Interactions between hydrogen and the (112¯1) twin boundary in hexagonal close-packed titanium

In hexagonal close-packed titanium, the interactions between the $\left(11\overline{2}1\right)$ twin boundary (TB) and hydrogen solute atoms with several different concentrations are investigated by using first-principles calculations. The preferential occupation sites of hydrogen atoms in the $\left(11\overline{2}1\right)$ TB region are searched and vary with the amount of hydrogen. Both the shift of the TB and the diffusion of hydrogen atoms, as well as the mutual effect on the movement of each other, are studied. The energy barriers of the TB shift increase with the hydrogen concentration. Additionally, the simulated tensile tests are applied for several systems with co-existing $\left(11\overline{2}1\right)$ TB and hydrogen atoms, and different geometry transformation behaviors at different hydrogen concentrations are found under the increasing tensile strain.     

A review of digital twin in product design and development

In the era of digitalization, there are many emerging technologies, such as the Internet of Things (IoT), Digital Twin (DT), Cloud Computing and Artificial Intelligence (AI), which are quickly developped and used in product design and development. Among those technologies, DT is one promising technology which has been widely used in different industries, especially manufacturing, to monitor the performance, optimize the progresses, simulate the results and predict the potential errors. DT also plays various roles within the whole product lifecycle from design, manufacturing, delivery, use and end-of-life. With the growing demands of individualized products and implementation of Industry 4.0, DT can provide an effective solution for future product design, development and innovation. This paper aims to figure out the current states of DT research focusing on product design and development through summarizing typical industrial cases. Challenges and potential applications of DT in product design and development are also discussed to inspire future studies.     

非啮合双螺杆挤出机三维流场数值模拟

高粘度物料在双螺杆反应器中的流动情况非常复杂,很难用解析法求解.利用ANSYS软件包对双螺杆挤出机非啮合并列型螺纹元件进行了三维等温非牛顿流场分析,分析了速度场和压力场的分布情况,讨论了不同边界条件对整个流道的速度场、压力场及流量的影响.计算结果对实际生产具有一定的指导意义.     

基于互馈试验台的测温系统研究

对电力牵引交流传动互馈试验台的测温系统的研究,在测温系统中,使用DS1820采集温度数据,以DSP为中央处理器,通过CAN总线构成单总线多点测温系统,实现了对互馈试验台的温度测量。     

啮合同向双螺杆排气段熔体输送流场及充满系数的数值模拟

应用罚函数有限元和边界元法,对啮合同向双螺杆排气段内非牛顿等温粘性流场进行了数值模拟,并由此计算了螺槽内熔体充满系数与其它有关工艺参数和螺杆几何参数之间的关系,为进一步研究排气段的工作特性创造了条件     

Sub-solvus Cellular Recrystallization and P Phase Formation in a Single-Crystal Superalloy Containing Re

Sub-solvus recrystallization behavior of a second-generation single-crystal superalloy has been studied by transmission electron microcopy and scanning transmission electron microcopy. Surface local stress facilitated cellular recrystallization accompanied with formation of twin structure and TCP phase of P during annealing at sub-solvus temperature of 1,100 °C. The precipitation of P phase is considered to be attributed to the coarsening of c0 phase in the recrystallized aggregates which lower the activation energy for atomic migration.     

粗晶Mg-3Gd-1Zn合金高温压缩变形过程中的动态再结晶

研究了粗晶Mg-3Gd-1Zn合金在723 ～823 K,应变速率0.100 ～0.001s-1条件下单轴压缩变形过程中的动态再结晶行为.研究结果表明,其热压缩曲线为典型的动态再结晶型,峰值流变应力和稳态流变应力随温度的升高而减小,随应变速率的增大而增大;在该实验温度范围内其变形激活能约为140 kJ·mol-1;再结晶晶粒尺寸lnd与lnZ参数偏离线性关系,且变形温度对再结晶晶粒尺寸的影响比应变速率更大.利用金相和电子背散射技术(EBSD)对773 K,0.010 s-1条件下压缩不同变形量的Mg-3Gd-1Zn合金进行了组织表征,发现其动态再结晶大都发生在孪晶界及其与原始晶界的交叉处,主要为孪生诱发动态再结晶形核(TDRX)机制.再结晶形核初期形状不规则,晶界倾向于呈直角,随着应变量的增大,由于晶界的局部迁移,再结晶晶粒逐渐转变为稳定的等轴晶.     

Architecture as a Dissident Practice: An Interview with Diller Scofidio + Renfro

For three decades architect Liz Diller and artist Ricardo Scofidio have been collaborating on projects that test the boundaries between art and architecture. They have done more than any other practice to champion interdisciplinary research and to advocate architecture as a wider form of cultural production. Olympia Kazi went to talk to Liz Diller to ask her if she thinks theory could really be dead, or merely in a ‘lull’. Copyright © 2009 John Wiley & Sons, Ltd.     

Exit Ltd

For London-based editor, author and curator Shumon Basar , The Temple of Janus Revisited by Exit Ltd is an effective critique of post-9/11 politics and culture. A virtual re-enactment of the Roman Temple of Janus in Washington DC, it evokes the imminent collapse of the American Empire. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel twin reactor for separate evolution of hydrogen and oxygen in photocatalytic water splitting

Photocatalytic water splitting with separate H₂ and O₂ evolution is crucial because it eliminates the explosion potential and hydrogen-purification cost. A novel twin reactor was designed to separate the evolution of hydrogen and oxygen in photocatalytic water splitting under visible light. A modified Nafion membrane was employed to segregate the two photocatalysts in the twin reactor so that hydrogen and oxygen can be evolved separately. Conventional Z-scheme catalysts, Pt/SrTiO₃:Rh and WO₃, were used as hydrogen-photocatalyst and oxygen-photocatalyst, respectively. Fe²⁺ and Fe³⁺ were added in the reaction solution as electron-transfer mediator. The ratio of evolved H₂ and O₂ was in agreement with the stoichiometric ratio (2:1) of hydrogen and oxygen of water. An average hydrogen generation rate of 1.59 μmol/g-h was achieved in the twin-reactor system, which was twice as much as that in the conventional Z-scheme system. The improved H₂ yield was due to the prevention of the water-splitting backward reaction in the twin reactor.