Effect of the cooling rate in the corrosion behavior of a hot worked Ti-6Al-4V extra-low interstitial alloy

This work discusses the effect of the cooling rate during a forging process on the microstructure and corrosion behavior of a Ti–6Al–4V extra-low interstitial (ELI) alloy, which is commonly used as biomaterial. The samples were hot forged at two different temperatures, both of them within the dual phase field (α + β) and a constant strain rate of 4 × 10⁻³ s⁻¹ was employed during the tests. The samples were cooled in three different cooling media (water, air and clay) and the microstructure was analyzed using scanning electron microscopy (SEM). The corrosion resistance was determined by cyclic polarization tests in Ringer’s solution at 37 °C. Comparison between the results obtained for forged and commercial samples allowed to establish some correlations between cooling rate, microstructure and corrosion resistance. It was found that the clay as a cooling medium is a good candidate to obtain a proper microstructure and properties for biomedical applications, eliminating the requirement of subsequent heat treatment and reducing costs.     

Synthesis,structure and optical properties of x(CuO)/(1−x)Ni(OH)2 [x=0, 0.1 and 0.3] nanocomposites

The x(CuO)/(1−x)Ni(OH)₂ [x=0, 0.1 and 0.3] nanocomposites were prepared by the hydrothermal method in the presence of the surfactant polyethylenglycol-10000 (PEG-10000). X-ray diffraction (XRD), infrared (IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the as-prepared samples. The increase of the CuO content led to the increase of the crystallite size of both, the β-Ni(OH)₂ and the CuO. The increase in the crystallite size greatly affects the band gap energy of the as-prepared nanocomposites. The band gap energies of the x(CuO)/(1−x)Ni(OH)₂ nanocomposites were estimated by UV–vis spectroscopic method. UV–vis spectroscopic results showed an apparent decrease in the direct band gap energies. The x(CuO)/(1−x)Ni(OH)₂ [x=0, 0.1 and 0.3] nanocomposites show low band gap energies compared to the Ni(OH)₂ bulk materials. The enhanced optical properties lead to their possible use in photocatalytic and photovoltaic applications.     

Effect of annealing on the structure and magnetic properties of CoFe2O4:SiO2 nanocomposites

The decomposition of succinate type precursors obtained by a modified sol-gel method using cobalt and iron nitrates, 1,4-butanediol and tetraethylorthosilicate, followed by the formation of single phase cobalt ferrite embedded in the silica matrix by annealing at 400–1100 °C was studied. The thermal analysis indicated the formation temperature of succinate type precursors, while the Fourier transform infrared spectroscopy (FT-IR) data confirmed the formation of the precursors in the pores of silica matrix. The formation of CoFe₂O₄ was investigated by X-ray diffraction and FT-IR, the size and shape of the nanoparticles by transmission electron microscopy, while the resulted microstructures by scanning electron microscopy. The crystallinity and crystallites size increased with the annealing temperature. The hysteresis loops revealed a direct relationship between annealing temperature and saturation magnetization in constant coercive field. The particle size of ferrite powders is critically dependent on the annealing temperature.     

Binder-free graphene/carbon nanotube/silicon hybrid grid as freestanding anode for high capacity lithium ion batteries

Light-weight graphene/Si (G/Si) hybrid binder-free electrode is deemed a high energy density anode contender for lithium ion batteries (LIBs). However, paper-like G/Si electrodes tend to show an increased migration distance for Li⁺ through the fast interlayer channel with the increment of electrode size, in addition to an intrinsically slow diffusion kinetics; thereby encumbering their commercial realisation in high energy density and long life LIBs. To address these problems, herein, sandwich-structured graphene/carbon nanotube/silicon (G/CNT/Si, Si: 56 wt.%, ∼500 nm) hybrid grid is designed, cognizant of its uniform and shorter Li⁺ migration distance. Cyclic voltammograms indicate G/CNT/Si paper and grid anode to exhibit good electrochemical activity at both low and high temperatures. Noteworthy is that the Li⁺ diffusion coefficient ratio between G/CNT/Si grid and paper anodes are 1.82, 1.64, 1.43, 1.36 and 1.53 at a temperature of −5, 10, 25, 40 and 55 °C, respectively. The initial coulombic efficiencies of both paper and grid anode are as high as ∼82%. After 60 cycles at 420 mA g⁻¹, the charge capacity of G/CNT/Si grid is retained at 808 mA h g⁻¹, which by far surpasses that of paper anode (i.e., 490 mA h g⁻¹). The attained lithium ion storage performance at both high and low temperatures, underpins the G/CNT/Si sandwiched grid as effective to realise the practical deployment of paper-like graphene electrodes for high energy density and long life LIBs.     

Effect of carbon nanotube waviness on the effective thermoelastic properties of a novel continuous fuzzy fiber reinforced composite

This paper deals with the investigation of the effect of carbon nanotube (CNT) waviness on the effective coefficient of thermal expansion (CTE) of a novel continuous fuzzy fiber reinforced composite (FFRC). This novel FFRC is composed of carbon fibers, sinusoidally wavy CNTs and epoxy matrix. The sinusoidally wavy CNTs are radially grown on the circumferential surfaces of the carbon fibers. Analytical micromechanics model based on the method of cells (MOC) approach is derived to investigate the influence of the waviness of CNTs on the effective CTEs of the FFRC. The present study reveals that if the amplitudes of the radially grown sinusoidally wavy CNTs are parallel to the axis of the carbon fiber then the thermoelastic properties of the FFRC are significantly improved over those of the FFRC being composed of straight CNTs.     

Elaboration and properties of novel biobased nanocomposites with halloysite nanotubes and thermoplastic polyurethane from dimerized fatty acids

Nanocomposites of biobased thermoplastic polyurethane (TPU) from dimer fatty acids and halloysite nanotubes (HNT) were elaborated by different melt processing routes such as direct mixing (1 step process) and masterbatch/dilution (2 steps process), at different temperatures (150 and 180 °C). Rheological and transmission electron microscopy (TEM) analyses indicated that the HNT distribution and dispersion were dependent on the processing conditions: the 2 steps process produced well dispersed nanocomposites and the masterbatch dilution at 180 °C improved the HNT distribution through the TPU. Consequently, a high reinforcement was achieved, with a 40% increase in the elastic modulus and 8 °C increase in the relaxation temperature related to the glass transition of the TPU soft segments. Furthermore, a percolated network was attained, even if a large extent of HNT breaking was observed during processing, suggesting that a synergistic effect between the HNT particles and the TPU's hard segments in the molten state occurred. Thus, HNT nanotubes can be seen as highly reinforcing nanofillers when good dispersion and distribution are achieved through the polymeric matrix.     

Fatigue behaviour of nanoclay reinforced epoxy resin composites

Nanoparticle filling is a feasible way to increase the mechanical properties of polymer matrices. Abundant research work has been published in the last number of years concerning the enhancement of the mechanical properties of nanoparticle filled polymers, but only a reduced number of studies have been done focusing on the fatigue behaviour. This work analyses the influence of nanoclay reinforcement and water presence on the fatigue behaviour of epoxy matrices. The nanoparticles were dispersed into the epoxy resin using a direct mixing method. The dispersion and exfoliation of nanoparticles was characterised by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Fatigue strength decreased with the nanoclay incorporation into the matrix. Fatigue life of nanoclay filled composites was significantly reduced by the notch effect and by the immersion in water.     

Microwave Hydrothermally Synthesized Nanocrystalline Co-Zn Ferrites

Co-Zn ferrite nano-powder was synthesized using the Microwave- Hydrothermal (M-H) method. The powder was characterized using X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), and Fourier Transform Infrared spectroscopy (FT-IR). The densification of nanoferrites was done using two methods: a) conventional and b) microwave sintering. Electrical and magnetic properties of the sintered samples were measured at room temperature. Electrical properties such as dielectric constant (?'), dissipation factor (D), initial permeability (μ_i) and quality factor (Q) were measured over a wide frequency range (10 kHz to 1 MHz). The Curie temperature has been determined from the permeability versus temperature plots. It was found that the enhanced electrical and magnetic properties were observed for microwave sintered samples.     

SnS2/TiO2 nanocomposites with enhanced visible light-driven photoreduction of aqueous Cr(VI)

SnS₂/TiO₂ nanocomposites have been synthesized via microwave assisted hydrothermal treatment of tetrabutyl titanate in the presence of SnS₂ nanoplates in the solvent of ethanol at 160 °C for 1 h. The physical and chemical properties of SnS₂/TiO₂ were studied by XRD, FESEM, EDS, TEM, XPS and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activity of SnS₂/TiO₂ nanocomposites were evaluated by photoreduction of aqueous Cr(VI) under visible light (λ>420 nm) irradiation. The experimental results showed that the SnS₂/TiO₂ nanocomposites exhibited excellent reduction efficiency of Cr(VI) (~87%) than that of pure TiO₂ and SnS₂. The SnS₂/TiO₂ nanocomposites were expected to be a promising candidate as effective photocatalysts in the treatment of Cr(VI) wastewater.     

Poly dimethylsiloxane/carbon nanofiber nanocomposites: fabrication and characterization of electrical and thermal properties

This article presents the fabrication and characterization of poly dimethylsiloxane/carbon nanofiber (CNF)-based nanocomposites. Although silica and carbon nanoparticles have been traditionally used to reinforce mechanical properties in PDMS matrix nanocomposites, this article focuses on understanding their impacts on electrical and thermal properties. By adjusting both the silica and CNF concentrations, 12 different nanocomposite formulations were studied, and the thermal and electrical properties of these materials were experimentally characterized. The developed nanocomposites were prepared using a solvent-assisted method providing uniform dispersion of the CNFs in the polymer matrix. Scanning electron microscopy was employed to determine the dispersion of the CNFs at different length scales. The thermal properties, such as thermal stability and thermal diffusivity, of the developed nanocomposites were studied using thermogravimetirc and laser flash techniques. Furthermore, the electrical volume conductivity of each type of nanocomposite was tested using the four-probe method to eliminate the effects of contact electrical resistance during measurement. Experimental results showed that both CNFs and silica were able to impact on the overall properties of the synthesized PDMS/CNF nanocomposites. The developed nanocomposites have the potential to be applied to the development of new load sensors in the future.