分子生物技术在石油降解微生物研究中的应用

总结了生物法治理石油污染的局限性,介绍了几种在石油降解微生物研究中广泛应用的分子生物技术,并对该研究领域未来的发展趋势进行了预测。     

利用南水北调工程改善济宁水生态环境的措施

通过对济宁市防治水污染技术研究, 提出水污染防治在政策措施上实施治污抓源头, 杜绝不达标排放; 在城市 建设规划上, 把河湖生态湿地建设、 改善居住生活环境与城市建设有机结合; 在河湖治理上, 坚持工程、 生物措施并 举; 在工程管护上, 坚持依法治水。利用南水北调东线工程建设, 实施水污染防治建设, 通过对济宁市水污染防治成 果的阐释, 为今后水污染治理提供成功的经验和做法。     

Breakthrough and Sulfate Conversion Analysis during Removal of Sulfur Dioxide by Calcium Oxide Sorbents

Sorption of sulfur dioxide (SO₂) was carried out on calcium‐based sorbents under dynamic conditions in a fixed bed. The experimental conditions were reaction temperature (700 to 1000°C), SO₂ concentration (1000‐10 000 ppm), sorbent particles size (1 to 2 mm) and the types of sorbents (hydroxide or carbonate). The sorption process was found to be effective at low concentration levels (less than 10 000 ppm) as the breakthrough time significantly decreased with increase in concentration. The maximum removal of SO₂ was observed at a reaction temperature of 950°C. The hydroxide‐based sorbents of relatively smaller particle size were found to exhibit superior sorption performance in terms of longer breakthrough time and higher sulfate conversion. A mathematical model developed, assuming a porous structure of the sorbent materials, attributed the low sulfation conversion during SO₂ sorption due to a pore diffusion mechanism.     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

循环经济与浮法玻璃工艺的发展

在玻璃行业贯彻循环经济的理念,改进工艺思想和方法,节约资源,降低消耗,提高资源利用率,减少污染物排放,是我们对后人应负的责任和对地球应尽的义务。     

中国汞污染的现状及防治对策

综述了环境汞污染的主要来源及特点,分析了中国现阶段汞污染的现状,提出加强燃煤汞污染的控制、削减工业汞使用量、提高社会公众的参与意识是治理我国汞污染当采取的有效措施。     

连续冶炼冶金焦工艺初探──（Ⅰ）现状分析和连续混热式焦炉的结构

本文论述了炼焦工艺的现状和发展方向，分析了存在的问题，提出了一种全新的连续型混热式冶金焦炉结构及其工艺流程，为焦化工业的发展探讨了一条新的途径。     

β-环糊精-氧化石墨烯超分子杂化体的构筑及应用进展

β-环糊精是由7个D-吡喃葡萄糖单元通过α-1,4-糖苷键键连成环的超分子主体分子，“内疏水、外亲水”的独特结构赋予了其优异的分子识别能力；氧化石墨烯类材料凭借其优良特性成为近几年的研究热点。由β-环糊精和氧化石墨烯构筑的超分子杂化体在兼具二者特有性能的基础上又有新功能的引入。本文综述了β-环糊精-氧化石墨烯超分子杂化体的构筑方式，按二者间的连接方式，分别为共价键和非共价键两种连接方式，其中通过共价键连接是目前最主要的构筑方式；此外对β-环糊精-氧化石墨烯超分子杂化体的特征和表征进行了简述。同时对β-环糊精-氧化石墨烯超分子杂化体在水污染处理、电化学检测、药物控释和催化等领域的应用进展进行了综述。最后对该超分子杂化体在构筑和应用上的发展趋势进行了展望。     

钽铌湿法冶金技术概况及发展趋势探讨

介绍了钽铌湿法冶金技术的发展概况和现状。根据分解介质的不同,钽铌湿法治金技术可分为碱熔融法、酸法和氯化法,碱熔融法可分为钠碱熔融法和钾碱熔融法,酸法主要有氢氟酸法和硫酸法。分别介绍了以上各方法的工艺路线,并对其优缺点进行了分析。针对现行氢氟酸工艺存在严重氟污染和对低品位钽铌矿分解率低的问题,依据清洁冶金原理,提出了钽铌亚熔盐清洁冶金新工艺,从生产源头消除了氟污染,可实现钽铌资源的高效清洁利用,具有良好的应用前景。     

Transfer efficiency for airless painting systems

Spray transfer efficiency (TE) is defined as the mass fraction of sprayed paint which is deposited on the intended target, the remainder of the sprayed paint becomes undesirable overspray. The relationship between TE and gun supply pressure (or paint mass flow rate), gun-to-target distance, gun traverse speed, the angle of the spray gun relative to the target (gun-to-target angle), plus spray cone angle is reported herein for a typical fan spray system. Experimental results indicate that spray momentum rate (SMR) and droplet size dictate the TE for the various combinations of parameters considered here. The key finding is that TE correlates with SMR and spray mean drop size (Sauter mean diameter, or D₃₂) via an expression of the form TE=a+b SMR − c (SMR)²+d D₃₂, where a, b, c, and d are coefficients, determined by fitting the experimental data, and SMR is estimated via SMR=m²/ρA, where the paint mass flow rate m, the paint density is ρ, and the gun exit orifice effective tip cross sectional area is A. This expression accounts for physical phenomena that govern sprayed droplet deposition characteristics, such as entrainment, bounce-back, and drop size. Experimental results also show that, for the range of parameters studied, gun traverse speed has no effect on TE, but increasing the angle of the spray gun relative to the target (gun-to-target angle), increasing the spray cone angle, or increasing the gun-to-target distance will decrease TE.