State‐of‐the‐Art Neutral Tint Multichromophoric Polymers for High‐Contrast See‐Through Electrochromic Devices

Two new multichromophoric electrochromic polymers featuring a conjugated EDOT/ProDOT copolymer backbone (PXDOT) and a reversible Weitz‐type redox active small molecule electrochrome (WTE) tethered to the conjugated chain are reported here. The careful design of the WTEs provides a highly reversible redox behavior with a colorless red switching that complements the colorless blue switching of the conjugated backbone. Subtractive color mixing successfully provides high performing solution processable polymeric layers with colorless neutral tint switchable limiting states for application in see‐through electrochromic devices. Design, synthesis, comprehensive chemical and spectroelectrochemical characterization as well as the preparation of a proof‐of‐concept device are discussed.     

Enhanced power factor of poly (3,4-ethyldioxythiophene):poly (styrene sulfonate) (PEDOT:PSS)/RTCVD graphene hybrid films

The thermoelectric generator has been an attractive alternative power source to operate a wireless sensor node. Usually, inorganic compounds are most often used in thermoelectric devices, and hence, are extensively studied due to their superior thermoelectric performance. We have investigated a novel interfacial technique to fabricate a hybrid film of highly conductive PEDOT:PSS (poly 3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) and graphene. Organic materials PEDOT doped with PSS exhibits outstanding electrical properties due to its high conductivity, low bandgap, and energy migration. Furthermore, we utilized graphene fabricated by rapid thermal chemical vapor deposition (RTCVD) as a thermoelectric material. Our results show that the interfacial technique between substrate and hybrid film could be clearly improved due to the UV plasma treatment. The thermoelectric hybrid film of PEDOT:PSS and RTCVD graphene (P/RTG) exhibited an enhanced power factor of 56.28 μW m⁻¹ K⁻² with a Seebeck coefficient of 54.0 μV K⁻¹.     

Solution processable PEDOT:PSS based hybrid electrodes for organic field effect transistors

We report high performance solution processed conductive inks used as contact electrodes for printed organic field effect transistors (OFETs). Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) electrodes show highly improved very low sheet resistance of 65.8 ± 6.5 Ω/square (Ω/□) by addition of dimethyl sulfoxide (DMSO) and post treatment with methanol (MeOH) solvent. Sheet resistance was further improved to 33.8 ± 8.6 Ω/□ by blending silver nanowire (AgNW) with DMSO doped PEDOT:PSS. Printed OFETs with state of the art diketopyrrolopyrrole-thieno[3,2-b]thiophene (DPPT-TT) semiconducting polymer were demonstrated with various solution processable conductive inks, including bare, MeOH treated PEDOT:PSS, single wall carbon nanotubes, and hybrid PEDOT:PSS-AgNW, as the source and drain (S/D) electrode by spray printing using a metal shadow mask. The highest field effect mobility, 0.49 ± 0.03 cm² V⁻¹ s⁻¹ for DPPT-TT OFETs, was obtained using blended AgNW with DMSO doped PEDOT:PSS S/D electrode.     

A Self-Assembled Vertical-Gradient and Well-Dispersed MXene Structure for Flexible Large-Area Perovskite Modules

Advancing hole transport layers (HTL) to realize large-area, flexible, and high-performance perovskite solar cells (PSCs) is one of the most challenging issues for its commercialization. Here, a self-assembled gradient Ti₃C₂T_x MXene incorporated PEDOT:PSS HTL is demonstrated to achieve high-performance large-area PSCs by establishing half-caramelization-based glucose-induced MXene redistribution. Through this process, the Ti₃C₂T_x MXene nanosheets are spontaneously dispersed and redistributed at the top region of HTL to form the unique gradient distribution structure composed of MXene:Glucose:PEDOT:PSS (MG-PEDOT). These results show that the MG-PEDOT HTL not only offers favorable energy level alignment and efficient charge extraction, but also improves the film quality of perovskite layer featuring enlarged grain size, lower trap density, and longer carrier lifetime. Consequently, the power conversion efficiency (PCE) of the flexible device based on MG-PEDOT HTL is increased by 36% compared to that of pristine PEDOT:PSS HTL. Meanwhile, the flexible perovskite solar minimodule (15 cm² area) using MG-PEDOT HTL achieve a PCE of 17.06%. The encapsulated modules show remarkable long-term storage stability at 85 °C in ambient air (≈90% efficiency retention after 1200 h) and enhanced operational lifetime (≈90% efficiency retention after 200 h). This new approach shows a promising future of the self-assembled HTLs for developing optoelectronic devices.     

Electrical characteristics of ink-jet printed, all-polymer electrochemical transistors

We report on the fabrication and characterization of inkjet-printed, all-Organic ElectroChemical Transistors (OECTs) entirely realized by a conducting polymer, namely poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid) (PEDOT:PSS). The transistors utilized saline as the electrolyte and exhibited output characteristics typical for operation in depletion regime. The transfer characteristics could be tuned on the basis of device geometry, with the ratio between the area of the channel and the area of the gate electrode determining the transconductance. This work paves the road for the low-cost, print-on-demand fabrication of circuits for applications in bio-sensors and disposable electronics.     

Photolithographic patterning of PEDOT:PSS with a silver interlayer and its application in organic light emitting diodes

A patterning scheme for poly(3,4-ethylenedioxythio-phene):poly(styrenesulfonate) (PEDOT:PSS) is reported. With a silver interlayer, the conductive PEDOT:PSS film can be patterned down to micrometer scales by traditional photolithography, and this patterning scheme can be applied on large-area flexible substrates. Through systematical investigations, the patterning processes have no obvious influence on both the bulk and surface properties of PEDOT:PSS films. Efficient organic light emitting diodes (OLEDs) are realized based on this patterned PEDOT:PSS anode, and they show comparable performance to those devices with an indium tin oxide (ITO) anode. High-resolution OLED pixel arrays are also demonstrated. Our interlayer approach here has an advantage of patterning PEDOT:PSS with high resolution and large scale, and it is also compatible with traditional photolithographic processes which substantially save the capital cost. Results indicate that the photographically patterned conductive PEDOT:PSS film becomes a promising candidate for eletrical eletrode material in organic electronic applications.     

Electrically Activated Paper Actuators

This paper describes the design and fabrication of electrically controlled paper actuators that operate based on the dimensional changes that occur in paper when the moisture absorbed on the surface of the cellulose fibers changes. These actuators are called “Hygroexpansive Electrothermal Paper Actuators” (HEPAs). The actuators are made from paper, conducting polymer, and adhesive tape. They are lightweight, inexpensive, and can be fabricated using simple printing techniques. The central element of the HEPAs is a porous conducting path (used to provide electrothermal heating) that changes the moisture content of the paper and causes actuation. This conducting path is made by embedding a conducting polymer (PEDOT:PSS) within the paper, and thus making a paper/polymer composite that retains the porosity and hydrophilicity of paper. Different types of HEPAs (straight, precurved, and creased) achieved different types of motions (e.g., bending motion, accordion type motion). A theoretical model for their behavior is proposed. These actuators have been used for the manipulation of liquids and for the fabrication of an optical shutter.     

Stability of Thin Film Neuromodulation Electrodes under Accelerated Aging Conditions

Thin film electrodes are becoming increasingly common for interfacing with tissue. However, their long-term stability has yet to be proven in neuromodulation applications where electrical stimulation over months to years is desired. Here, the stability of pristine and PEDOT:PSS-coated Au, as well as pristine PEDOT:PSS microelectrodes are examined over a period of 3 months in an accelerated aging setup where they are exposed to current stimulation, hydrogen peroxide, mechanical agitation, and high temperature. Pristine PEDOT:PSS electrodes show the highest stability, while pristine Au electrodes show the lowest stability. Failure mode analysis reveals that delamination and Au corrosion are the key drivers of electrode degradation. The PEDOT:PSS coating slows down Au corrosion to a degree that depends on the overlap between the two films. The results demonstrate that pristine PEDOT:PSS electrodes represent a promising way forward toward thin film devices for long-term in vivo neuromodulation applications.     

In-situ modification of PEDOT:PSS work function using alkyl alcohols as secondary processing solvents and their impact on merocyanine based bulk heterojunction solar cells

The influence of a series of alkyl alcohols on the work function of PEDOT:PSS thin films is systematically investigated by Kelvin probe measurements. We show that the PEDOT:PSS work function can be increased stepwise from 5.2 eV for pristine PEDOT:PSS to 5.61 eV using either alcohols with different alkyl chain length or varying the amount of alcohol in mixtures with chlorobenzene. Moreover, we demonstrate the effect of work function modification on merocyanine based bulk heterojunction solar cells, resulting in improved values for the open-circuit voltage comparable to those obtained with high work function MoO₃. Thus, the processing method presented herein can potentially serve as a simple, alternative route to adjustable and high work function electrodes while maintaining processability from solution.