三轴光纤陀螺测控装置

光纤陀螺测控装备主要是检测陀螺的性能指标,保障陀螺的精确度和稳定性.论文介绍了一套三轴光纤陀螺测控装置,采用美国NI公司生产的计数器卡和多功能数据采集卡以及研华公司的工控机搭建硬件平台,采用LabVIEW编程语言实现软件部分的测试功能.三轴光纤陀螺测控装置通过主控计算机对三轴转台的运动模式进行控制,给被测三轴光纤陀螺提供所需的电源和时钟信号,同时对产品27V供电电压和电流进行实时监测和保护,并对产品的六路输入、输出信号进行隔离、调理,通过设定的测试程序自动采集并存储,然后对测试数据进行建模和计算,获得被测产品的各项性能参数.从而实现了三轴光纤陀螺的性能指标测试,具有良好的可视化人机交互界面.     

陀螺稳定装置载体角振动仿真模型构建方法

建立了坦克装甲车辆行驶角振动和陀螺稳定装置载体角振动关系的数学模型,实现了在坦克装甲车辆行驶振动条件下火炮稳定性能的计算机仿真测试,为评价火炮控制系统的设计提供了一种依据。     

Investigation of Ozone Loss Rate Influenced by the Surface Material of a Discharge Chamber

Decay characteristics of ozone concentration in oxygen in a chamber with three types of wall material (stainless steel, copper, and aluminum) are measured using the 254 nm photoabsorption method. Effective lifetimes of ozone are estimated from decay curves of ozone concentration. These values depend on the wall material: They are largest for stainless steel and smallest for aluminum. The relationship between effective lifetime and gas pressure is investigated precisely to determine three values. The equivalent diffusion coefficient of ozone in oxygen and the reflection coefficient of ozone at the wall correspond to the loss rate of ozone at the wall. The collisional loss (quenching) rate coefficient of ozone in oxygen is also determined.     

A theoretical study of solvent effects on Kolbe-Schmitt reaction kinetics

A theoretical DFT study was employed to confirm the Kolbe-Schmitt reaction mechanism and investigate solvent effects on this reaction. The use of a solvent in the Kolbe-Schmitt reaction is desirable to facilitate a homogeneous reaction mixture and potentially improve the reaction rate. The candidate solvents were designed using computer aided molecular design (CAMD) and tested using DFT solvation calculations. The results from the quantum mechanical calculations were then used to determine the rate constants for each elementary step, the overall reaction yields and the corresponding residence time. The methodology was tested on the reaction without solvent, with solvents reported in the literature, and with the designed solvents. The study revealed that in the presence of solvents with high dielectric constant the reaction becomes reversible, leading to low product yields.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.     

PVC/SBS/MBS三元共混体系的力学性能及光学透明性研究

采用冲击实验、拉伸实验、超景深三维显微镜、扫描电镜和分光光度计等手段，对PVC／SBS／MBS三元共混体系的冲击强度、拉伸强度、形态结构以及光学透明性等进行了研究。实验结果表明，MBS能有效改善PVC／SBS共混体系的界面相容性。当SBS和MBS的总量不变时，随着MBS相对含量的增加，共混体系的缺口冲击强度逐渐增加，透光率在m（MBS）／m（SBS）=28／80时达到最大值，光学透明性能最好。     

Rate mechanisms of plasticity in semi-crystalline polyethylene

Based on our experiments on polyethylene where we have observed a constant level of plastic resistance, independent of lamella thickness exceeding 40 nm, we have fundamentally re-considered the rate controlling mechanisms of crystal plasticity in semi-crystalline polymers. In this we have not only re-examined and made modifications to the widely accepted mechanism of Young (Young RJ. Mater Forum 1988;11:210.) of monolithic nucleation of screw dislocations from edges of crystalline lamellae predicting an increase in plastic resistance with increasing lamella thickness, but we are proposing here two new modes of nucleation of both edge and screw dislocation half loops from lamella faces that are independent of lamella thickness. These two new modes of dislocation nucleation explain well the observed transition from a plastic resistance increasing with lamella thickness to one of constant resistance above a lamella thickness of ca. 35 nm in polyethylene. They also provide a more satisfactory framework to explain the temperature and strain rate dependence of the plastic resistance of polyethylene and predict the observed levels of activation volumes determined by us.     

基于颜色与投影特征的车牌定位

车牌定位是车牌识别系统的关键技术。定位的准确与否直接影响车牌识别的结果。本文根据车牌的颜色特征和投影特征提出了一种综合颜色特征和投影特征相结合的定位方法,算法分为粗定位和精确定位。该方法较单一特征的定位方法有较好的通用性,可适应于不同背景、不同光照下的汽车图像,能够确定出车牌区域,准确率得到了较大提高。     

中国银行利率风险实证分析

随着中国融入世界的步伐加快,加入WTO中要求中国放开金融市场的开放程度,利率管制的放松也将逐步的实行,利率风险日益成为中国商业银行面临的重要风险之一。本文从理论和实践角度对中国商业银行的利率风险进行了分析和研究,剖析中国商业银行存在的诸多障碍,指出了商业银行风险管理中存在的问题,并提出中国商业银行利率风险管理建议。     

基于磁强计和陀螺测量的卫星轨道姿态一体化确定算法

突破卫星轨道和姿态参数分别确定分而治之的传统模式,提出了利用磁强计和陀螺测量信息同时确定卫星轨道和姿态参数的新方法。利用磁强计提供的地磁场测量值与地磁场模型计算值之间的差值,以及陀螺提供的角速度信息,推导了轨道姿态一体化确定扩展卡尔曼滤波算法。利用局部可观测性理论定量地计算系统局部可观测矩阵的条件数,进而利用该条件数对系统的可观测性进行深入分析。最后对本文算法进行了数学仿真,结果表明该算法的可行性和有效性。