干燥、粉碎一体化装置

本文对干燥、粉碎一体化装置的典型设备惰性粒子流化床干燥器进行剖析,介绍应用情况,并作了经济性评价。     

空间晶体生长流体效应的实验研究和理论分析

在空间晶体生长实时观察装置上，利用溶液中形成的铌酸钾微晶作示踪粒子，首次在空间高温氧化物熔液内，实时观察和记录了空间表面和力对流效应。利用测量的结果计算了熔体内空间表面张力对流的速度场，并与地面表面张力对流的速度场进行了对比，理论计算与实验结果基本吻合。探讨了空间均匀分布铌酸钾微晶的形成机理。结果表明：表面张务对流在空间晶体生长过程中起主要作用，是形成均匀分布胞状晶体的主要机理。     

Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method

Composite particles composed of solid powders and polymer were prepared by semichemical recycle of wasted plastics. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. Both magnetite and silicon carbide powders were used as solid powders to give thermal and electric conductivity and magnetization, respectively. In the experiment, the oil‐phase dissolving expanded polystyrene was dispersed in fine droplets into the continuous water phase. Two kinds of powders were added at the same time or separately in the O/W dispersion. Composite particles were found to have the structure that polymer particle was covered with two kinds of solid powders. The mean diameter of composite particles and the content of each solid powder were strongly affected by the addition time when silicon carbide powder was added into the dispersion. Furthermore, it was found that the gradient adhesion layer due to two solid powders was able to be formed on the surface of polymer particle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 483–488, 2003     

Catalytic Combustion of Model Carbon Particles (CPs) over Pt/β-SiC Catalyst

Platinum catalyst supported on a medium surface area -SiC was successfully used for the catalytic combustion of model carbon particles and compared to a catalyst supported on a low surface area -SiC. The -SiC-based catalyst showed no deactivation as a function of cycling tests while a strong deactivation was observed on the -SiC-based catalyst. This deactivation was attributed to the progressive encapsulation of the platinum particles by a layer of silica which built up during the combustion cycle. These results render possible the use of Pt/-SiC catalyst as a diesel carbon particle catalytic filter with continuous regeneration.     

An Application of Silica‐Based Monolithic Membrane Emulsification Technique for Easy and Efficient Preparation of Uniformly Sized Polymer Particles

Summary: Uniformly sized polymer particles were prepared by an emulsification and polymerization technique utilizing a silica monolithic membrane, namely the “silica monolithic membrane emulsification technique”. In this paper, we utilized silica monolithic membrane as a device for the preparation of uniformly sized polymer particles. A mixture of monomers, diluents and oil‐soluble initiator was emulsified into a continuous medium through the silica monolithic membrane and polymerized. The particles obtained had a higher size uniformity than that of particles prepared by previously reported membrane emulsification techniques, such as the Shirasu Porous Glass (SPG) emulsification technique. Through the silica monolithic membrane emulsification technique, we could prepare particles having availability as a possible packing material for solid‐phase extraction (SPE) and high performance liquid chromatography (HPLC).

SEM photograph of silica particles prepared through capillary plate membrane.     

Diffusion of ellipsoidal granular particles in shear flow

The diffusion of nonspherical particles has not been well understood due to the complexity of their contact mechanics and self-organization of their orientations. We perform discrete element method simulations of monodisperse ellipsoids in a shear flow with Lees-Edwards boundary conditions to quantify the relation between the diffusion coefficient and the flow parameters. The results indicate that the particle aspect ratio strongly affects the diffusion coefficient by influencing the particle orientation and alignment. We develop a scaling law for the diffusion coefficient perpendicular to the flow direction, D_yy, which combines the influences of the shear rate , the solids fraction f, the effective particle diameter d_eff and the particle aspect ratio Z. We show that , where k_d is a dimensionless pre-factor, and a fit is obtained for the functional form of χ(f, Z). This scaling law will be useful in developing continuum transport models for applications.     

我国回转窑水泥不同粉磨工艺颗粒形貌剖析

利用电子显微镜及专用的计算机软件等方法，对我国目前大中型水泥企业不同粉磨工艺下水泥颗粒形貌状况进行了研究分析。研究结果表明，我国不同粉磨工艺下水泥颗粒形貌存在较大差别，提高磨机研磨功能有利于改善水泥颗粒形貌。     

Semi-continuous emulsion copolymerization of butyl methacrylate with polymerizable anionic surfactants

Two polymerizable anionic surfactants sodium 4-(ω-acryloyloxyalkyl)oxy benzene sulfonate (SABS-n, n=8 or 10) have been successfully used in the semi-continuous emulsion copolymerization with butyl methacrylate (BMA). After generating seeding particles in an emulsion consisting SABS-8 or SABS-10 and small amount of BMA using a redox initiator ammonium persulfate (APS)/tetramethylethylenediamine (TMEDA) at room temperature, most of BMA was added drop-wise to the polymerizing emulsion system during a period of 4-8 h. These emulsion copolymerizations produced nanosized latexes with high polymer/surfactant weight ratios up to about 12/1 and nearly monodisperse particles ranging from 18 to 33 nm in diameter. X-ray photoelectron spectroscopy results showed that SABS-n was significantly enriched on the surface of latex particles. The effects of concentrations of SABS-n, BMA, and APS/TMEDA and the latex characteristics during the continuous addition of monomer were studied. A possible polymerization mechanism was proposed.     

一种靶向蛋白质超声微泡的制备及表征

以氟碳气体为超声造影剂,通过接枝纳米磁性颗粒-RGD多肽,构建靶向蛋白质超声微泡,制备一种可同时用于超声造影和磁共振成像(MRI)的双模态造影增强剂。通过显微镜对磁性蛋白超声微泡形貌进行观察,利用红外光谱、分光光度法分析纳米磁性颗粒接枝牛血清蛋白的接枝率,并通过细胞实验评价磁性蛋白微泡的生物相容性。     

雾霾成因及严寒地区乙醇汽油对雾霾影响

本文通过分析雾霾的组成成分及其形成机理,分别研究了乙醇汽油燃烧产物气溶胶粒子、颗粒物、附加产物(醛酮等)和水分对严寒地带区域性雾霾形成的影响.研究结果表明,乙醇汽油燃烧产物对雾霾的影响也是比较严重的,在严寒地区冬季不建议过量使用乙醇汽油.