一种控制盐层段井眼闭合率的钻井液密度新公式

针对钻井过程中钻遇的盐层段井眼蠕变缩径问题,利用弹塑性力学理论,蠕变本构方程采用Heard蠕变方程,在平面应变和均匀地应力假设下,推导出控制井眼收缩的钻井液密度新公式,该公式与前人推导的公式不同。通过理论分析,指出产生差异的根本原因在于蠕变应力差(极坐标下表示的径向应力与切向应力之差)公式的推导上,用有限元法计算结果对理论公式进行检验,证明是可行的。对文中的力学模型采用有限元法建模、求解,利用求解结果对各应力差公式进行验证,得出:根据文中公式计算结果与有限元法计算结果完全一致,而据前人公式计算结果偏离有限元计算值较大,从而间接证明了该钻井液密度新公式的推导更严密,更准确。     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

The relative effects of transection of the gustatory branches of the seventh and ninth cranial nerves on NaCl taste detection in rats.

Chorda tympani nerve (CT) transection in rats severely impairs NaCl taste detection. These rats can detect higher concentrations of NaCl, however, suggesting that remaining oral nerves maintain some salt sensibility. Rats were tested in a gustometer with a 2-response operant taste-detection task before and after sham surgery (n = 5), combined transection of the CT and the greater superficial petrosal nerves (GSP; 7x, n = 6), or transection of the glossopharyngeal nerve (GL; 9x, n = 4). Thresholds did not significantly change after sham surgery. Although the GL responds to NaCl and innervates nearly 60% of total taste buds, 9x surgery had no effect. However, 7x surgery increased NaCl detection threshold by ～2.5 log?? units, greater than that reported for CT transection alone. These results suggest that the GSP contributes to NaCl sensitivity in rats and also demonstrate that the GL and perhaps the superior laryngeal and lingual nerve proper can maintain some NaCl detectability at high concentrations. These findings confirm the primacy of the 7th nerve relative to the 9th nerve in sensibility of NaCl in the rat model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antimicrobial finishing of regular and modified polyethylene terephthalate fabrics

An effective two-stage method has been developed for imparting antimicrobial properties to regular polyethylene terephthalate (R-PET), polyethylene glycol modified polyethylene terephthalate (PEG-M-PET), R-PET/Cotton blend (R-PET/C) and PEG-M-PET/Cotton blend (PEG-M-PET/C) fabrics. The method consists of partial hydrolysis of the fabrics to create carboxylic groups in PET macromolecules followed by subsequent reaction with dimethylalkylbenzyl ammonium chloride (DMABAC) under alkaline conditions. The reaction conditions such as pH, reaction temperature and time, carboxylic content, and DMABAC concentration were studied. Characterization of the finished fabrics was carried out through scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR). All the modified PET fabrics showed excellent antibacterial activity towards Gram-positive (Bacillus mycoides), Gram-negative (Escherichia coli), and nonfilamentous fungus (Candida albicans). The achieved antimicrobial functions on the PET fabrics are durable in repeated laundering processes. Even after laundering 10 times the fabrics could still provide more than 85% of its antimicrobial activity against B. mycoides, E. coli, and C. albicans. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanistic investigation into the electrolytic formation of iron from iron(III) oxide in molten sodium hydroxide

Iron(III) oxide tablets were electrolytically reduced to iron in molten sodium hydroxide at 530 °C and recovered to produce iron with 2 wt.% oxygen suitable for re-melting. The cell was operated at 1.7 V and an inert nickel anode was used. The thermodynamics and mechanism of the process was also investigated. By controlling the activity of sodium oxide in the melt, the cell could be operated below the decomposition voltage of the electrolyte with the net sequence of events being the ionization of oxygen, its subsequent transport to the anode and discharge leaving behind iron at the cathode. A reduction time of 1 h was achieved for a 1 g oxide tablet (close to the theoretical reduction time predicted by Faraday’s laws) at a current density of 520 mA cm⁻² with iron phase yields of ∼90 wt.%. The energy consumption was 2.8 kWh kg⁻¹.     

��Ѩ���´����⽨�⼼��

我国的西气东输工程从新疆塔里木油田到上海，管线长度达4000公里，为确保对长江三角洲地区安全稳定的供气，就必须在长江三角洲地区建设地下储气库，从而保证在管线故障期间应急供气，同时利用地下储气库调节冬季和夏季用气量的差异，保证长输管线的高效、平稳运行。在长江三角洲地区经地库址选择，目前准备将常州盆地的金坛盐矿用以建设地下储气库。盐穴地下储气库主要选择在盐层或盐兵上，利用水溶方式形成地下溶腔进行储气，选择合适的建库地址要结合地质、水、工程等诸多因素，造腔过程中需要采取一系列控制技术，在造腔过程中还要及时采取声纳测井技术进行跟踪监测，造腔过程的检测及腔体完成后的密封安全性检测是气库能否投入运行的关键。     

Preparation of the TiB2 coatings by electroplating in molten salts

The improvement of titanium diboride (TiB₂) coatings over the molybdenum substrate was investigated by comparing the electrochemical techniques of continuous current plating (CCP) and periodically interrupted current (PIC). The solvent used was a eutectic Flinak mixture (LiF-NaF-KF, 46.5:11.5:42 molar ratio) with solutes K₂TiF₆ and KBF₄ with the electrochemically-active components in the molar ratio of one to five. The coatings produced by PIC show improvements in morphology and microstructure for the suitable conditions: i = 0.5 A/cm², frequency = 100 Hz, the time ratio t_c/t_off (current on/current off) = 4/1. X-ray diffraction (XRD) analyses indicated that the coatings are composed of the relatively pure TiB₂ and the preferred orientation is [001] + [110], which is in accordance with the prediction of the two-dimensional crystal nuclei theory.     

Charge density dependence of elastic modulus of strong polyelectrolyte hydrogels

The mechanical behavior of a series of strong polyelectrolyte hydrogels based on acrylamide and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) was investigated. The hydrogels were prepared at a fixed crosslinker ratio and monomer concentration, but at various charge densities, i.e. AMPS contents between 0 and 100 mol%. The elastic modulus of the hydrogels after their preparation first increases with increasing charge density but then decreases continuously. Investigation of the swollen state properties of the hydrogels shows existence of a large number of ionic groups inside the gel that are ineffective in gel swelling. The results indicate two opposite effects of charged groups on the elastic modulus of the hydrogels: formation of multiplets acting as additional crosslinks in the gel increases the elastic modulus of ionic hydrogels, whereas the effect of the electrostatic interaction of charged groups on elastic free energy decreases the modulus.     

粉状阳离子聚丙烯酰胺的研制

用聚丙烯酰胺胶体,在≥20％浓度的硫酸盐溶液中,进行Mannich反应,经真空干燥后,制取水溶性阳离子型高分子。初步探讨了盐浓度、温度、时间、配比对产物的阳离子度、溶解性的影响。     

Photoinitiated cationic polymerization using a novel phenacyl anilinium salt

A novel phenacyl anilinium salt, N-phenacyl, N,N-dimethylanilinium hexafluoroantimonate, (PDA), has been synthesized and used as photoinitiator for cationic polymerization of cyclohexene oxide (CHO), butyl vinyl ether (BVE) and N-vinyl carbazol (NVC). Plausible mechanism of the photoinitiation involves the decay of the excited PDA with both heterolytic and homolytic cleavages of carbon-nitrogen bond. Thus, phenacylium cations formed directly or subsequent intermolecular electron transfer, respectively, initiate the polymerization.