Oxidation of methane in a wide range of pressures and effect of inert gases

The analysis of methane oxidation in a wide range of pressures (0.05–10 atm) demonstrates that the efficiency of CH₃ radicals recombination is of great importance for high selectivity of C₂ hydrocarbons formation. The relative efficiency of different “colliders” assisting the stabilization of exited C₂H*₆ molecules increases in the series: solid surface> Ar> He. The increase of the overall reaction rate upon increasing pressure of the inert gases in the case of catalysts having a higher surface area and more developed pore structure is likely due to the contribution of the surface-induced chain reaction in the volume of pores.     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

真空微电子三极管几何参数的设计考虑

真空微电子三极管是近年来兴起与发展的真空微电子学中的一类重要器件。本文从真空微三极管的工作特性出发,分析了这类器件中所需考虑的几何参数和工作特性的关系,并给出了一些理论和实验公式,为今后的设计提供一些参考。     

中型孔径小梯段露天石方深孔水压爆破

介绍了一种石方开挖新技术－－露天石方深孔水压爆破技术。用试验的方法，通过和常规石方爆破进行类比，从而研究了此项新技术在中型孔径小梯段应用条件下的各种爆破参数，并进行了定性和定量分析，得到了一些初步的结论。     

Enzymatic Firming of Processed Red Pepper by Means of Exogenous Pectinesterase

The objective of this investigation was to demonstrate that the firmness of a commercial vegetable product, diced and frozen red pepper (Capsicum annum var. Sendt), could be improved by the use of exogenous pectinesterase in an industrially relevant process. The diced pepper pieces 10 × 10 × 7 mm³ were infused under vacuum with a commercially available pectinesterase. The range of optimal process conditions was: 15-20°C, 45 min infusion time, a 10-25 mM CaCl₂ infusion brine, a w/w ratio of pepper fruit to infusion brine of 1.5:1, and an enzyme dosage of 30-60 pectinesterase units (PEU) per kg pepper fruit. The firmness as measured by back extrusion was improved by a factor of two to three. The effect of firming was robust and conserved after freezing and heating in a simulated household cooking process. The firming process seems easily adaptable to industrial conditions and may be applicable to other vegetable and fruit products.     

Rapid Prototyping and Tooling of Custom-Made Tracheobronchial Stents

Rapid prototyping (RP) and rapid tooling (RT) techniques can be applied to the field of medicine primarily because of their ability to produce customised profiles and geometries in relatively short lead times. In this paper, the process by which these techniques can be applied for the production of customised tracheobronchial stents for the purpose of maintaining patency in an occluded respiratory tract is described. A comparison of RP systems was carried out to establish the preferred RP method to produce the master model. The vacuum casting RT process was then used to produce the stent.     

沙南油田高效开采技术政策研究

在该油藏大量动静态研究成果的基础上 ,根据国内外相似油田开发实例 ,运用数理统计、渗流力学、油藏工程及数值模拟的方法 ,结合矿场实际资料 ,对油藏进行天然能量、井网密度、注水系统、采油系统、最终采收率等参数的研究 ,获得了油田高效开发的技术界限。     

TORO400E电动铲运机卷缆系统研究

介绍了TORO400E电动铲运机卷缆系统的工作原理及常见故障表现,按照国家标准,对卷缆系统的压力进行调整,计算出阻尼油缸压力调整值。在实际使用中运用,取得了良好的效果。     

内热式液态合金离子源

本文介绍了一种实用的液态合金离子源结构，我们利用本结构研制成功了Ａｕ－Ｓｉ和Ａｕ－Ｓｉ－Ｂｅ液态合金离子源，测出了它们的发射特性。