Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.     

3-N-丙酰基-2-芳基-5-(3-碘苯基)-1,3,4-(口恶)唑啉类化合物的合成及表征

以3-碘苯甲酸为原料,在浓硫酸作用下与乙醇反应制得3-碘苯甲酸乙酯(1),再以无水乙醇为溶剂,在105℃化合物1与80％的水合肼反应8 h,制得3-碘苯甲酰肼(2)。在无水乙醇中,在90～95℃化合物2分别与4-甲基苯甲醛、2-氯苯甲醛、4-氯苯甲醛、4-羟基苯甲醛、2,4-二氯苯甲醛、4-甲氧基苯甲醛、3-硝基苯甲醛、4-硝基苯甲醛和4-二甲氨基苯甲醛反应得到相应的酰腙[3(a～i)]。最后化合物3(a～i)分别与丙酸酐脱水环化成了3-N-丙酰基-2-芳基-5-(3-碘苯基)-1,3,4-(口恶)唑啉类化合物[4(a～i)],收率分别为86．2％,70．5％, 80．1％,68．2％,62．4％,75．2％,73．2％,70．5％和63．2％。并通过元素分析,IR,1H NMR和MS对化合物4(a～i)的结构进行了表征。     

Combustion of bulk density powder mixtures in a coflow of nitrogen gas: 3. The Ti-(Ti + 0.5C) layered system

Explored is the filtration combustion in Ti-(Ti + 0.5C) layered powder systems in a coflow of nitrogen gas. The presence/absence of nitrogen coflow through the layered system was found to drastically affect the character of wave propagation and structure/properties of product. The obtained data can be regarded as a basis for fabrication of new layered and composite materials in the mode of dynamic filtration combustion.      

Pulsating Jet Impingement Heat Transfer Enhancement

This article presents results from a numerical study of pulsating jet impingement heat transfer. The motivation is to seek conditions offering a significant enhancement compared to steady flow impingement drying. The CFD software package FLUENT was used for simulating slot-type pulsating jet impingement flows with confinement. The parameter study included velocity amplitude ratio, mean jet velocity, and pulsation frequency. The distance from nozzle exit to surface was three times the hydraulic diameter of the nozzle. The Reynolds number based on the nozzle hydraulic diameter and jet temperature was 2,460 with a mean jet velocity of 30 m/s, which is the base case of the numerical experiments. Results showed that time-averaged surface heat transfer increased with increasing velocity amplitude for the same mean jet velocity. Large velocity amplitudes helped enhance heat transfer by two mechanisms: high jet velocity during the positive cycle and strong recirculating flows during the negative cycle. For the cases with different mean jet velocities but the same maximum velocity, time-averaged surface heat flux decreased with decreasing mean jet velocity. As for the effects of pulsation frequency, with high-velocity amplitude ratio, time-averaged surface heat fluxes were at the same level regardless of frequency. However, at low-velocity amplitude ratio, high frequency caused stronger recirculating flows resulting in greater heat transfer compared to the cases with a lower frequency.     

Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

Characterization of Thai limestone for desulphurization in a fluidized bed combustor

The objective of this study is to determine the chemical kinetics of desulphurization of Thai limestone in an atmospheric fluidized bed combustor (AFBC). The experiments, which employed the batch technique using the limestone samples from six major sources in Thailand, were performed in a laboratory‐scale AFBC. The results obtained were analysed and correlated in the form of apparent reaction rate and deactivation rate constants as a function of operating conditions of the furnace and their properties, respectively. The formulae derived from these correlations were kept as general as possible in order that they could be used as input parameters for the selected mathematical model of desulphurization in an AFBC that is suitable for practical use. The predicted results were in good agreement with the experimental data reported in the literature. Copyright © 2003 John Wiley & Sons, Ltd.     

三氯乙酰氯的合成与应用

综述了三氯乙酰氯的合成方法及其在农药、医药等领域中的应用。     

十二烷硫基硼酸铈的合成及摩擦学行为研究

合成了油溶性化合物十二烷硫基硼酸铈(简称CeDMB)，并用作润滑油添加剂。采用四球摩擦试验机和环—块试验机评价了其抗磨减摩性能。结果表明，十二烷硫基硼酸铈使HVI500基础油的抗磨性能得到明显改善，承载能力明显提高，摩擦系数明显降低。扫描电子显微镜(SEM)观察证实磨斑表面含有沉积物膜，结合X—射线光电子能谱(XPS)分析，可以推断添加剂在摩擦过程中发生摩擦化学反应，生成的Ce2O3、CeO2和B2O3沉积在摩擦副表面，形成润滑膜，从而改善其抗磨减摩性能。     

Synthesis of silicon oxynitride by infiltration-mediated combustion

Silicon oxynitride Si₂N₂ O was synthesized from a mixture of Si, SiO₂, and Si₃N₄ by infiltrationmediated combustion in nitrogen gas. The chemical/phase composition of product and process parameters (temperature and burning velocity) were studied upon variation in charge composition and initial pressure of gas reagent. Parameters of the reaction yielding single-phase Si₂N₂O have been optimized.