Coupled Efficient Zigzag Finite Element Analysis of Piezoelectric Hybrid Beams under Thermal Loads

A new one-dimensional beam finite element is developed for hybrid piezoelectric beams under thermal load, using a coupled efficient layerwise (zigzag) theory developed recently by the authors. The theory accounts for the layerwise variations of the axial and the transverse displacements while keeping the number of displacement variables independent of the number layers. The beam element has two nodes with four mechanical and a variable number of electric potential degrees of freedom at each node. In the thickness direction, the thermal and the electric fields are approximated as piecewise linear across an arbitrary number of sublayers in a layer. Cubic Hermite interpolation is used for the deflection and electric potentials at the sublayers and linear interpolation is used for the axial displacement and the shear rotation. The thermal field is computed using a consistent six-noded thermal finite element with a quadratic interpolation along longitudinal direction and a linear interpolation along thickness direction. The formulation is validated by comparing the results with the Navier-type solution of the zigzag theory for simply-supported hybrid beams. The element is free from shear locking. The accuracy of the zigzag theory is established by comparing the results of hybrid composite and sandwich beams with the two-dimensional finite element results using ABAQUS for cantilever and clamped-clamped end conditions under different thermal loads. The control of thermal deflection by the application of actuation potential is illustrated. The effects of electric boundary conditions and the pyroelectric effect on the response are discussed.     

A novel self-sensing synchronized switch harvesting on inductor北大核心CSCD

It has been proved that by applying the SSHI (Synchronized Switch Harvesting on Inductor) can greatly improve the piezoelectric vibration energy harvesting efficiency. However, additional sensor and controller is needed to control the switch in the SSHI circuit. To reduce the dependence on external equipments, a new circuit called SS-SSHI (Self-Sensing Synchronized Switch Harvesting on Inductor) is proposed. It can achieve the switch-on-off of SSHI automatically through analog circuit without any external testing and control equipment. This paper elaborates the principles of SS-SSHI, analysis the work status and output power of SS-SSHI. Both theoretical and experimental results show that the harvested power can be significantly increased with SS-SSHI circuit, and the maximum poweroutput increased 99.23% compared to the SHE (Standard Energy Harvesting) circuit. ©, 2014, The Editorial Office of Chinese Journal of Sensors and Actuators. All right reserved.     

Dielectric and piezoelectric properties of Y2O3 doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free piezoelectric ceramics

Y₂O₃ doped lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (0-0.7 wt%) were synthesized by the conventional solid state reaction method, and the effect of Y₂O₃ addition on the structure and electrical properties was investigated. X-ray diffraction shows that Y₂O₃ diffuses into the lattice of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ to form a solid solution with a pure perovskite structure. The temperature dependence of dielectric constant of Y₂O₃ doped samples under various frequencies indicates obvious relaxor characteristics different from typical relaxor ferroelectric and the mechanism of the relaxor behavior was discussed. The optimum piezoelectric properties of piezoelectric constant d₃₃ = 137 pC/N and the electromechanical coupling factor k_p = 0.30 are obtained at 0.5% and 0.1% Y₂O₃ addition, respectively.     

Axisymmetric response of circular plates with piezoelectric layers: an exact solution

Electromechanical responses of symmetric circular laminates consisting of piezoelectric layers are studied, and the influence of surface and interlayer electrodes are involved. The laminates are traction-free on the top and bottom surfaces, but may be subjected to external forces at the lateral edge and to voltages applied across certain layers. Under axisymmetric deformation conditions, an approximate model which employs Kirchhoff hypothesis and incorporates the charge equation of electrostatic is established. Then, a closed-form three-dimensional solution of the laminates is generated in a very straightforward manner by the solution of the approximate model. The three-dimensional solution fulfills all field equations and interface or surface conditions as well as the specified electric edge boundary conditions; the only restriction is that the mechanical edge boundary conditions are satisfied in an average manner, rather than point by point. Thus, according to Saint-Venant's principle the proposed solution is exact in the interior region of the laminates.     

Structure, microstructure and electrical properties of (1 − x − y)Bi0.5Na0.5TiO3–xBi0.5K0.5TiO3–yBi0.5Li0.5TiO3 lead-free piezoelectric ceramics

The ternary system (1 − x − y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃–yBi_0.5Li_0.5TiO₃ (abbreviated to BNKLT-x/y) was synthesized by conventional oxide-mixed method. The phase structure, microstructure, and dielectric, ferroelectric and piezoelectric properties of the ceramics were investigated. The X-ray diffraction patterns showed that pure perovskite phase with rhombohedral structure can be obtained in all the ceramics. The grain size varied with x and y. The temperature dependence of dielectric constant and dielectric loss revealed there were two phase transitions which were from ferroelectric (tetragonal) to anti-ferroelectric (rhombohedral) and anti-ferroelectric to paraelectric (cubic). Either increasing x or y content can make T_m (the temperature at which dielectric constant _r reaches the maximum) increase. With the addition of Bi_0.5K_0.5TiO₃, the remanent polarization P_r increased but the coercive field E_c decreased. With the addition of Bi_0.5Li_0.5TiO₃, P_r increased obviously and E_c increased slightly. Due to the stronger ferroelectricity by modifying Bi_0.5K_0.5TiO₃ and Bi_0.5Li_0.5TiO₃, the piezoelectric properties were enhanced at x = 0.22 and y = 0.10, which were as follows: P_r = 31.92 μC/cm², E_c = 32.40 kV/cm, _r = 1118, tan δ = 0.041, d₃₃ = 203 pC/N and K_p = 0.31. The results show that the BNKLT-x/y ceramics are promising candidates for the lead-free materials.     

改进压电传感器频率响应特性的措施

压电传感器的高频响应特性很好,但其低频响应特性较差,本文分析了压电传感器的高频响应特性,讨论了采用电压放大器和电荷放大器的低频响应特性,并提出了改进低频响应特性的方法。     

基于模式识别的压电精密驱动与控制系统

提出了基于图像识别技术的精密驱动与控制系统,以及将驱动系统分为步进电机丝杠的宏驱动系统和压电驱动器的精密驱动系统,并将两者有机地结合成完整宏/微的驱动系统。并且提出了基于计算机视觉技术与串口通信技术相结合的控制系统。这个精密驱动与控制系统的微操作平台连接上不同的机械执行机构就可以用于不同的精密加工和制造系统中。     

Comparison of sintering behavior and piezoelectric properties of (K,Na)NbO3-based ceramics sintered in conventional and microwave furnace

In this study (1 − x) K_0.48Na_0.48Li_0.04Nb_0.96Ta_0.04O₃ − xSrTiO₃ (0.0 ≤ x ≤ 0.10) ceramics were fabricated by sintering in microwave furnace for first time as well as in conventional furnace (either via single step or two-step procedures). Sintering behavior and piezoelectric properties of sintered samples were studied and compared. It was found that two-step sintering decreases sintering temperature effectively and enhances densification compared to single step sintering. Microstructure analysis revealed that, two-step sintering suppresses grain growth and promotes densification. On the other hand, microwave sintering enhanced densification more effectively and reduced sintering time and temperature. The maximum piezoelectric constants of ceramics were measured for those sintered in microwave furnace. Piezoelectric constant of the sample containing 1 mol% SrTiO₃ which was sintered in microwave furnace was measured 310 pC N⁻¹ while by sintering in conventional furnace via single and two-step sintering it was obtained 208 and 278 pC N⁻¹, respectively.     

Piezoelectric properties of Bi4Ti3O12 thin films annealed in different atmospheres

Bismuth titanate (Bi₄Ti₃O₁₂—BIT) films were evaluated for use as lead-free piezoelectric thin-films in micro-electromechanical systems. The films were grown by the polymeric precursor method on Pt/Ti/SiO₂/Si (1 0 0) (Pt) bottom electrodes at 700 °C for 2 h in static air and oxygen atmospheres. The domain structure was investigated by piezoresponse force microscopy (PFM). Annealing in static air leads to better ferroelectric properties, higher remanent polarization, lower drive voltages and higher piezoelectric coefficient. On the other hand, oxygen atmosphere favors the imprint phenomenon and reduces the piezoelectric coefficient dramatically. Impedance data, represented by means of Nyquist diagrams, show a dramatic increase in the resistivity for the films annealed in static air atmopshere.     

Influence of sintering temperature on piezoelectric properties of (K0.5Na0.5)NbO3-LiNbO3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ have been synthesized by traditional ceramics process without cold-isostatic pressing. The effect of the content of LiNbO₃ and the sintering temperature on the phase structure, the microstructure and piezoelectric properties of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics were investigated. The result shows that the phase structure transforms from the orthorhombic phase to tetragonal phase with the increase of the content of LiNbO₃, and the orthorhombic and tetragonal phase co-exist in (K_0.5Na_0.5)NbO₃-LiNbO₃ ceramics when the content of LiNbO₃ is about 0.06 mol. The sintering temperature of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ decreases with the increase of the content of LiNbO₃. The optimum composition for (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics is 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃. The optimum sintering temperature of 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics is 1080 °C. Piezoelectric properties of 0.94 (K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics under the optimum sintering temperature are piezoelectric constant d₃₃ of 215 pC/N, planar electromechanical coupling factor k_p of 0.41, thickness electromechanical coupling factor k_t of 0.48, the mechanical quality factor Q_m of 80, the dielectric constant of 530 and the Curie temperature T_c = 450 °C, respectively. The results indicate that 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ piezoelectric ceramics is a promising candidate for lead-free piezoelectric ceramics.