Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties.     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

层次分析法在工程评标中的应用

根据评标工作多层次多准则的特点,将层次分析方法引入工程评标中,并结合工程实例介绍了方法的具体运用。实践表明,层次分析法思路清晰,方法简便,能减少主观因素的影响,评价结果准确,是一种实用的工程评标方法。     

排序聚类分析算法在派生式CAPP系统中的应用及实现

利用零件的相似性原理对零件分组是派生式CAPP系统的重要内容,对零件的分组是否合理,直接影响到派生式CAPP系统能否正常运行。阐述了排序聚类分析算法在生产流程分析法中的工作原理,分析了利用该算法实现零件分组的实现过程,并用示例验证了该算法。     

Dynamics of Balancing Space and Time in Memory: Tau and Kappa Effects Revisited.

In 3 experiments, the authors studied the organization of spatiotemporal information in memory. Stimuli consisted of configurations of dots, presented sequentially. The stimuli were either proportional, with interdot distances corresponding to interdot durations, or not proportional, with interdol distances not corresponding to interdot durations. After a learning phase, participants reproduced the spatial (Experiment 1), temporal (Experiment 2), or spatial and temporal (Experiment 3) characteristics of the target 60 times in succession. In the nonproportional conditions, effects of variable interdot durations or distances on the reproduction of, respectively, constant distances (tau effect) or durations (kappa effect) were observed, whereas no such effects were observed when variable distances or durations were to be produced. Tau and kappa effects influenced the accuracy but not the variability of responses. The results are discussed in light of the distinction between properties of the stabilized mental image and the process of stabilization. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

国外几种脱硫醇工艺技术

硫醇是一种易挥发、有毒、腐蚀活性强的物质，在环保要求越来越严格的今天，必须将原油和凝析气中的硫醇加以脱除，才能达到环保要求。文章介绍了目前世界上采用的几种脱硫醇工艺。     

非织造布印花技术探讨

介绍了应用于非织造布印花的技术及工艺，对非织造布印花时应注意的事项进行了说明。     

柳钢35t转炉方坯连铸机系统优化措施

介绍柳钢35t转炉方坯连铸机系统优化措施，通过优化使生产稳定性提高，铸坯质量得到改善，提高各项经济技术指标。     

A study on the critical success factors for corporations embarking on knowledge community-based e-learning

Corporations have felt the pressure for fast-paced innovations and knowledge transfer as major driving forces in raising their sustainable competitive advantage and organizational total productivity. Thus, the development of the knowledge community through e-learning is an important strategy in implementing knowledge management policy. This paper illustrates an empirical study with which to conduct qualitative research of learning organization. From the case company’s real progress and practical experience, some core principles were extracted from four managerial aspects, such as: strategy, technology, process, and personnel. These aspects were analyzed in order to understand the value chain framework and the major concerns of knowledge community development. Further, the main benefits are addressed and certain critical factors are proposed and shown in this paper to ensure the success of corporations embarking on knowledge community-based e-learning.     

提高工程量清单编制质量的思考

文章从如何提高对工程量清单编制工作重要性的认识入手,分析了实现计价理念、计价侧重点和造价控制观念转变的必要性,重点阐述了提高工程量清单编制质量应给予足够重视的几个关键环节。