The introduction of metallic fillers to polymers via the photopolymerization approach can endow the composite materials with some unique properties, but the relevant research is still scarce due to the issue of light penetration and inner filter effect. Herein, for the first time the fabrication of photocomposites based on fine iron powder (i.e., a typical kind of metallic filler) is reported in this work. The free radical polymerization of two different acrylate monomers, poly(ethylene glycol) diacrylate and trimethylolpropane triacrylate, is performed in the presence of iron filler under mild conditions (i.e., light emitting diode (LED)@405 nm irradiation at room temperature under air). And the real-time Fourier transform infrared spectroscopy reveals remarkable photopolymerization kinetics of acrylates with high final conversions and fast polymerization rates despite the increasing contents of iron filler in the composites. Interestingly, the 3D printing technique is applied to the iron filler-based composites to produce tridimensional patterns with excellent spatial resolution. This work not only paves the way for the investigation of photocomposites based on metallic fillers through photochemical methods, but also broadens the potential application prospects. 相似文献
The design and application of bioderived flame retardants have been widely conducted to meet the concept of green and sustainable development. Here, self-assembly technique is used to prepare core–shell bioderived additives by using β-FeOOH as the core and polydopamine (PDA)/tannic acid (TA) bilayer as the shell, following adsorption of nickel ions to enhance the thermal stability, flame retardancy, and mechanical properties of epoxy resin (EP). The molecular structure of biobased resources is rich in hydroxyl groups and carbon content, which can be dehydrated and carbonized during combustion and promote the formation of robust protective char layer. With the addition of 5 wt% β-FeOOH@PTNi, the EP composites can pass V-0 rating in the UL-94 test. The peak heat release rate and total heat release decrease by 28.4% and 17.4% compared with pure EP. The bioderived nanorods can capture the oxygen free radicals, contributing to flame retarding in gaseous phase. Thus, the release of high-toxic CO and flammable gaseous is significantly suppressed. Besides, the storage modulus of EP composites increases by 16.0% with the addition of 5% β-FeOOH@PTNi compared with pure EP. This work provides a sustainable methodology for the design of bioderived flame retardants for EP. 相似文献
There is a growing demand to develop epoxy resins (EP) with smoke suppression as well as satisfactory flame retardancy. Herein, bio-based cobalt alginate is successfully fabricated and incorporated into EP to prepare EP/Cobalt Alginate composites with better fire safety performance. The addition of cobalt alginate reduces the thermal-decomposition rate, temperature at maximum weight-loss rate of EP, whereas obviously improves the thermal stabilities at a higher temperature range. Furthermore, the addition of cobalt alginate substantially reduces the fire hazard of EP, resulting in 56.2% reduction in peak heat release rate, as well as 17.8% and 56.3% reduction in total smoke production and peak smoke production rate, respectively, compared with EP matrix. Moreover, the presence of cobalt alginate increases smoke-suppressant properties, according to the smoke density test. Additionally, the incorporation of cobalt alginate has no obviously destructive effect on the mechanical properties of EP, while EP/Cobalt Alginate-3 exhibits a 27.0% improvement in impact strength. In prospective, this study may provide a significant method for producing eco-friendly flame retardant EP. 相似文献
Summary Over the past few years, the challenges of globalisation, consolidation and economical point of view have meant that manufacturers
of epoxy formulations have to constantly improve their capability to meet the needs of customers. An active area for advancement
is that of epoxy and polyamide resin with castor oil. Generally, people working in the coating industries are familiar with
castor oil, but this paper provides information on the new use of castor oil in epoxy and polyamide resin. This novel product
(castor oil-modified epoxy resin/castor oil-modified polyamide) provides a previously unattainable combination and improved
flexibility and toughness to a variety of ambient cure applications. This communication will review the performance of these
castor oil-modified epoxy and polyamide resin surface coatings and adhesives. Based on the results of this study, these systems
offer some advantages without much affecting the traditional properties of epoxy and polyamide resin in a variety of applications. 相似文献
Summary: A semi‐batch process using nitroxide mediated polymerization, was explored for the design of low molecular weight solvent‐borne coatings, typical of those used in the automotive industry. While living radical polymerization (LRP) offers many advantages in the control of polymer chain microstructure that may confer important physical and chemical property benefits to coatings, adapting LRP to a semi‐batch process poses significant challenges in the design and operation of the process. Using styrene monomer, various two‐component initiating systems (free radical initiator, 4‐hydroxy‐TEMPO) were studied to understand the effects of different initiators on the course of polymerization. In addition, an alkoxyamine was synthesized and used as the initiating source. The initiators Luperox 7M75 and Luperox 231 give higher polymerization rates and reasonable control over polymerization, while benzoyl peroxide (BPO), Vazo 67, and the alkoxyamine are less effective. The number of polymer chains in the final product is always less than the theoretical value, reflecting poor initiation efficiency, probably resulting from undesirable termination reactions that become important due to the nature of the semi‐batch process. Adding camphorsulfonic acid (CSA) or charging initiator concurrently with monomer during semi‐batch feed, can increase the polymerization rate while maintaining the living character of the polymerization. The copolymerization of styrene and butyl acrylate is also shown to exhibit living character.
Schematic representation of the exchange reaction to produce N‐TEMPO capped polymer chains. 相似文献