含腐蚀凹坑尿素合成塔的安全评定与分析

对尿素合成塔上封头腐蚀凹坑采用中国SAPV-95和美国API579规范分别进行安全评定，给出安全裕度，简略分析安全评定的结果。     

用有限元确定起重机裂纹补强板的参数

采用ANSYS有限元分析软件，对因出现裂纹的起重机主梁而添加的补强板进行系列计算，得出修补后主梁裂纹的应力及应力强度因子的变化规律。结果表明，采用参数适当的补强板，可降低起重机主梁裂纹尖端的应力，从而保证起重机的安全。     

圆锥面无键联接技术在重型冷剪机中的应用

本文对圆锥面无键联接技术进行了介绍，并以冷剪机为背景对圆锥面无键联接技术进行了具体的探讨，阐明了设计计算过程、装拆工艺方法及安全注意事项等。     

Bridge design with reserve and residual reliability constraints

System reliability is evolving as an important design method for selecting components and topology. It should be used to investigate the original intact structure behavior as well as providing sufficient reserve capacity under likely accident and damage scenarios. Highway bridges are an area of special concern since effort to optimize the cost of construction may not provide adequate redundant capacity. The paper describes an example in which a typical girder bridge structure is optimized (both size and girder spacing) to achieve target system performance. System reliability constraints are imposed on the behavior of the intact structure under highway loads. Also, residual system reliability constraints are imposed to control safety under specified accident scenarios corresponding to damage and “lost” members due to corrosion, fatigue, fire or accidental collisions. An optimal design framework for controlling safety under all these life cycle situations is thus provided.     

Surveillance test policy optimization through genetic algorithms using non-periodic intervention frequencies and considering seasonal constraints

In order to maximize systems average availability during a given period of time, it has recently been developed a non-periodic surveillance test optimization methodology based on genetic algorithms (GA). The fact of allowing non-periodic tests turns the solution space much more flexible and schedules can be better adjusted, providing gains in the overall system average availability, when compared to those obtained by an optimized periodic test scheme. This approach, however, turns the optimization problem more complex. Hence, the use of a powerful optimization technique, such as GA, is required.Considering that some particular features of certain systems can turn it advisable to introduce other specific constraints in the optimization problem, this work investigates the application of seasonal constraints for the set of the Emergency Diesel Generation of a typical four-loop pressurized water reactor in order to planning and optimizing its surveillance test policy. In this analysis, the growth of the blackout accident probability during summer, due to electrical power demand increases, was considered. Here, the used model penalizes surveillance test interventions when the blackout probability is higher.Results demonstrate the ability of the method in adapting the surveillance test policy to seasonal constraints. The knowledge acquired by the GA during the searching process has lead to test schedules that drastically minimize test interventions at periods of high blackout probability. It is compensated by more frequent redistributed tests through the periods of low blackout probability in order to improve on the overall average availability at the system level.     

Accidents,often the result of an ‘uncontrolled business process’—a study in the (Dutch) chemical industry

Often companies in the (petro‐) chemical industry claim that all possible countermeasures against potential accidents have been taken and therefore accidents are unforeseeable. In this paper we question this statement by analysing the pre‐warning signals (precursors) preceding a number of industrial accidents. 17 accidents that occurred in the (petro‐) chemical industry have been investigated by exploring FACTS, an accident database containing information about industrial accidents worldwide. This paper will demonstrate that the existence of precursor information could have been used to foresee and even prevent these accidents if a proper control action had been initiated. The accidents are analysed further, according to a control model, which was adapted from that of C. Argyris. It demonstrates the ineffectiveness of several elements of business process control loops and that the so‐called ‘double‐loop learning’ cycle is more important than the ‘single‐loop learning’ cycle if one considers safety improvement. Copyright © 2003 John Wiley & Sons, Ltd.     

薄管板换热器的设计及薄管板计算的探讨

结合化肥厂丁辛醇装置薄管板换热器的设计 ,着重分析薄管板的特点 ,应用合理的计算方法对薄管板进行强度校核 ,验证这一新型换热器的安全性和经济实用性     

变权组合预测模型在大坝安全监测中的应用

简要介绍了组合预测模型的基本原理，该模型改进了单一模型考虑因素的片面性，但常规的组合预测模型的权系数是固定的。考虑到各种模型的预测精度的变化，以及大坝安全监测数据存在的突变、时效等因素，固定权系数的组合预测模型有待进一步改进。文中提出了变权系数组合预测模型，并将其用于实际的大坝安全监测工程。结果表明，变权组合预测模型的预报精度高于其他模型。是一种值得推广的方法。     

河南电力远程教育网系统安全方案开发应用

河南省电力公司远程教育平台,作为一个省内电力系统职工的再教育、技术培训、技能培训中心,访问量大,安全要求高,我们在软件设计时充分考虑到系统的安全性。     

在役油气管道安全评定软件

PSAforWindows是运行在Windows系统下的油气管道安全评定软件。该软件既可以用于在开挖中发现的管道局部缺陷的剩余强度的精确评定 ,又可以用于腐蚀检测之后对管道全线的安全评定与剩余寿命预测。软件中采用了非线性有限元分析、失效评定图和概率性的评定方法等最新成果。介绍该软件的结构、模块、软件特点、主要功能和操作界面