The effects of container size, frequency and extended horizontal reach on maximum acceptable weights of lifting for female industrial workers

In the development of our present manual materials handling (MMH) guidelines (Snook, S.H., Ciriello, V.M., 1991. The design of manual tasks: revised tables of maximum acceptable weights and forces. Ergonomics 34, 1197-1213), the assumption was made that the effects of frequency on maximum acceptable weights (MAWs) of lifting with a large box (hand distance, 38 cm from chest) were similar to that of lifting with a small box (hand distance, 17 cm from chest). The first purpose of the present experiment was to investigate this assumption with female industrial workers. The second purpose was to study the effects of extended horizontal reach lifting (hand distance, 44.6 cm from chest) on MAWs as a confirmation of the results of a previous studies on this variable with males (Ciriello, V.M., Snook, S.H., Hughes, G.J., 1993. Further studies of psychophysically determined maximum acceptable weights and forces. Hum. Factors 35(1), 175-186; Ciriello, V.M., 2003. The effects of box size, frequency, and extended horizontal reach on maximum acceptable weights of lifting. Int. J. Ind. Ergon. 32, 115-120). Lastly, we studied the effects of high frequency (20 lifts/min) on MAWs of lifting. Ten female industrial workers performed 15 variations of lifting using our psychophysical methodology whereby the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired weakened, overheated or out of breath". The results confirmed that MAWs of lifting with the large box was significantly effected by frequency. The frequency factor pattern in this study was similar to the frequency pattern from a previous study using the small box (Ciriello, V.M., Snook, S.H., 1983. A study of size distance height, and frequency effects on manual handling tasks. Hum. Factors 25(5), 473-483) for all fast frequencies down to one lift every 2 min with deviations of 7%, 15%, and 13% for the one lift every 5 and 30 min tasks and the one lift in 8h task, respectively. The effects of lifting with an extended horizontal reach decreased MAW 22% and 18% for the mid and center lift and the effects of the 20 lifts/min frequency resulted in a MAW that was 47% of a 1 lift/min MAW. Incorporating these results in future guidelines should improve the design of MMH tasks for female workers.     

Synthesis and characterisation of alumina pillared Texas montmorillonite and determination of the effective Keggin ion charge

Controlled calcination of Texas montmorillonite has allowed production of a range of materials of cation exchange capacity from 70 mequiv./100 g dry clay to virtually zero. Pillaring of these with Chlorhydrol precursor solution has then provided a family of materials of pillar density ranging from about one per six unit cells to zero. The analytical technique based on isomorphous metal dilution (IMD) that follows pillaring is validated. The results provide a consistent value for the precursor (Keggin) ion charge, in the conditions normally used, of 3.15±0.10 rather than the formal value of 7. An approach to the attainment of pillar densities consistent with the introduction of shape/size selectivity on pillared layered materials is outlined.     

Experimental study on the package of high-g accelerometer

In this paper, the effect of the package die adhesive and package shell on the performances of silicon based MEMS high-g accelerometers was reported. Using Raman spectroscopy, the residual stress caused by different package die adhesive thickness and different package shell material was characterized. It can be concluded from the testing results that: with thicker die adhesive, the residual stress increment was much smaller; the piezoresistance variation caused by this residual stress was much smaller; and the temperature shift of the output voltage was much smaller. Comparing with the ceramic package, the stainless steel package has bigger sensitivity and bigger anti-overload ability.     

Trunk kinematics of one-handed lifting,and the effects of asymmetry and load weight

Abstract

This study investigated trunk kinematic differences between lifts performed using either one hand (unsupported) or two hands. These effects were studied while beginning the lifts from different asymmetric starting positions and while lifting different load weights. Each subject lifted a box from a lower to an upper platform under one- and two-handed lifting conditions. Subjects wore a lumbar spine electrogoniometer, from which relative motion components were calculated in the trunk's three cardinal planes. Results of this study showed that one-handed lifting resulted in significantly higher ranges of motion in the lateral and transverse planes and greater flexion in the sagittal plane. Back motion characteristics previously found to be associated with low back disorders were all significantly higher for one-handed lifts. The two-handed lift technique, on the other hand, produced overall faster trunk motions in the sagittal plane and equal or larger acceleration and deceleration magnitudes in all planes of motion. Increases in load asymmetry affected trunk kinematics, in that magnitude values for range of motion, velocity and acceleration became much greater with increasingly asymmetric load positions. Increasing the load weight appeared to have less of an effect on trunk kinematics, with increases in position mostly occurring during sagittal and lateral bending. These results suggest that unsupported one-handed lifting loads the spine more than two-handed lifts, due to the added coupling. Applying these results to a previously developed model, one-handed lifting was also found to increase one's risk of suffering a low back disorder.     

A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling

Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in die job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0·5-87·0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58 800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.     

Hand-hold location and trunk kinematics during box handling

Trunk kinematics variables have been shown to be related to low back injury risk during lifting tasks and it was hypothesised that changes in hand-hold positions could influence trunk kinematics and thereby risk. Fourteen subjects lifted a 5 or 10 kg box using four different hand placement locations (two symmetric and two asymmetric) while their trunk kinematics (position, velocity and acceleration in the sagittal, coronal and transverse planes) were captured using the lumbar motion monitor (LMM). These kinematics data were then used to calculate the probability of high risk group membership (PHRGM) as defined in the LMM risk assessment model. The results showed significant effects of hand placement on trunk kinematics, resulting in significant changes in the PHRGM variable ranging from a low of 20% in a the symmetric low load condition to a high of 38% under the asymmetric, 10 kg condition.

Statement of Relevance: Manual materials handlers use a variety of hand-hold positions on boxes during lifting. Where a lifter grabs the box can influence the trunk kinematics during the lifting task and these kinematics have been shown to provide some insight into risk of low back injury. This study documents the trunk postures and kinematics as a function of hand-hold position.     

A review of “ The Co-ordination and Regulation of Movements” By N. Bernstein. (Pergamon Press, 1967.) [ Pp. xii+ 196.] 505

Abstract

The complaints of workers in a noisy workshop were taken as the basis of recognition and attitude to noise. However, all the complaints based on noise exposure could not be attributed to neurotic responses. The distinctive character of homeostatic changes induced by noise exposure was attributable to the depression of the adreno-cortical function. The possibility was considered that the metabolism of the brain was disturbed by the noise exposure. It was concluded that the complaints of workers exposed to noise must be considered from the view-point that workers have a physical, mental and social existence.     

汉语专书词汇研究工作流程的信息化及应用

汉语专书词汇研究是汉语词汇学的基础内容,目前主要依靠人工方式完成,研究效率低、数据可靠性差、成果难以共享,不能满足语言研究及信息化的发展需要.调研和分析了专书词汇的研究过程,建立了专书词汇研究的工作流模型,提出了基于扩展标记语言(XML)的CVML数据交换格式,完成了面向专书词汇研究的信息化系统的设计和实现,推进了汉语专书研究工作的信息化进程.应用实践表明该系统可以有效提高研究效率,保障数据的正确性,并增强研究成果的可共享性.