个体化预测梗阻性乙状结肠癌患者预防性肠造口回纳的风险Nomgram模型的建立

目的 探讨梗阻性乙状结肠癌患者预防性肠造口回纳的风险并建立Nomgram模型。方法 选取肠造口的乙状结肠癌患者104例，根据肠造口回纳时间分为延迟回纳组40例，正常回纳组64例。分析数据并建立相关Nomgram预测模型。结果 两组患者在肿瘤距肛缘的距离、术后辅助化疗、新辅助治疗、吻合口狭窄和吻合口漏方面的差异具有统计学意义。肿瘤距肛缘的距离、术后辅助化疗和吻合口漏是肠造口回纳延迟的独立危险因素。建立列线图模型，并进行验证，C-index指数为0.740(95%CI:0.691～0.789)。结论 肿瘤距肛缘的距离、术后辅助化疗和吻合口漏是影响梗阻性乙状结肠癌患者预防性肠造口回纳的独立危险因素；所建列线图预测模型具有良好的精准度和区分度。     

Some optical,magnetic and transport properties of CdMoO4:Nd3+

Single crystal of new cadmium and neodymium molybdate solid solution (Cd_0.958Nd_0.028□_0.014MoO₄, where □ denotes cationic vacancies) has been successfully grown by the Czochralski method. The X-ray diffraction analysis confirmed that this solid solution crystallizes in the scheelite type structure, the Nd³⁺ ions do not show long-range order and they are randomly distributed in the unit cell, substituting the Cd²⁺ ions. As a consequence, the unexpected properties of CdMoO₄:Nd³⁺ are observed such as the energy gap (~1.77 eV) twice smaller than that of the matrix CdMoO₄, a paramagnetic state with the short-range ferromagnetic interactions, behavior related to the electrical conductor with p–n transition along the 〈100〉 axis, the semiconducting behavior with n–p transition along the 〈001〉 axis and the diode-like behavior found to be of Schottky- or Maxwell-Wagner type. Therefore, we predict great potential of this single crystal for technical applications in electronic devices.     

Dietary Apigenin Exerts Immune-Regulatory Activity in Vivo by Reducing NF-κB Activity,Halting Leukocyte Infiltration and Restoring Normal Metabolic Function

The increasing prevalence of inflammatory diseases and the adverse effects associated with the long-term use of current anti-inflammatory therapies prompt the identification of alternative approaches to reestablish immune balance. Apigenin, an abundant dietary flavonoid, is emerging as a potential regulator of inflammation. Here, we show that apigenin has immune-regulatory activity in vivo. Apigenin conferred survival to mice treated with a lethal dose of Lipopolysaccharide (LPS) restoring normal cardiac function and heart mitochondrial Complex I activity. Despite the adverse effects associated with high levels of splenocyte apoptosis in septic models, apigenin had no effect on reducing cell death. However, we found that apigenin decreased LPS-induced apoptosis in lungs, infiltration of inflammatory cells and chemotactic factors’ accumulation, re-establishing normal lung architecture. Using NF-κB luciferase transgenic mice, we found that apigenin effectively modulated NF-κB activity in the lungs, suggesting the ability of dietary compounds to exert immune-regulatory activity in an organ-specific manner. Collectively, these findings provide novel insights into the underlying immune-regulatory mechanisms of dietary nutraceuticals in vivo.     

基于AVR单片机的智能养鱼控制系统设计与开发

以Atmega 8单片机为控制中心,利用温度传感器DS18B20、放料控制系统,结合无线射频等技术,设计并实现了智能养鱼控制系统。该系统具有投放饲料、补充氧气、PID温度调节等全过程进行智能化的自动控制和检测。     

Cure cycle optimization of an inorganic polymer matrix material for high temperature fiber reinforced composites

We investigated the potential effects of inorganic polymer processing conditions on the residual stress generation of fiber reinforced inorganic polymer matrix composites. By optimizing various stages of processing it was found that process-induced shrinkage can be reduced by as much as 20%, while simultaneously, the compression strength can be improved by over 30% compared to baseline processing parameters. Further with the optimization of the process parameters, the pore diameter reduced by over 65%, while the relative density increased by a little over 5%. These results suggest high temperature dimensional stability and reduced pore content. Also SEM images indicate a continuous thermodynamic transformation in the bonding strength between the precipitated particles. Thus, it is demonstrated that, through the process modification, a path exists to reduced cure shrinkage, high mechanical strength and thermodynamic stability that results in a potential reduction in residual stresses in continuous fiber reinforced, inorganic matrix composites.     

Ductility of polylactide composites reinforced with poly(butylene succinate) nanofibers

Sustainable “green nanocomposites” of polylactide (PLA) and poly(1,4-butylene succinate) (PBS) were obtained by slit die extrusion at low temperature. Dispersed PBS inclusions were sheared and longitudinally deformed with simultaneous cooling in a slot capillary and PBS nanofibers were formed. Shearing of PBS increases nonisothermal crystallization temperature by 30 °C. Tensile deformation was investigated by in-situ experiments in SEM chamber. Dominant deformation mechanism of PLA is crazing, however, there are dormant shear bands formed during slit die extrusion. Pre-existing shear bands are inactive in tensile deformation but contribute to ductility by blocking, initiating and diffusing typical craze growth. PBS nanofibers are spanning PLA craze surfaces and bridging craze gaps when PLA nanofibrils broke at large strain. Straight crazes become undulated because either dormant or new shear bands become activated between crazes. Due to interaction of crazes and shear bands the ductility increases while high strength and stiffness are retained.     

Influence of zirconium content on microstructure and creep properties of Mo–9Si–8B alloys

Mo–Si–B alloys with a molybdenum solid solution accompanied by two intermetallic phases and Mo₅SiB₂ are a prominent example for a potential new high temperature structural material. In this study the influence of 1, 2 and 4 at.% zirconium on microstructure and creep properties of Mo–9Si–8B (at.%) alloys produced by spark plasma sintering is investigated. Creep experiments have been carried out at temperatures of 1100 °C up to 1250 °C in vacuum. The samples exhibit sub-micron grain sizes as small as 450 nm due to the chosen production route. With addition of 1 at.% zirconium, formation of SiO₂ on the grain boundaries can be prevented, thereby enhancing grain boundary strength and creep properties significantly. Moreover ZrO₂ particles also enhance creep resistance of the molybdenum solid solution. Creep deformation is a combination of dislocation creep in the grains including dislocation-particle interaction and grain boundary sliding leading to intergranular fracture surfaces. It is promising to use grain size adjustments in order to balance the creep and oxidation resistance of the investigated material.     

Controlled retting of hemp fibres: Effect of hydrothermal pre-treatment and enzymatic retting on the mechanical properties of unidirectional hemp/epoxy composites

The objective of this work was to investigate the use of hydrothermal pre-treatment and enzymatic retting to remove non-cellulosic compounds and thus improve the mechanical properties of hemp fibre/epoxy composites. Hydrothermal pre-treatment at 100 kPa and 121 °C combined with enzymatic retting produced fibres with the highest ultimate tensile strength (UTS) of 780 MPa. Compared to untreated fibres, this combined treatment exhibited a positive effect on the mechanical properties of hemp fibre/epoxy composites, resulting in high quality composites with low porosity factor (α_pf) of 0.08. Traditional field retting produced composites with the poorest mechanical properties and the highest α_pf of 0.16. Hydrothermal pretreatment at 100 kPa and subsequent enzymatic retting resulted in hemp fibre composites with the highest UTS of 325 MPa, and stiffness of 38 GPa with 50% fibre volume content, which was 31% and 41% higher, respectively, compared to field retted fibres.     

Tribological properties of fluorinated graphene reinforced polyimide composite coatings under different lubricated conditions

The tribological properties of polyimide (PI) and PI/fluorinated graphene (FG) nanocomposites, as a new class of graphene reinforced polymer, are investigated using a ball-on-disk configuration under different lubricated conditions of dry sliding, water lubrication and oil lubrication. Experimental results reveal that single incorporation of FG can effectively improve the tribological performance of PI under all the three conditions. In addition, compared to the results under dry sliding, the phenomenon that the friction coefficient decreases while the wear rate increases under water lubrication condition is observed and researched in detail. The worst anti-wear performance under water-lubricated condition can be ascribed to the fact that the water can be adsorbed by the polar imide radicals of the PI and PI/FG nanocomposite, therefore leading to the property deterioration of the PI and PI/FG nanocomposite coatings.     

Using thin-plies to improve the damage resistance and tolerance of aeronautical CFRP composites

Thin-ply composites are currently receiving specific attention from researchers due to their capabilities to delay matrix cracking. In this paper, the aim is to design a hybrid laminate that contains both thin- and normal plies. The objective is to improve the tolerance of normal plies by adding thin-plies to the composite in different configurations. Two alternatives were designed, tested, and compared to the specimens made of traditional plies. Impact and compression after impact tests were conducted on each configuration at different impact energies. After being impacted, the specimens were c-scanned to define the delamination pattern. Results showed that surrounding each normal ply with two thin-plies improved the delamination threshold by 15% as compared to the specimens made all of normal plies. Under compression, 15% improvements in the compression after impact strength were obtained. By using thin-plies, the size of each individual delamination was reduced, resulting in small threads instead of peanut delaminations.