大型薄壁高温合金整体铸件的关键制造技术及其应用

讨论了大型薄壁高温合金整体铸件的关键技术及其应用现状。     

稀有金属伟晶岩过度冷却与侵位之关系——基于野外地质观察及年代学的思考

稀有金属伟晶岩的结晶过程是认识其成矿作用的重要方面。前人利用冷却模型所推测出的侵入变质围岩的伟晶岩冷却时间为几天至几千年,但对侵位于花岗岩中伟晶岩的结晶过程缺乏相关研究。基于此,对新疆大喀拉苏及镜儿泉地区稀有金属伟晶岩的野外地质观察及年代学研究显示,两处伟晶岩的侵位模式不同,侵位时花岗岩围岩的温度有别。大喀拉苏1号伟晶岩(年龄为(248.4±2.1)～(228.4±0.3)Ma)主要侵位于较冷花岗岩围岩(年龄为(261.4±2.1)Ma)的席理面,边缘可能出现过度冷却。最新铌钽铁矿U-Pb年代学显示,镜儿泉1号锂辉石伟晶岩形成时代为(250.8±1.0)Ma,熔体侵位于温度较高的花岗岩(年龄为(252.9±1.9)Ma)内部断层,其冷却结晶受花岗岩温度及区域地热梯度制约,冷却时间可能超过3 Ma。综上所述,过度冷却模型的适用性、铌钽铁矿U-Pb同位素体系的封闭温度都需要进一步研究,以解释同位素年龄与冷却模型所得结晶时间的显著差异。     

管无芯弯曲中塑性变形规律的研究

通过大量管材弯曲试验,分析了沿弯曲线的切向和管壁厚方向的应力应变状态,给出弯管内、外侧管壁厚变化量和切向应变的近似计算公式。在后续试验的基础上,逐步将修正公式适用于实际生产。同时,为管材弯曲成形机理研究作了相应的基础准备工作。     

Characterization of wet microalgal cells pretreated with steam for lipid extraction

Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.     

型材产生壁厚偏差的原因及解决方法

就型材生产过程中产生壁厚偏差的原因进行了分析，并就解决偏差的方法进行了探讨。     

Mo的替代对FeNbBCu软磁纳米晶合金磁谱的影响

本文研究了Fe82Nb7-xMoxB10Cu1(x=0,1,3,5）系列纲伙晶软磁合金中Mo的含量对磁导率谱（频率范围1kHz-1MHz)的影响，并用畴壁钉扎理论进行了解释，在磁谱中观测到随着Mo含量的增加，弛豫频率线性地上升，μ′随外加磁场幅度变化曲线表明其原因在于Mo的替代导致了钉扎场的增强。     

回转窑窑壁非稳态传热模型及窑皮厚度优化

烟气、料床、窑壁是回转窑传热过程的三要素,在确定这三要素之间传热量的基础上,建立了回转窑窑壁非稳态传热数学模型。对中铝河南分公司2号窑窑壁的非稳态传热过程进行了数值计算。结果表明:窑体旋转一周,烧成带窑壁内表面温度将在1 232~1 334℃变化,这易导致窑壁热疲劳破坏;窑皮越厚,窑壁的径向温度梯度越小,热应力越低;将烧成带窑皮厚度控制在252 mm,可使烧成带窑壁外表面温度维持在200℃。     

石油钻采阀门内壁热丝TIG堆焊

石油钻采专用阀门的使用有耐强腐蚀性要求，制造时需在内壁表层堆焊耐腐蚀材料。此类阀门具有质量大、形状特殊、焊接可达性差，焊接质量要求严格等特点；重点介绍了Fronius热丝TIG焊工艺和ETR全自动堆焊设备在阀门堆焊制造上的应用。     

高层住宅结构设计

主要介绍长沙梦泽园高层住宅从基础到上部楼层各部位的结构设计,以及在设计、施工过程中所考虑的一些问题及处理方法。     

Electrodiffusion diagnostics of the flow and mass transfer inside a network of crossing minichannels

The global mass transfer and the local flow structure inside a set of crossing minichannels were characterized using the electrodiffusion method. The individual square-cross channel sections (a = 1.5 mm in sides) intersect at right-angles in order to form the flow cell. An array of 39 circular platinum electrodes (0.25 mm in diameter) was flush-mounted into the wall of the flow cell to investigate the wall shear rate at different locations. This array of small sensors allowed characterization of longitudinal and lateral variations in wall shear rate across the flow cell, flow distribution at the inlet and outlet sections, transition between laminar and turbulent flow regimes, and flow behaviour at the channel crossings. The results of global wall mass transfer measurements demonstrated that, from a mass transfer point of view, the flow cell exhibits similar behaviour to a porous medium.