Sodium silicate as a coke inhibitor during naphtha pyrolysis

Rates of coke formation during steam pyrolysis of naphtha have been investigated in a jet-stirred reactor both for sodium silicate coated and uncoated Inconel 600 surfaces in the temperature range of 1078–1108 K. Coke formation rates were significantly reduced on sodium silicate coated plates due to the passivation of the metal surface. However, the coking rates gradually increased with successive decokings of the coated surface.     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

羊皮服装革的压缩性能及其与丰满性的关系的研究

本文研究了羊皮服装革的压缩性能。对压缩系数（Ｋｃ）与羊皮服装革手感丰满性的关系进行了讨论。结果表明：压缩系数Ｋｃ反映出革的手感丰满程度。     

雁翎油田注氮气提高采收率工艺技术

在现有的提高采收率方法中,注气驱是应用较广、效果较好的方法,特别是注氮气驱由于其气源广泛、价廉经济、无腐蚀性,以及要求的油藏地质结构特征和原油的物理性质等因素的变化范围广泛等特产,这种提高采收率的方法应用的最为普及,代表了目前提高采收率的发展方向。结合雁翎油田实例,简要介绍了注氮气提高采收率的机理、注气井组建设、制氮工艺及注气后的采油完井方式、方法。     

一种派生式与创成式相结合的CAPP系统

本文结合为某机械厂开发的实用计算机辅助工艺设计系统(JJCAPP),论述了一种兼有派生式和创成式特点的综合式工艺自动设计方法.     

特超稠油污水回掺降粘集输工艺

通过对河南古城油田BQ10区特超稠油乳状液的室内试验分析,指出该种乳状液的实际相突变点为68%左右,当相浓度Φ≥68%时,以W/O型为主的乳状液突变为以O/W型为主的乳状液.乳状液变型后,原油与管道内壁之间的摩擦以及原油之间的摩擦转变为水与管道内壁及水与水之间的摩擦,从而大幅度降低其粘度和摩阻损失;通过对古城BQ10区特超稠油区块单元内部污水回掺降粘集输的现场试验,证明与室内试验分析得出的结论相符合,说明区块单元污水回掺不同于常规的掺热水,也不同于掺联合站处理过的净化污水,它优于单井掺稀油.最后指出该工艺可有效地降低井站回压,方便生产管理,降低开采成本,提高采油效率和经济效益,具有低耗节能的优点.     

塑料合金用反应型相容剂

反应型相容剂含有反应基团,可与含相应基团的聚合物起化学反应,因而在混炼过程中增容。本文系统地介绍各种反应型相容剂的设计、合成、品种和应用。     

瀑布沟工程的水文分析计算

本文简要的介绍了瀑布沟工程水文分析计算主要依据站的选定和基本资料的插补延长,以及径流、洪水的分析计算方法.在可行性研究阶段水文成果(通过审查)和新设立的毛头码水文站所取得的数年水文资料的基础上,将初设阶段对可行性研究阶段的水文分析计算方法和成果进行验证和补充的情况重点予以介绍.     

热等静压技术的发展及应用

在介绍热等静压技术和设备发展的基础上，对其在提高铸件质量以及拓展高速钢、双炼钢和超级双炼钢、高性能陶瓷等新型材料应用领域方面的作用，进行了较全面的阐述。并预计，因热等静压技术所具有的优势，在今后几年其应用增长可达到每年递增15％-20％的水平，且随着其在铝加工工艺中应用的拓展，年增长率可望达到25％。