风机冷风保安控制系统优化

介绍菜钢型钢AV80风机冷风保安控制系统的优化改造,以增加其控制安全性及可靠性.     

Probabilistic and interval reliability design of the composite pressure vessel

Considering the randomness or interval character of physical parameters and applied loads of composite pressure vessels (COPV), the COPV reliability-analyzing model is built. And then the computational expressions for the mean value, standard deviation and deviation of fiber stress are deduced by the random factor method. The probabilistic and interval reliability designs on COPV are implemented by utilizing the probabilistic method and interval method combined with the improved particle swarm optimization (PSO) algorithm, respectively. The influence of fluctuation of structure uncertain parameters on COPV design thickness is inspected. Finally, examples are given to demonstrate that both probabilistic and interval reliability methods can satisfy the safety requirement and both are of higher rationality than the traditional safety factor method. And probabilistic method has a lower relative error but a higher computational complexity contrasted with the interval method.     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.     

二维直线运动平台几何误差建模与数字化分析

针对二维直线运动平台的定位精度受到绕X、Y、Z三个方向转动产生的角位移误差和沿着这三个方向的线位移误差的影响,采用一种基于三维模型的数字化方法对这些几何误差进行分析。通过参考坐标系和齐次变换矩阵建立二维直线运动平台几何误差运动学模型,并基于误差模型对运动平台的各项几何误差进行分配、计算和合成。基于以上误差分配原则对运动平台使用的导轨提出形位公差要求。通过上述工作,在虚拟样机设计阶段能对所设计结构几何误差进行预测,为后续精密运动的设计提供可靠的参考。     

Connecting parameters optimization on unsymmetrical twin-tower structure linked by sky-bridge

Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge, the frequency response functions, the displacement power spectral density （PSD） functions, and the time-averaged total vibration energy were derived, by assuming the white noise as the earthquake excitation. The effects of connecting parameters, such as linking stiffness ratio and linking damping ratio, on the structural vibration responses were then studied, and the optimal connecting parameters were obtained to minimize the vibration energy of either the independent monomer tower or the integral structure. The influences of sky-bridge elevation position on the optimal connecting parameters were also discussed. Finally, the distribution characteristics of the top displacement PSD and the structural responses, excited by El Centro, Taft and artificial waves, were compared in both frequency and time domain. It is found that the connecting parameters at either end of connection interactively affect the responses of the towers. The optimal connecting parameters can greatly improve the damping connections on their seismic reduction effectiveness, but are unable to reduce the seismic responses of the towers to the best extent simultaneously. It is also indicated that the optimal connecting parameters derived from the simplified 3-DOF model are applicable for two multi-story structures linked by a sky-bridge with dampers. The seismic reduction effectiveness obtained varies from 0.3 to 1.0 with different sky-bridge mass ratio. The displacement responses of the example structures are reduced by approximately 22% with sky-bridge connections.     

高职院校绩效工资制度存在的问题及对策——以武汉某职院人事分配制度为背景

为了最大程度地调动教职工的积极性和创造性,提高办学质量和办学效率,高职院校纷纷进行人事分配制度改革。由于高职院校存在着教师教育教学活动的投入难以可靠计量、教育教学活动的产出难以可靠测量以及教学效果难以可靠评估等特殊性,导致高校绩效工资制度的改革难以达到"效率优先,兼顾公平"的预期效果。本文以武汉某职院人事分配制度的改革方案为背景,由个别到一般,分析高职院校绩效工资改革存在的不足,并就如何进一步优化高职院校绩效工资制度改革提出意见和建议。     

Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments

This paper presents a new model for simultaneous diffusion and precipitation of chemical elements in metallic matrices, a scheme for its numerical solution, and several applications to problems of internal oxidation. The model basically stands as an extension of the classical Wagner model for internal oxidation of steels, but is more much general in that it allows for an arbitrary number of diffusing chemical elements, an arbitrary number of precipitate phases with arbitrary compositions, dependence of diffusion coefficients and solubility products upon (time-dependent) temperature, etc., thus allowing for a much broader range of applications. As a counterpart, it is generally impossible to solve the complex, non-linear equations of the model analytically, but this can be done numerically. The simple but efficient numerical scheme proposed is based on explicit 1D finite differences. Experience has shown that this scheme, in spite of its rusticity and the restrictions it imposes on the time-step, is more efficient than more elaborate strategies based on the finite-element method. The applications presented are concerned with internal oxidation of steels during annealing processes. The model and associated numerical scheme allow for evaluation of the amounts of the various oxide precipitates in the external layer of the sheet. This opens the way, through numerical parametric studies of the influence of the process parameters and the chemical composition, to the improvement of existing treatments and the development of new steel grades.     

Sensitivity analysis based preform die shape design using the finite element method

This paper uses a finite element-based sensitivity analysis method to design the preform die shape for metal forming processes. The sensitivity analysis was developed using the rigid visco-plastic finite element method. The preform die shapes are represented by cubic B-spline curves. The control points or coefficients of the B-spline are used as the design variables. The optimization problem is to minimize the difference between the realized and the desired final forging shapes. The sensitivity analysis includes the sensitivities of the objective function, nodal coordinates, and nodal velocities with respect to the design variables. The remeshing procedure and the interpolation/transfer of the history/dependent parameters are considered. An adjustment of the volume loss resulting from the finite element analysis is used to make the workpiece volume consistent in each optimization iteration and improve the optimization convergence. In addition, a technique for dealing with fold-over defects during the forming simulation is employed in order to continue the optimization procedures of the preform die shape design. The method developed in this paper is used to design the preform die shape for both plane strain and axisymmetric deformations with shaped cavities. The analysis shows that satisfactory final forging shapes are obtained using the optimized preform die shapes.     

Special-shaped tube drawing forming and conformal optimization of die cavity

Aiming at the issues in quick processing and modeling design of drawing special-shaped tube die, by Conformal Mapping Theory and the numerical trigonometry method of interpolation between odd points and even points, the conformal mapping function is obtained. As the result, three-dimension drawing forming were converted into that of two-dimension problems, and the plastic stream function was analyzed, die cavity modeling and its optimized function were set up. Combining with modern processing technology, NC program and CAM of die cavity can be realized. Taking the drawing forming of hexagon tube with arc radii r and ellipse-shaped tube as instances, the drawing die cavity optimization of special-shaped tube was achieved, as well as, the changing principle of wall thickness was analyzed.