A scheme to randomly generate surface dust points for the 3D complex variable boundary element method (CVBEM)

A scheme to randomly generate dust points on the surface of a three-dimensional (3D) object is proposed. This scheme will potentially eliminate the bias of a density of points which are approximately equally spaced on the surface, as well as eliminate possible weighting requirements for areas of higher density. This method has the potential to reduce computational effort, as fewer points might be required to define the surface area. The global trial function vector can be assigned to these dust points and then entered into the complex variable boundary element method (CVBEM) commercial code. This scheme can be applied to each piece of a system that is comprised of a connected multiple geometry. A noticeable benefit of this approach is that the same problem can be studied several times, using a new random distribution of surface points each time. The smallest error can then be determined and that run selected. The Mathematica code used to generate the scheme is attached as an appendix.     

美国食品安全管理法规与举措

以美国国会研究服务部对第107届国会就食品安全方面的一份报告为基础,主要对美国的公共健康问题现状、美国食品安全的联邦规范框架组成、美国食品安全控制最新进展和国会对食品安全提出的新议题做了综述,对我国的食品安全控制和管理体系的建设发挥一点借鉴作用。     

Fast dynamic casting

We describe a scheme for implementing dynamic casts suitable for systems where the performance and predictability of performance is essential. A dynamic cast from a base class to a derived class in an object‐oriented language can be performed quickly by having the linker assign an integer type ID to each class. A simple integer arithmetic operation verifies whether the cast is legal at run time. The type ID scheme presented uses the modulo function to check that one class derives from another. A 64‐bit type ID is sufficient to handle class hierarchies of large size at least nine levels of derivation deep. We also discuss the pointer adjustments required for a C++ dynamic_cast. All examples will be drawn from the C++ language. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide (TiO2) as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry (CVAAS). Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg2 on the dithizone-modified nanoparticles was investigated in detail. It was found that excellent adsorption ratio for Hg2 could be obtained in the pH range of 7-8 with an oscillation time of 15 min, and a 5 mL of 3.5 mol·L-1 HCl solution could quantitatively elute Hg2 from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit (3σ) for Hg2 was calculated to be 5 ng·L-1. The proposed method was applied to the determination of Hg2 in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD (n = 5) of 2.9%-3.5%.     

三维地震勘探中强声波干扰的压制

在三维地震资料采集中产生的声波为非线性干扰波,能量强,频谱宽,利用常规的分频去噪和线性压噪方法难以将其去除,使后续的资料处理效果受到影响。基于声波具有非常稳定的传播速度这一特点,提出了一种利用非线性变换手段压制强声波干扰的方法。方法原理是,首先对三维地震资料中含声波到达时间的某段记录(时窗)进行转换,将非线性声波时距关系转换为速度趋于无穷、波数趋于零的一组噪声;然后应用f-k滤波对这组噪声进行压制;最后,再通过逆转换得到声波压制后的结果。该方法易于实现,并只对声波到达时间处的小范围数据进行处理,数据量小,计算效率高。对实际三维地震资料的处理结果表明,该方法压制强声波干扰的效果非常明显。     

Measurement of the Metal Surface Acidity/Electronegativity of Pt(110)

In previous work, it has been found that a hydrogen-covered Pt(110) surface is acidic, but quantification of the acidity has not yet been done. In this paper a spectroscopic method is developed to measure the acidity of a metal surface for the first time. The technique involves measuring the intensity of the N–H stretch from the C₅H₄XNH⁺ that forms when hydrogen coadsorbs with pyridine, 2-fluoropyridine and 3-fluoropyridine. The Bethe approximation is then used to estimate the metal surface acidity/electronegativity (MSAEL). The proton affinity/MSAEL of Pt(110) has been determined to be 907 ± 4 kJ/mol at high coverage. This is the first time the MSAEL has been measured on a metal surface. Implications for fuel cell catalysis are discussed.     

Turbo码中快速交织器的设计

分析了交织器在Ｔｕｒｂｏ码中的重要作用，以及目前交织器存在的缺陷，介绍了一种快速交织器的设计方法。该交织器易于实现，具有交织时延低的突出优点。计算机仿真结果表明，该快速交织器可以获得优异的性能。     

ATM-PON光网络终端管理控制协议

遵照 ITU- TG.983建议 ,建立 ONT管理和控制通道 ,实现 ONT与 OLT间的管理控制信息传送。并校正了多信息流传送时可能会产生的并发消息错误     

飞行时间二次离子质谱--强有力的表面、界面和薄膜分析手段

二次离子质谱（Secondary ion mass spectrometry，简称SIMS）是一种对表面灵敏的质谱技术，建立在表面各种类型带正、负电荷原子或分子发射的基础上。用飞行时间（Time of flight，简称TOF）仪器对这些二次离子进行质量分析，能确保并行质量登录、高质量范围、高流通率下的高分辨和精确质量测定这些优异性能。配合细聚焦扫描一次离子束，可在优于1nm的高深度分辨和优于50nm的横向分辨本领下，实现对表面优于单层ppm(百万分之一）量级的极高检测灵敏度。当今TOF－SIMS已发展为一种成熟且完善的表面分析技术。极高的灵敏度，再加上即使对大分子及不易挥发性分子都独具的敏感性，使它成为很多高技术领域不可缺少的分析手段，这些领域包括微电子学、化学和材料科学以至纳米技术和生命科学等。本文简述了TOF－SIMS的原理、仪器及其多方面的应用和展望。