室温脉冲螺旋Wiggler磁体和大电流脉冲电源的研究

本文研究了适用于自由电子激光的室温脉冲螺旋Ｗｉｇｇｌｅｒ磁体，对其设计构思、磁场特性和设计参数进行了分析和计算．作者在文中还研究并设计了螺旋Ｗｉｇｇｌｅｒ磁体的大电流宽脉冲供电电源；分析了脉冲电流的时间特性对产生自由电子激光的影响程度．     

大电流监测信号提取的光收发及信号处理

近年来,大电流的监测成了人们十分关心的问题,这是由于大电流有强磁、高压、电流大等一系列的直接监测所不能克服的问题。这就需要把高压大电流的强电信号,经过提取后变成能在实验室中直接观测的弱电信号。为此,如何从高压大电流的信号中提取出随实时信号变化而实时变化的小信号就变成了一个关键问题。详细介绍了监测信号提取的光收发电路原理和后续信号处理电路,分析了各部分的作用,给出了必要的分析结果。     

Uses of Ozone in a Three-Phase System for Water Treatment: Ozone Adsorption

A new technique of using ozone for water treatment is presented. This new technique consists of using a three-step-process composed firstly of ozone adsorption on an appropriate adsorbent, secondly water treatment, and thirdly regeneration of the adsorbent. Results regarding ozone adsorption (the first step) are presented in this paper. Different types of silica gel and a type of TiO₂ have been tested for ozone adsorption. It was found that the physical characteristics of the silica gel affect its capacity for ozone. Titanium dioxide has shown ozone decomposition instead of adsorption as it contains Lewis acid sites. An exponential decrease of the silica gel capacity with its moisture content has been found. Linear isotherms in the range of ozone concentrations less than 100?g/m³ NTP have been found. A particle diffusion model with linear equilibrium isotherm has been used to model the breakthrough curves in fixed bed columns.     

提高供电质量减少高校供电能耗的措施

分析了高校现有供电网络存在的效率低、能耗大和供电质量不稳定的问题。提出了在增加投资不多的条件下，通过改变供电的运行方式既提高供电质量又减少能耗的一些方法。     

电子电气设备的熔断器、断路器保护

熔断器、断路器是电子电气设备最常用的保护电器,熔断器可以实现过载、短路保护,断路器除具上述功能外,还能实行失压保护.根据线路特点和所保护的设备,采取相应的保护设施,确保用电安全.     

真空行业现状及未来国内市场

简单扼要的概述了真空行业的发展历史，以较详细的统计数据阐述了2002年行业经济运行情况，并通过对相关行业“十五”发展规划的研究，对今后5～10年真空设备的市场进行了分析预测。     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

一种可调节电流的电流型PWM直流转换器

介绍一种用于驱动发光二极管(LED)的可调节电流的电流型PWM直流转换器.该直流转换器由于接有一个外接电阻,可以通过调节外接电阻的大小来调节输出电流.输出电流调节范围在5～40mA之间.主要分析了电路的输出电流调节功能,和这种输出电流可变的电流型PWM直流转换器的电流和电压反馈环的反馈实现原理.并简要介绍了这种带电流调节功能的PWM直流转换器的工作原理,最后给出了电路在输出不同电流时使用HSPICE软件对反馈参考电压,PWM锁存器输出波形的仿真结果.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

The effect of tetramethylammonium cations (TMA⁺) on TiO₂ crystal morphology in hydrothermal conditions has been studied. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. The morphologies including besom-like particle, nanosheet and nanotube have been observed. The different ways TMA⁺ cations in the hydrothermal bases affect the crystal growth manner are suggested to be responsible for the different morphologies of the as-synthesized samples.