mineralization at the desired time. Rapid evolution of CO₂ and N₂O was observed during the mineralization of urea as well as alkylated ureas. Increase in soil pH was also observed during this period. The simultaneous ocurrence of these events suggested the formation of urea as an intermediate during the mieralization of alkylated ureas. None of the alkylated ureas showed adverse affect on emergence of wheat seedlings and except DEU and BU at high concentration no other alkylated urea showed any adverse effect on initial growth of wheat seedlings.     

碳含量对易切削非调质塑模钢组织及性能的影响

研究了碳含量与易切削非调质塑料模具钢性能间的关系。结果表明，随着碳含量的上升，钢的硬度随之而升高，韧性则先升后降，钢的切削性能渐趋恶化。     

真空阴极弧离子镀类金刚石碳（DLC）膜的碳弧稳定性研究

选用氩气、氩气加氢气、氩气加乙炔等气体作为介质，石墨作为靶材进行真空阴极弧离子镀来制备类金刚石碳膜。石墨电弧有其独特的电弧特性曲线，不同气体介质对碳弧特性的影响不同，磁场的大小对电弧的稳定性有很大作用，碳弧下基片偏流随电弧电压的增加而减小，试验得到表面光滑的类金刚石碳（DLC）膜，对膜的表面进行了SEM分析。