新型无石棉摩阻材料用增强纤维研究进展

综述了近几年无石棉摩阻材料用增强纤维研究进展,介绍了摩阻材料在使用过程中的摩擦磨损机制,重点介绍了新型无石棉摩阻材料用增强纤维的研究成果。     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

超高分子量聚乙烯纤维/有机玻璃复合材料摩擦磨损性能研究

用真空浸渍法成功制备出了超高分子量聚乙烯纤维／有机玻璃(UHMWPE／PMMA)复合材料，并对基体材料PMMA，单向超高分子量聚乙烯纤雏／有机玻璃复合材料以及三维编织超高分子量聚乙烯纤维／有机玻璃(即UHMWPE3D／PMMA)复合材料的摩擦磨损性能进行了研究。实验证明UHMWPE／PMMA复合材料具有优良的摩擦磨损性能。经过纤维增强的复合材料的摩擦磨损性能优于基体材料，三维编织纤维增强的复合材料其磨损远小于单向纤维增强的复合材料，但其摩擦系数没有显著变化。     

几种工程塑料摩擦磨损性能的分析与比较

对聚甲醛，尼龙1010和聚四氟乙烯三种工程塑料的摩擦磨损性能进行了测试，分析和比较了它们不同截荷及不同对磨时间的摩擦磨损性能。     

Cooperative adsorption behavior of fatty acid methyl esters from hexadecane <Emphasis Type="Italic">via</Emphasis> coefficient of friction measurements

The frictional behaviors of methyl oleate (MO), methyl palmitate (MP), methyl laurate (ML), and methyl stearate (MSt) as additives in hexadecane have been examined in a boundary lubrication test regime using steel contacts. It was found that the transient attributes of coefficient of friction (COF)-time spectra are a sensitive measure of adsorption equilibria. Critical additive concentrations were defined and used to perform novel and simple Langmuir analyses that provide an order of adsoprtion energies: MSt>MP>MO≥ML. Application of Langmuir, Temkin, and Frumkin-Fowler-Guggenheim adsorption models via nonlinear fitting of a general cooperative model demonstrates the necessary inclusion of cooperative effects in the applied model. In agreement with the qualitative features of steady-state COF-concentration plots, MSt modeling requires minimal cooperative interaction terms. However, MO, MP, and ML data require large attractive interaction terms to be adequately fitted. Primary adsorption energies calculated via the cooperative model are necessarily decreased, whereas total adsorption energies correlate well with values obtained via critical concentration analyses. These results and comparisons with previous adsorption studies of MO and MSt suggest that primary (ester-surface) and secondary (alkyl-surface) adsorbate-adsorbent, adsorbate-adsorbare, and (free-additive) adsorpt-adsorpt interactions collectively determine both the calculated primary and the cooperative interaction energies.     

聚氨酯橡胶摩擦轮有限元及疲劳寿命分析

针对汽车滑板输送机聚氨酯橡胶摩擦轮的开裂问题,对摩擦轮与滑板之间的相互作用进行预压紧力和接触摩擦驱动有限元分析,获得摩擦轮的应力和变形分布等结果.在获得摩擦轮周向应力分布的基础上,根据疲劳裂纹扩展公式对聚氨酯橡胶部分进行疲劳寿命分析,验证是否满足设计要求.分析过程和结果能为聚氨酯橡胶摩擦轮的详细设计提供参考.     

重塑黄土与植物根系界面摩擦离散元分析

油松作为一种植根于黄土地区的常见植物,在提高黄土强度方面起重要作用。为了弄清油松根系在黄土地区的固土效应,本文采用离散单元法(Distinct Element Method)模拟根系拉拔试验,分析了法向压力、根系埋深、含水率对根-黄土界面摩擦力学特性的影响。结果表明:拉拔试验中,根-黄土界面峰值强度、残余强度随着法向力的增大而增大;峰值强度、残余强度随着根系埋深的增加而增大;随着含水率的降低,根-黄土界面峰值强度、残余强度呈增大的趋势。     

摩擦材料研究进展

对摩擦材料国内外发展现状进行了综述，简要叙述了摩擦材料的发展历史，以及各种摩擦材料的性能以及应用，阐述了它们的优缺点，说明了纤维在摩擦材料中的重要作用。同时指出陶瓷基复合摩擦材料是今后发展的趋势。