电解铝侧插自焙槽技术改造与环境保护

电解铝侧插自焙槽属于落后的生产工艺，由于其能耗高、物料消耗大、劳动强度大、环境污染严重，在国内电解铝中已开始进行大规模的淘汰改造。采用先进的预焙电解槽生产技术，降耗节能、改善生产劳动强度，环境污染得到有效治理，各项环境指标达标排放，经济技术指标提高，食业面貌发生了巨大大变化。     

Service life planning and performance requirements

Service life planning comprises a model for the determination of a reasonable expected service life for buildings and components, and it establishes a routine for the assessment of design alternatives. A design option is considered reasonable when it meets or exceeds performance requirements over time that have been drawn up specifically for the specific project. Due to this assessment reference, there is a very evident link to the concept of performance-based building. Any stakeholder involved in the value chain or in the design process of the building, as well as regulators and building users, can express performance requirements. Identified requirements, both in relevance and in quality, will vary with the stakeholder and his/her perspective of interest. As building sector manufacturers develop most products with reference to standards rather than with reference to specific requirements, there is no direct link from user requirements to the product design. Instead, the building designer has the responsibility to ensure performance requirements are met by the performance of products integrated into the design. As these design decisions also have to be made at the material and component level, a performance-based building would benefit from an established rationale that enables the communication of performance requirements across the relevant system levels in the relevant design processes. A path for the connection of the established concepts of service life planning and performance-based building is presented. The aim is to identify key elements that need to be developed for the successful linkage of performance-based building with service life planning.     

西门子S7-200可编程控制器在气化油点火技术中的应用

以西门子S7—200PLC为核心。利用火检探头。温度、压力等传感器，结合STEP 7 MicmwIN V3．1以及ProTool Pro CS工业组态软件完成了对点火过程的自动控制。实现了西门子S7—200PLC在大型发电厂410吨级蒸汽锅炉“气化油直接点燃煤粉技术”中的应用。提高了锅炉点火系统运行的自动化水平。     

浅谈下一代网络（NGN）

计算机网络的发展日新月异。下一代计算机网络（NGN）的探讨、研究已经成为当前的潮流。下一代网络是目前电信、互联网运营商和设备厂商都在讨论的热点技术，国内外许多网络运营商都在探讨，并正在或考虑建设试验网进行更深入的研究。本文介绍了NGN的定义、主要特点、分层结构和关键技术。     

我国和奥地利普兰西公司的钨、钼产品及其差距

对奥地利普兰西公司作了简要介绍，并将我国的钨、钼产品标准和普兰百公司的钨、钼产品、规格进行了对比。根据差距提出了我国钨、钼产品今后的发展方向。     

增力式夹具的设计与应用

增力式夹具结构紧凑，夹紧迅速可靠。它可以用较少的原动力获得较大的夹紧力，其增力倍数据实际须要同设计者调整。而且，若按机构自锁条件设计，该夹具夹紧之后，实现自锁。本文对该夹具结构做了介绍，并通过理论分析，指出增力系数和夹具自锁的设计条件。     

UniMAT PLC在塑料挤出机控制系统中的应用

针对塑料挤出机控制系统成本高、速度低、精度低的问题,提出采用UniMATPLC控制方式,实践证明效果良好。     

S7-200在KYS-1500/50型打捆机中的应用

采用西门子S7-200系列PLC设计电气控制系统,成功实现打捆机系统的自动控制,满足了生产的工艺要求。     

西门子PLC在合金钢棒材连轧机上的应用

介绍基于西门子S7-400PLC的控制系统,通过Ethernet、Profibus-DP、MPI网完成系统数据的采集、交换与监控,满足合金钢棒材轧制线高动态品质、高调速精度的要求。