基于聚类方法的软件设计与应用

通过对聚类算法和技术的研究,设计和研制了层系优化配套软件,并应用到油田的开发层系细分与优化.通过分析东辛地区沙河街组的沙二段8-11砂层组8个小层的实体属性,用研制的细分开发层系软件对辛16断块的层系进行划分与组合评价,最终优选出合理的开发层系组合,表明了聚类方法技术在油藏高含水期细分开发层系中的可行性和科学性.     

基于信任模型的安全应用层多播协议

针对ALM(application layer multicast)安全性方面存在的问题,设计了一种新的ALM协议.节点加入多播组时,协议对节点的信任度进行认证检测.在交互过程中动态计算节点信任度,以便准确识别覆盖网中的恶意节点.同时,通过标签机制,有效防止了节点对信任信息的恶意篡改.仿真实验结果表明,该协议能有效区分恶意节点并对其进行控制,对多播安全性方面存在的问题有较大改进.     

代理型应用层组播体系结构研究

组通信技术是未来互联网应用的关键支撑技术.目前,应用层组播是组通信技术研究中的热点,而代理型应用层组播体系结构已成为组播体系结构研究的重要方向之一.首先概述和比较了IP组播、主机型应用层组播和代理型应用层组播3种组播体系结构,接着重点研究和分析了代理型应用层组播体系结构的研究现状.以此为基础,进一步总结了代理型应用层组播体系结构设计中需要考虑的基本问题,并针对现有体系结构的不足,探讨了设计新的代理型应用层组播体系结构中值得关注的问题.最后对未来工作进行了展望.     

Fuzzy boundary layer tuning for sliding mode systems as applied to the control of a direct drive robot

Chattering in the control signal is a significant problem in sliding mode control (SMC). The boundary layer approach is one of the many modifications proposed in the literature to avoid the chattering. In this approach, instead of the discontinuous SMC, a continuous feedback control law is employed in a boundary layer around the sliding surface. The thickness of the boundary layer is an important design parameter. This paper proposes a fuzzy online tuning method to adjust the boundary layer thickness for the best system performance without chattering. The method features the measurement of the chattering in the control signal. The paper validates the performance of the algorithm by experiments on a direct drive robot with a range of different payloads.     

网络资源的多层监测方法与实现

设计了针对网络资源不同层次进行监测的实现方法,这些层次包括：网络传输层对象（网络服务器性能、TCP、UDP实现过程）、应用层对象（主要是业务数据库）、表示层对象（页面及相关的脚本行为）、用户（浏览器）以及Web服务（HTTP协议实现过程）。对于不同层次的数据,采用了不同的采集方法,并实现了对不同监测资源的重新组合分析。在分层获取、分析、存储数据基础上进行了统一身份认证、统一展示标准和指标集成展示,从而实现了分布式监测系统的集成。     

一种卷板填充分层递归排样的优化算法

研究了卷板填充排样问题,提出了一种分层递归排样的优化算法。算法使用水平剪切线将卷板分层,每层的宽度和卷板宽度相同,高度和层最左端的主毛坯高度相同;通过调用递归过程确定卷板中层的排列,为各层选定主毛坯,并确定毛坯的排列方式;采用分支定界技术缩小搜索空间。实验结果说明该算法比文献中最近报道的几种算法都有效。     

回转体头部压力分布规律及其对转捩点的影响

以圆头回转体为研究对象,头部线型采用双参数椭圆曲线,利用面元法求解绕流势流流场,利用F.W.Scholkemeier的积分方法,确定该压力分布下的层流边界层,利用P.S.Granville方法求解边界层转捩点.通过变换头部线型参数,以最小压力系数绝对值的下降方向为搜索方向,研究不同头型压力分布的变化规律及其对转捩点的影响.结果表明:最小压力系数绝对值越小的头型其最小压力点离头部驻点的距离越近;不同头型的转捩点不光与其压力分布有关,而且还与其头部长径比有关.     

Microstructure and properties of (Sr, Ca)CuO2/(Sr, Ca)RuO3 multilayers

Epitaxial multilayer thin films of infinite-layer (Sr, Ca)CuO₂ and perovskite (Sr, Ca)RuO₃ have been prepared on (100) SrTiO₃ substrates by multitarget rf magnetron sputtering. X-ray diffraction analyses revealed that the multilayer structure of (Sr, Ca)CuO₃/(Sr, Ca)RuO₃ was successfully fabricated with a minimum layer thickness of 20 Å. Transmission electron microscopy measurements of the multilayers indicated that there was no dislocation which normally exists in single-layer films with an infinite-layer structure. Resistivities of multilayer films at room temperature ranged from 1 to 10 m cm and showed semiconductor-like dependence against the temperature.     

Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.     

Solid Solvation Assisted Electrical Doping Conserves High-Performance in 500 nm Active Layer Organic Solar Cells

Organic solar cells (OSCs) process fascinating solution-printing capability to achieve low-cost and large-scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L_dr) and diffusion (L_diff) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick-film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm² devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long-term, thick-film, and large-area.