挤压六通管及其连接结构的安全性研究

六通管是石油化工设备及压力管道中的重要元件,传统的制作及连接方法是在集流管上开孔,然后将支管插入并焊接而成或采用锻制的方法制成。采用挤压的方法制作六通管,将其与支管对接焊接。并通过试验及数值模拟对该结构的安全性进行了研究,实践证明,这种挤压六通管的强度性能优于普通的焊接六通管,可以广泛应用于工业生产。     

圆锥孔径测量方法与误差分析

圆锥孔径的测量往往比较困难、且精度较低。提出长度测量仪器与环规配合使用,应 用比较测量的方法检测圆锥孔的直径。通过计算和分析可以得出,当被测圆锥孔径不大于180 mm 时,其测量不确定度可小于1.84 μm。给出了测量方法和不确定度计算公式供操作时参考。     

低位放顶煤液压支架的改造

对ZFSB4 0 0 0 / 18.5 / 2 8、ZFG4 4 0 0 / 18.5 / 2 9型液压支架在新集一矿使用中存在的问题进行了分析 ,提出了改进措施。通过改造 ,解决了支架在顶板支护、后溜拉移中存在的问题 ,消除安全隐患 ,为设备检修创造条件。     

德国艾柯夫SL-500采煤机变频器故障及分析

晋城煤业集团引进德国艾柯夫SL-500采煤机,在使用过程中,短时间内连续出现多台变频器烧坏现象,这在艾柯夫采煤机使用过程中是从未有过的事,也给本公司的原煤生产造成了很大影响。为了杜绝此类事情的再次发生,特对本次的故障排除方法进行了认真的分析总结,为今后应用与修理采煤机提供了意见。     

乙烯装置制冷系统的用能分析

通过对制冷压缩机功耗的模拟和对实际运行数据的分析,比较了乙烯装置中的复迭多级制冷系统和混合冷剂制冷系统的用能状况,分析了混合冷剂制冷的优点和不足。采用AspenPlus10.2软件模拟的结果表明,采用混合冷剂制冷技术的丙烯-混合冷剂复迭制冷系统比传统的丙烯-乙烯复迭制冷系统节省功耗4.3GJ/h,制冷压缩机损系数则从47.6%减小到43.3%,而系统效率由25.0%提高到26.6%。虽混合冷剂在换热过程中出现的气液两相流,会在一定程度上抵消其在热力学效率上的优势,但混合制冷技术用于乙烯装置仍可降低能耗、提高热力学效率。     

Drying of Chestnuts (Castanea sativa Mill.) after Osmotic Dehydration with Sucrose and Glucose Solutions

Chestnuts were dehydrated by using a combined method of osmotic dehydration followed by air drying. Samples were osmotically pretreated with sucrose (60% w/w) and glucose (56% w/w) for 8 h, air-dried at temperatures of 45, 55, and 65°C, at a relative humidity of 30% and at a velocity of 2.7 m·s^-1 and the experimental data of the drying kinetics were obtained. Whole samples were dried with different peelings: (a) removal of endocarp and pericarp (peeled) and (b) additionally the internal rough surface (cut). In all cases, cut chestnuts show greater drying rates than peeled samples, indicating that a significant mass transfer resistance in the layer nearest to the surface takes place. Peeled samples pretreated with sucrose solutions behave in a similar way to untreated samples. For the rest of the samples, the cut samples osmotically treated with sucrose solutions and all the samples treated with the glucose solution, the drying rates decrease during drying. Drying kinetics are successfully modeled by employing a diffusional model that takes the shrinkage into account. The effective coefficient of water diffusion was evaluated and correlated with temperature. The quality of the final product was monitored by color change. In spite of the fact that the total color difference is not modified by the osmotic treatment, the L*, a*, and b* color coordinates of cut samples treated with sucrose and glucose solutions do undergo changes; the L* and a* coordinates change less than the b*.     

A stability classification method and its application to pipelined solution of linear recurrences

A new method of classification for numerical stability of parallel algorithms is proposed based on the theoretical foundation of forward error analysis. It partitions the algorithms according to their asymptotic stability—a measure introduced to relate the limiting behavior of the stability to the size of the problem. Using this method, the stability aspect of the pipelined solution technique for first-order and second-order linear recurrences—the core of a tridiagonal linear equation solver—is studied. In particular, it shows that the pipelined solution method of the first-order linear recurrences has the same degree of stability as the commonly used sequential evaluation algorithms. The stability problems of sequential and pipelined solution methods of the second-order linear recurrences are also studied.     

钢筋混凝土防撞护栏早期裂缝成因分析及预防

从设计方面、施工方面及混凝土原材料的质量及配合比设计三方面分析了钢筋混凝土防撞护栏表面早期裂缝出现的成因,并提出了相应的预防措施,以有效防止护栏表面裂缝的产生。     

引滦入唐工程某渡槽裂缝成因及对策分析

针对引滦入唐工程中某渡槽的开裂情况，从渡槽的两个使用状态入手进行分析，考虑按旧规范计算对设计造成的误差，采用大型有限元分析程序分析了渡槽各种工况的运行情况，并根据使用情况分析了开裂原因，提出了加固意见和同类渡槽设计的建议。