The mechanical property and phase structures of wheat proteins/polyvinyl alcohol blends studied by high-resolution solid-state NMR

The phase structures of thermally processed wheat proteins (WP) and polyvinyl alcohol (PVOH) blends were studied by solid-state high-resolution NMR spectroscopy. The intermolecular interactions among the multi-component systems and the behavior of each component in the blends on scales of nanometers were examined. The mechanical properties of the blends were also measured and related to the phase structure studies. The results indicated that the polymer chains of WP could be homogeneously mobilized when thermally processed with glycerol and water as plasticisers, but the glycerol predominately associated with WP rather than PVOH in the blends. The intermolecular hydrogen bonding interactions between WP and PVOH caused some extent of miscibility in the system on scales of nanometers especially when the PVOH content was low. The tensile strength and modulus of the blends were improved as compared to WP. However, the intermolecular interactions were relatively weak and could not be further enhanced by increasing PVOH component in the blends. The particle miscible WP/PVOH blends contained plasticised WP and PVOH phases in conjunction with the miscible WP/PVOH phase. Increasing the PVOH content in the blends did not result in an increase of the percentage of the miscible phase and the blends tented to be immiscible while the elongation of the blends was reduced when increasing the PVOH content in the blends.     

Solid-state NMR study of N labelled polyaniline upon reaction with DPPH

The quantitative investigation of the radical scavenging properties of polyaniline (PANI) upon reaction with excess of the stable DPPH radical (a 4:1 ratio of DPPH to aniline units in the polymer) was carried out using ¹⁵N and ¹³C solid state NMR spectroscopy. During the process the polyaniline was oxidised so that the imine content increased from 45 to 65%. The extent of oxidation measured by NMR was confirmed by N1s XPS analysis. However, within a 30 min reaction time, about 85% of the DPPH radicals were scavenged as monitored by the decay in its EPR signal. This is about 20 times greater than the fraction of DPPH required to oxidize PANI from an imine content of 45-65%. An identification of further redox processes is required to explain the high degree of radical scavenging. At the same time, there was no evidence of significant chemical binding or trapping of DPPH in the PANI structure.     

Cuticular hydrocarbons ofReticulitermes virginicus (Banks) and their role as potential species- and caste-recognition cues

The cuticular hydrocarbon components of four castes ofReticulitermes virginicus (Banks) have been identified and quantitated. Components identified includen-alkanes; 2-, 3-, 11-, 13-, and 15-methyl-alkanes; 11,15-dimethylalkanes, (Z)-9-alkenes; (Z,Z)-7,9-dienes; and (E/Z)-6,9-dienes ranging in carbon number from C₂₁ to C₄₀. All caste forms ofR.virginicus contained the same components, but showed caste-specific proportions. Comparison of these hydrocarbons with those of the sympatric termiteR. flavipes (Kollar) suggest that cuticular hydrocarbons might serve as species- and caste-recognition cues. A bioassay was developed to test this species-recognition hypothesis, with the experimental results supporting the hypothesis.Isoptera: Rhinotermitidae.     

Preparation of nanosize Pt clusters using ion exchange of Pt(NH3) 4 2+ inside mesoporous channel of MCM-41

Mesoporous molecular sieve MCM-41 with a Si/Al ratio of 35 was obtained by hydrothermal synthesis using a gel mixture with a molar composition of 6 SiO₂0.1 Al₂O₃1 hexadecyltrimethylammonium chloride 0.25 dodecyltrimethylammonium bromide 0.25 tetrapropylammonium bromide0.15 (NH₄)₂O1.5 Na₂O300 H₂O. The MCM-41 sample was calcined in O₂ flow at 813 K and subsequently ion exchanged with Ca²⁺. A small Pt cluster has been supported on the MCM-41 sample following a procedure using ion exchange of Pt(NH₃) ₄ ²⁺ . The Pt(NH₃) ₄ ²⁺ ion supported on MCM-41 has been activated in O₂ flow at 593 K and subsequently reduced with Fh flow at 573 K, in the same way used for the preparation of a Pt cluster entrapped inside the supercage of zeolite NaY. The resulting Pt cluster supported on the MCM-41 shows hydrogen chemisorption oftotal two H atoms per Pt at 296 K (based on the total amount of Pt) and high catalytic activity for hydrogenolysis of ethane. The chemical shift in¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the Pt cluster is located inside the mesoporous molecular sieve.     

Nucleation of isolated PO4 units on CeO2 driven by high temperatures and the effect on its oxygen storage and release properties

The chemical nature of P-containing species of varying concentration present in CeO₂ after impregnation with (NH₄)₂HPO₄ and calcination at 1273 K, and their effects on the oxygen storage and release (OSR) properties of ceria are reported for the first time. The samples were characterized by different techniques and the results were compared with those recently reported on the same samples but calcined at 873 K. When P-containing ceria solids were calcined at 1273 K, CePO₄ (monazite) was the predominant P-containing species on the surface of ceria, confirming previous studies that showed that monazite exists for those samples in which the surface P loading (P atoms per nm⁻²) is larger than 5.5. For lower surface P concentrations, isolated orthophosphate units are present at the surface and within the subsurface region of the solid. Severe sintering of CeO₂ after calcination at 1273 K resulted in P concentrations >5.5 P atoms·nm⁻² in all samples. Isolated PO₄ units that could initially be present in the samples calcined at 873 K nucleated and CePO₄ was formed when samples were calcined at 1273 K. OSR properties of CeO₂ deteriorated progressively when P loading increased due to the presence of larger crystals of the very stable Ce(III) phase of CePO₄ at the surface of the P-containing ceria solids.     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Study of alinite cement hydration by impedance spectroscopy

Two types of alinite cements, Mg-alinite and Zn-alinite, were synthesized using the reagent grade chemicals. Their hydration behavior was compared with ordinary Portland cement (OPC) using impedance spectroscopy (IS) and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy. The bulk resistance in the IS spectra and the intensity ratio of the hydrous (Q₁ and Q₂) to anhydrous (Q₀) phases in the NMR spectra were estimated as the extent of hydration. The results obtained from both techniques were consistent each other. Mg-alinite had a comparable hydration rate to OPC and Zn-alinite exhibited faster hydration kinetics than Mg-alinite.     

Compositional analysis of biodegradable polyphosphoester copolymers using nmr spectroscopic methods

The chemical composition and quantitative molar ratios among all components of biodegradable polyphosphoester copolymers of DL ‐lactide and ethylphosphate were determined by a comprehensive set of NMR spectroscopic methods. The polyphosphoester copolymers studied were synthesized using condensation polymerization of oligomeric DL ‐lactide prepolymers and ethyl dichlorophosphate. Conclusive identification of the chemical shift patterns of all functional groups in the copolymers required additional NMR methods such as ³¹P‐NMR and two‐dimensional ¹H–¹H COSY NMR, in addition to the synthesis and comparative NMR analysis of model compounds possessing identical phosphoester linkages in the polyphosphoester copolymers. For the polymers synthesized using the bulk polycondensation process, ¹H–¹H COSY NMR analysis revealed the presence of a small amount of side products that were undetected by ¹H‐NMR alone. These side reactions most likely occurred between the pendant ethoxy group of the phosphoesters and the hydrogen chloride gas generated in the bulk polycondensation process. ³¹P‐NMR spectra of the copolymers revealed a consistent triple‐peak pattern characteristic of phosphoesters linked to a racemic mixture of D,L ‐lactides. These results offered new insight into the side reactions occurring in bulk polymerization of polyphosphoesters and provided a powerful tool of characterizing complex biodegradable polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4021–4031, 2003     

聚天冬氨酸的合成与表征

介绍了以L -天冬氨酸为原料 ,热缩合成聚天冬氨酸酐 ,水解得到聚天冬氨酸的合成工艺。采用凝胶色谱法测定了聚天冬氨酸的分子量 ,并用核磁共振对其进行了表征。