CDMA时变色散信道的两级盲辨识算法

本文通过对时变信道的扩展函数在时频域进行正则采样，得到了CDMA时变系统的离散正则模型。针对该模型提出了一种具有较低运算量的两级盲辨识算法。为避免两级算法产生的误差传播效应，文章将理想SIMO模型等效为加性噪声模型来处理。与基展开模型方法相比，该算法具有不需利用观测数据的高阶统计量估计展开基频率的优点。文章通过仿真验证了该算法是可行的。     

The smooth fractionator

A modification of the general fractionator sampling technique called the smooth fractionator is presented. It may be used in almost every situation in which sampling is performed from distinct items that are uniquely defined, often they are physically separated items or clusters like pieces, blocks, slabs, sections, etc. To each item is associated a ‘guesstimate’ or an associated variable with a more‐or‐less close – and possibly biased ? relationship to the content of the item. The smooth fractionator is systematic sampling among the items arranged according to the guesstimates in a unique, symmetric sequence with one peak and minimal jumps. The smooth fractionator is both very simple to implement and so efficient that it should probably always be used unless the natural sequence of the sampling items is equally smooth. So far, there is no theory for the prediction of the efficiency of smooth fractionator designs in general, and their properties are therefore illustrated with a range of real and simulated examples. At the cost of a slightly more elaborate sampling scheme, it is, however, always possible to obtain an unbiased estimate of the real precision and of some of the variance components. The only real practical problem for always obtaining a high precision with the smooth fractionator is specimen inhomogeneity, but that is detectable at almost no extra cost. With careful designs and for sample sizes of about 10, the sampling variation for the primary, smooth fractionator sampling step may in practice often be small enough to be ignored.     

微分代数方程的一类并行算法

本文提出求解微分代数方程的一类并行算法,进行误差估计。对于一个模型问题进行稳定性分析,画出稳定区域。计算实例表明算法是有效的。     

Variability in stepping direction explains the veering behavior of blind walkers.

Walking without vision results in veering, an inability to maintain a straight path that has important consequences for blind pedestrians. In this study, the authors addressed whether the source of veering in the absence of visual and auditory feedback is better attributed to errors in perceptual encoding or undetected motor error. Three experiments had the following results: No significant differences in the shapes of veering trajectories were found between blind and blindfolded participants; accuracy in detecting curved walking paths was not correlated with simple measures of veering behavior; and explicit perceptual cues to initial walking direction did not reduce veering. The authors present a model that accounts for the major characteristics of participants' veering behavior by postulating 3 independent sources of undetected motor error: initial orientation, consistent biases in step direction, and, most important, variable error in individual steps. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

饱和软土天然含水量估算指标及ω一e回归方程的建立

天然含水量ω是土的最基本物理量指标之一。采用数理统计方法，建立经验方程来修正土的天然含水量ω的测定值，使修正后的天然含水量数值与实际中的真值符合程度更为接近，效果甚好。     

Zero aliasing ROM BIST

Signature analyzers are very efficient output response compactors for BIST design. The only limitation of signature analysis is the fault coverage reduction (aliasing) due to the information loss inherent to any data compaction. In this article, in order to increase the effectiveness of ROM BIST, we take advantage from the simplicity of the error patterns generated by ROMs and we show that aliasing free signature analysis can be achieved in ROM BIST.This work was performed when the author was on leave from Minsk Radio Engineering Institute, Computer Department, Belorus.     

线性联合检测算法在TD-SCDMA系统中的性能分析与比较

时分、同步码分多址（TD－SCDMA）系统是基于时分双工（TDD）的块传输系统，它使用了联合检测这项关键技术来抵抗符号间干扰（ISI）和多址干扰（MAI）。以上行链路为例，本文分析了三种线性联合检测算法－－匹配滤波块均衡器（MF－BLE）、迫零块均衡器（ZF－BLE）和最小均方误差块均衡器（MMSE－BLE）。从理论上，我们描述了这三种线性联合检测算法的基本原理，并对它们进行了比较（包括抗干扰性能和计算量）。随后，我们模拟了不同参数条件下（信道模型、码道数目、天线数目）这几种算法的性能，并与理论分析进行对照，得出一定结论。     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

静电驱动悬臂梁数模转换器设计、分析与模拟

提出了一种新型的微电子机械数模转换器 (MEMDAC)———静电驱动悬臂梁数模转换器 .与传统的静电驱动悬臂梁执行器相比 ,新的结构能更精确地控制梁的挠度 .文中给出了此MEMDAC的设计、分析和模拟过程 .有限元(FEA)分析表明此MEMDAC的最大输出位移为 1 5 1μm ,分辨率为 0 1μm ,其最大非线性误差为 0 0 3μm .     

Corrosion fatigue of extruded magnesium alloys

Corrosion fatigue tests were carried out on extruded AZ31 (3% Al, 1% Zn, 0.3% Mn, Mg—the rest), AM50 (5% Al, 0.4% Mn, Mg—the rest) and ZK60 (5% Zn, 0.5% Zr, Mg—the rest) Mg alloys in air, NaCl-based and borate solutions. N_sol/N_air ratios (the relative fatigue life) were used for the analysis of the corrosion fatigue behavior of Mg alloys in various environments, where N_sol and N_air are the numbers of cycles to failure in the solution and in air, respectively. Extruded ZK60 alloy reveals very high fatigue and corrosion fatigue properties in comparison with other alloys. However, it has the lowest relative fatigue life (N_sol/N_air 10⁻³–10⁻²) or the highest sensitivity to the action of NaCl-based solutions in comparison with that of AM50 and AZ31 alloys (N_sol/N_air 10⁻²–10⁻¹). Under the same stress, the corrosion fatigue life of extruded alloys is significantly longer than that of die-cast alloys (N_sol for extruded AM50 in NaCl is two to three times longer than that of die-cast AM50).