SURFACE ROUGHNESS OF SPUTTERED SILICON. II. MODEL VERIFICATION

Experimental verification of the mathematical surface roughness model for sputtered silicon was performed. The beam shape and its significant level of intensity were determined first by measuring the topography of craters sputtered by focused ion beam (FIB). Then the beam function was generated for various combinations of beam parameters. The material function was developed both by theoretical and experimental analysis. These two functions were then used in the model to calculate the theoretical surface roughness. Microsurface analysis was formed by FIB sputtering of a (100) silicon wafer. The surface roughness at the bottom of the sputtered features was then measured using an atomic force microscope. The theoretical surface roughness was found to be within ±1 and ±5 nm of the measured surface roughness with the measurement uncertainty (standard deviation) of about ±0.36 and ±0.85 nm for R_a and R_t, respectively.     

Application of the Extended Langmuir Model for the Determination of Lyophobicity of 1-Propanol in Acetonitrile

Surface tensions (σ) of binary liquid mixtures of acetonitrile (ACN) with 1-propanol (PrOH) were measured over the entire composition range at eight different temperatures, 278.15 K, 283.15 K, 288.15 K, 293.15 K, 298.15 K, 303.15 K, 308.15 K, and 313.15 K. The lyophobicities (β) of the surfactant PrOH relative to that of ACN as well as the surface mole fractions () of PrOH at various temperatures were derived using the extended Langmuir model (Langmuir 17, 4261, 2001). The β values indicate the greater affinity of PrOH for the surface, and this trend slightly increases with rising temperature. The determined values indicate that the surface concentration of PrOH is always higher than its bulk concentration and consequently confirm that the surface is enriched with PrOH.     

The Potential Role of SP-G as Surface Tension Regulator in Tear Film: From Molecular Simulations to Experimental Observations

The ocular surface is in constant interaction with the environment and with numerous pathogens. Therefore, complex mechanisms such as a stable tear film and local immune defense mechanisms are required to protect the eye. This study describes the detection, characterization, and putative role of surfactant protein G (SP-G/SFTA2) with respect to wound healing and surface activity. Bioinformatic, biochemical, and immunological methods were combined to elucidate the role of SP-G in tear film. The results show the presence of SP-G in ocular surface tissues and tear film (TF). Increased expression of SP-G was demonstrated in TF of patients with dry eye disease (DED). Addition of recombinant SP-G in combination with lipids led to an accelerated wound healing of human corneal cells as well as to a reduction of TF surface tension. Molecular modeling of TF suggest that SP-G may regulate tear film surface tension and improve its stability through specific interactions with lipids components of the tear film. In conclusion, SP-G is an ocular surface protein with putative wound healing properties that can also reduce the surface tension of the tear film.     

P波空间斜入射下沥青混凝土面板堆石坝响应特性及面板破坏评价

地震波入射方位和斜入射角度对于沥青混凝土面板堆石坝地震响应结果有着显著影响。本文从地震动传播机制出发,基于波场叠加原理,推导了P波以任意入射方位角和斜入射角空间斜入射下弹性半空间自由场计算公式,建立了P波空间斜入射波动输入模型。以不同应变率下的沥青混凝土单轴动态拉伸试验结果为基础,提出了考虑抗拉强度随应变率实时变化的沥青混凝土面板破坏评价方法。考虑16种不同入射方位角和斜入射角下的P波空间斜入射工况,从面板应力和加速度两方面分析了入射方位角和斜入射角对某实际沥青混凝土面板地震响应特性的影响,并进行了沥青混凝土面板的抗拉破坏评价,分析了静态评价方法与动态评价方法的差异。结果表明,所建立的P波空间斜入射波动输入模型能够准确模拟半空间自由场,波动输入数值解与解析解符合良好;与垂直输入射相比,面板顺水流向、垂直水流向加速度峰值最大分别增加135.9%和92.7%,竖向加速度峰值最大减少68.3%;空间斜输入导致面板动应力增大,主拉应力和主压应力最大分别增加3.6倍和2.7倍,忽略入射方位角和斜入射角可能会严重低估面板的地震响应。传统将静态强度提高30%作为动态强度的面板抗拉破坏判别方法过于严格,本文提出的考虑应变率效应的沥青混凝土面板破坏评价方法较为符合实际。     

传动带成型机张力控制系统的优化设计

通过对传动带成型机张力控制系统的控制方案进行比较与分析,优化设计了以单片机为核心、以磁粉制动器为执行元件的恒张力控制系统。该张力控制系统采用智能调节,能进行参数修改、调节变频器加减速曲线及时间常数,可防止卷绕物拉断,具有在线监视、通讯功能,系统操作方便、直观,排线间距控制精度较高,能大幅度提高传动带成品率,具有推广应用价值。     

微系统技术（连载六）─性能与测试

简要介绍了利用新型干涉仪测量微机械零件表面粗糙度的原理和方法，加载结构动摩擦系数测量，微系统器件残余应力分析和半导体器件表面电位测量。     

基于微结构的光谱特征控制技术

制导武器的发展,对目标的隐身以及多波段隐身提出了更高的要求.提出了通过控制目标表面的微结构来控制目标表面光谱特性的一种新技术.利用麦克斯韦电磁场理论,建立了表面微结构与表面光谱特性关系的理论模型,研究了不同材料以及材料表面微结构对光谱特征的影响,并对微结构光谱特征控制技术在红外隐身中应用的可能性进行了分析.研究结果表明:通过控制目标表面的微结构,可以达到控制目标光谱特征的目的,实现目标的红外隐身,为目标的隐身设计提供了一种新思路.     

智能超表面辅助低轨卫星通信技术综述

卫星通信能够提供超视距、大容量的通信服务,但在城市区域、峡谷森林等视线受遮蔽严重的区域,会出现视距衰落严重、多径效应显著等问题,影响通信质量。近年来出现的智能超表面(RIS)可以通过动态控制反射单元的电磁性质,构建可控电磁环境,为改善低轨(LEO)卫星通信质量提供新的思路。本文基于RIS基本原理与优势,对RIS用于LEO卫星通信中信道建模、信道估计、波束成形等关键技术进行探讨,最后分析了目前RIS在实际应用中面临的主要挑战,以期为LEO卫星场景下的RIS研究提供参考。     

环锭纺的发展潜力

目前存在3个关键因素导致环锭纺产量无法进一步提高。介绍了一些有利于未来环锭纺技术进一步发展的基本情况。详细分析了环锭纺工序中的能耗问题,这是性能能否提高的基础。环锭纺产量的提高,不仅是技术上是否可行的问题,更重要的是能够获得良好的经济效益。     

无碱低张力泡沫复合驱油体系室内试验研究

研究了不同种类表面活性剂复配后的泡沫性能、界面性能,筛选出了性能高效、界面张力超低的无碱高效泡沫驱油体系的配方．该体系具有抗老化能力好、耐温抗盐能力强的优点。在油藏条件下．利用物理模拟装置。研究了体系的封堵能力和驱油效果。结果表明：超低界面张力泡沫复合驱体系具有在聚合物驱后较大幅度提高原油采收率的潜力,是一种比较好三次采油新方法。