明渠水流泥沙运动水深平均及力矩方程的理论和验证

首次提出了水流泥沙运动水深平均及其力矩方程的概念 ,并从理论上推导出这套方程组。提出水流泥沙运动力矩方程的目的有两个 ,一是在不增加空间维数的情况下可以有效地恢复水流泥沙因子沿水深分布信息 ,克服目前普遍使用的水深平均方程过多地忽略沿水深分布信息的缺点 ;二是增强模型的模拟能力。针对这两个目的是否能真正得到体现 ,分别从理论和实验室资料两个方面对新推导的力矩方程进行了全面的检验。理论验证结果表明 ,一维的力矩方程除了能模拟水深平均的流速和含沙量 ,还能够较好地模拟水流泥沙因子沿水深分布信息 ,这充分说明了一维力矩方程的二维特性。为了检验力矩方程的模拟能力 ,特别选取了一些极端的水流泥沙运动实验 ,如清水冲刷、点源加沙和深槽回淤等。模拟结果表明 ,力矩方程对于这些极端的水沙运动具有较好的模拟能力     

战术弹道导弹落点预报的一种方法

根据椭圆弹道理论，提出了一种可以用于反战术弹道导弹作战的预测弹道及预报落点的方法，给出了算例，并分析了产生误差的原因和对预测结果的影响程度。     

糯扎渡水电站机组主保护方案

结合糯扎渡水电站大型机组的发电机结构、发电机中性点引出方式及主接线对发电机主保护方案进行了分析研究，提出了发变组主保护方案，并初步确定了发电机中性点CT配置方案。同时也对主要的后备保护及异常运行保护进行了分析，并提出了设置方案。     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

多测井曲线的综合处理合成

测井曲线是地质分层的基础，但在利用单一测井曲线解决复杂地质问题时也存在多解性和局限性。为克服多解性，人们采用多种测井曲线进行地质分层，提高了分层的精度。本文在此基础上提出把多条曲线分别赋予不同的加权因子，然后进行归一化处理，形成一条标准综合参数测井曲线。此综合参数曲线突出了所选的多条测井曲线的公共信息，减少或削弱了单一测井曲线中的偶然误差，提高了综合后测井资料的可信度。该方法可应用于地质分层、岩性分析、含油气预测等诸多领域。应用时要注意，并非所选择的测井曲线种类越多越好，而是要选择那些最能反映地层单元特征信息的测井曲线。     

A new stereological principle for test lines in three-dimensional space

A new principle is presented to generate isotropic uniform random (IUR) test lines hitting a geometric structure in three-dimensional space (3D). The principle therefore concerns the estimation of surface area, volume, membrane thickness, etc., of arbitrary structures with piecewise smooth boundary. The principle states that a point-sampled test line on an isotropic plane through a fixed point in 3D is effectively an invariant test line in 3D. Particular attention is devoted to the stereology of particles, where an alternative to the surfactor method is obtained to estimate surface area. An interesting case arises when the particle is convex. The methods are illustrated with synthetic examples.     

Non-pinched, minimum energy distillation designs

Non-pinched, minimum energy solutions are important class of distillation designs that offer the potential advantage of a better trade-off between capital investment and operating costs. In this paper, two important tasks associated with non-pinched distillation designs are studied. Thus the novel contributions of this work to the literature are

(1) A comprehensive methodology for finding non-pinched minimum energy designs.

(2) Understanding of the reasons for the existence of non-pinched distillation designs.

It is shown that the recent shortest stripping line distance approach of Lucia et al. [Lucia, A., Amale, A. and Taylor, R., 2007, Distillation pinch points and more. Comput Chem Eng, available on-line] is capable of systematically and reliably finding non-pinched, minimum energy distillation designs. In addition, we provide an understanding of the reasons behind the existence of non-pinched designs, which include trajectories that follow unstable branches of a pinch point curve in azeotropic systems, the inherent looping structure of trajectories in hydrocarbon separations, and the presence of ancillary constraints in multi-unit processes like extraction/distillation. Several distillation examples are studied and many numerical results and geometric illustrations are presented that show the shortest stripping line distance methodology is indeed a powerful and systematic tool for computing non-pinched, minimum energy designs and that support the underlying reason we provide for the existence of non-pinched designs.     

烧结处理小矿山精矿的应用研究

研究小矿山精矿的性质，分析小矿山精矿对烧结过程的影响，提出了增加小矿山精矿配入量的途径及方法．     

关于沥青针入度指数

介绍了沥青针入度指数(PI)的由来和计算、使用意义、局限性和分析。     

面向WLAN的MPC852T嵌入式系统设计

MPC852T是Motorola新近推出的MPC866/MPC859T家族中面向低端的一款通信处理器.嵌入式Linux由于其费用低廉及开放源码而具有广阔的发展前景.文中在分析了MPC852T通信处理器和嵌入式Linux操作系统的基础上,将二者结合给出了一种嵌入式硬件系统的设计与实现,以及该硬件系统在无线局域网WLAN中的一种应用.实践证明,该硬件系统具有性能稳定、廉价、可扩展性强、适用面广等优点.