Nanostructured alumina as seed protectant against three stored-product insect pests

Nanoparticles represent a promising technology to enhance the efficacy of bioactive materials and a large number of studies showed the effectiveness of nanostructured materials against various arthropod species of economic importance. In this work nanostructured alumina (NSA) was prepared using sol-gel method and the effect of NSA was evaluated as seed protectant against the main seed-infesting insect pests Oryzaephilus surinamensis (L.) (Coleoptera: Silvanidae) Stegobium paniceum (L.) (Coleoptera: Anobiidae), and Tribolium confusum Jacquelin du Val (Coleoptera: Tenebrionidae). Besides, we tested the effects of NSA on seed germination and plant growth and finally, we assessed the presence of NSA as a contaminant in the leaves of bean plants germinated from NSA-treated seeds. The results showed significant insecticidal activity of NSA against the three tested species. After sixteen days, the percentage of insect mortality at the highest NSA concentration tested (400 mg kg⁻¹) was 100.00% for S. paniceum followed by O. surinamensis (80.64%) and T. confusum (79.41%). Besides, in-vitro tests indicated that NSA has no effects on seeds germination and on radicle and shoot elongation. No effects of NSA were also observed in pot tests on the bean’s plants. No differences were recorded in the leaves area, stoma density and roots length. On the contrary, the shoot of plants from NSA-treated beans was about 66% higher than the one of the non-treated plants (shoot, 15.07 cm for the control and 22.76 cm for NSA-treated plants). Finally, no contamination by alumina particles was found by EDX-system coupled with Scanning Electron Microscopy (SEM) on the surface of the P. vulgaris leaves obtained from NSA-treated beans. Overall, the results showed that NSA could be an effective protective agent for the control insect pests during the seeds storage.     

对组合式3D机织复合材料纵向拉伸性能的研究

设计并在一般剑杆织机上试织7种不同结构的组合式3D预制件,采用真空辅助成型工艺分别制作这7种复合材料,同时测试各种试样的拉伸性能.在增强体经向截面上经纱总根数（包括垂纱）相同的情况下,研究了试样的结构、结构单元及纬纱层数对材料纵向拉伸性能的影响.     

新型天然色素提取设备--滑槽式浸出器

介绍了一种新型天然色素提取设备———滑槽式浸出器,它为双层喷淋式、低料位结构,不损坏物料且使物料翻动1次。适合于天然色素的提取,提取率大于99%,比平转式浸出器提高8%。     

溶胶-凝胶法制备的纳米In2O3气敏性能研究

以氯化铟为前驱体 ,通过溶胶 -凝胶法制备了纳米In2 O3 颗粒 .经TG -DSC热分析表明 :In(OH) 3 在 2 72 9℃附近脱水形成In2 O3 .经XRD ,TEM等手段表征的结果显示 :所合成的纳米In2 O3属立方晶型 ,晶粒尺寸约 2 0nm .气敏性能测试结果表明 :纳米In2 O3 气敏元件对TMA及NH3 灵敏度高 .通过与某公司提供的粒度为 3.0 77μm的In2 O3 制成的气敏元件比较得知 ,纳米In2 O3 气敏元件对TMA的灵敏度提高特别明显 .     

Oxidation of graphene-modified HfB2-SiC ceramics by supersonic dissociated air flow

The oxidation resistance of ultra-high-temperature ceramic material (HfB₂-30 vol%SiC)-2 vol%rGO (rGO: reduced graphene oxide) under long-term exposure (2000s) to a supersonic air flow has been studied. The ceramics were obtained by reactive hot pressing of HfB₂-(SiO₂-C)-rGO composite powder at a temperature of 1800°C (pressure 30 MPa, holding time 15 min, Ar). The surface temperature of graphene-modified ceramics under the influence of heating by high-enthalpy air flow (heat flow q reached 779 W·cm^–2) did not exceed 1700°C, which is 650–700°C less than for the HfB₂-30 vol%SiC baseline ceramics. This may be related to an increase in the efficiency of heat transfer from the sample to the water-cooled module, due to the higher thermal conductivity of the rGO-containing material. Thereby, a decrease in the material degradation degree has been noted, i.e. decrease in the recession rate and decrease in the total thickness of the oxidised ceramic layer by tenth. The peculiarities of the oxidised surface and near-surface region microstructure upon aerodynamic heating of the graphene-modified ceramic material, have been shown.     

Impact of oxygen concentration during the deposition of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD Zn(S,O) based solar cell

The purpose of the present paper is to focus on the impact of oxygen gas partial pressure during the sputtering of i‐ZnO and ZnMgO on the transient behavior of Cu(In,Ga)Se₂ (CIGSe) based solar cells parameters when a CBD‐Zn(S,O) buffer layer is used. Based on electrical characterization of cells, it is observed that the effect of light soaking is different on J–V characteristics depending on whether oxygen is or is not present during the first deposition time of the i‐ZnO or ZnMgO layers. In fact, when cells are prepared with standard i‐ZnO, the efficiencies are very low and a pronounced transient behavior is observed. However, when the first 10 nm of i‐ZnO or ZnMgO is formed by sputtered layer without adding oxygen during the process, depending on the thickness of the buffer layer, the transient effects strongly decreases. It is then possible to get stable cells reaching efficiencies quite similar to the CdS reference cells, especially with ZnMgO, without any post‐treatments. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and electrochemical properties of Li[Li0.07Ni0.1Co0.6Mn0.23]O2 as a possible cathode material for lithium-ion batteries

The layered Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ materials were synthesized by sol-gel method with glycine or citric acid as chelating agent. The prepared materials were characterized by means of XRD, SEM and Raman spectroscopy. Li/Li[Li_0.07Ni_0.1Co_0.6Mn_0.23]O₂ cells were assembled and subjected to charge-discharge studies at different C rates, viz 0.2, 1, 2 and 4 C. Although the samples showed less discharge capacity at 4 C rate the fade in capacity per cycle is lesser than that of capacity fade at 0.2 C rate. The citric acid assisted sample is found to be superior in terms of discharge capacity, capacity retention rate and also in thermal stability to that of sample prepared with glycine as chelating agent.     

录井资料在识别低电阻率油层中的应用

低电阻率油层因其储层电阻率偏低及测井响应特征不明显,因此用常规方法识别油水层难度较大.地质录井的基本任务是取全取准各项资料、数据,为油气田的勘探和开发提供可靠的第一手资料,录井技术的发展使得其资料得到更广泛的应用.应用实例证明,录井资料在评价、识别低电阻油层中也能起到较好的效果,是识别低阻油层的有效方法之一.     

Modification of TiAlV Alloys with Hybrid Layers Containing Metallic Nanoparticles Obtained by the Sol–Gel Method: Surface and Structural Properties

The aim of the work was to obtain hybrid coatings containing silver, copper, and zinc nanoparticles on the TiAlV medical alloy via a sol–gel process. The developed layers were designed to bring about a bactericidal and fungicidal effect, as well as for protection against surgical scratches during the implantation of implants used in veterinary medicine. In this work, the authors focused on evaluating the microstructure (SEM + EDS); the structure (XRD, FTIR); and the surface properties, such as wettability, free surface energy, and roughness of layers with various concentrations of metallic nanoparticles (2 and 5 mol %). Our results confirmed that the sol–gel method enables the easy manufacturing of hybrid layers endowed with different porosity values as well as various shapes and sizes of metallic nanoparticles. A higher concentration of nanoparticles was observed on the surface containing 5 mol % of metallic salts. The highest degree of homogeneity was obtained for the layers containing silver nanoparticles. In addition, the silver nanoparticles were round and had the smallest dimensions, even below 20 nm. The FTIR and XRD structural studies confirmed the presence of an organosilicon matrix containing all three types of the metallic particles. We conclude that the higher concentration of nanoparticles influenced the alloy surface parameters.     

Evaluation of tensile load-strain characteristics of geogrids through in-soil tensile tests

This paper evaluates in-soil tensile load-strain characteristics of geogrids with the help of a custom designed and developed in-soil tensile setup in the laboratory. Displacement controlled in-soil tensile tests were carried out to evaluate the effect of normal stress, soil type, and presence of sand-sandwiched layer, on the tensile load-strain characteristics of geogrid. Confinement of geogrid within the soil and application of normal stress were found to increase the mobilized tensile load and secant tensile stiffness of geogrid. Secant stiffness improvement factors were determined to quantify the improvement in tensile load-strain characteristics of geogrid under confinement, on comparison to in-isolation values. Geogrid was observed to exhibit lower secant tensile stiffness when embedded in marginal soil, moist-compacted at wet of optimum. However, the concept of sand-sandwiched geogrid was found to improve the tensile load-strain behaviour of geogrids embedded in marginal soil compacted at wet of optimum.