5-芳亚甲基-N-(4-羧基苯基)罗丹宁衍生物的微波辅助合成及分子模拟研究

以对氨基苯甲酸为原料,采用简易方法合成N-(4-羧基苯基)罗丹宁,并在醋酸和醋酸钠体系中与芳香醛化合物经回流反应或微波辐射合成(Knoevenagel缩合)得到系列标题化合物,并用Sybyl-X 2.0程序研究了标题化合物与烯酰基载体蛋白(ACP)还原酶的分子对接情况。     

Solar irradiation and PV module temperature dispersion at a large‐scale PV plant

When evaluating the performance of a photovoltaic (PV) system, it is extremely important to correctly measure the plant operating conditions: incident irradiation and cell temperature. At large‐size PV plants, the possible dispersion of the plant operating conditions may affect the representativeness of the values measured at one single point. The available literature contains many observations on irradiance dispersion (typically associated to high temporal resolution experiments) and its effects on the PV power output (unexpected power transients, power fluctuations, etc.). However no studies have been made on the long‐term energy‐related effects of geographic dispersion of solar irradiation, which could affect, for example, to the uncertainty in determining energy performance indexes like PR. This paper analyses the geographical dispersion in the PV operating conditions observed at low temporal resolutions (day, month and year) at two PV plants located, respectively, in the south of Portugal and the north of Spain. It shows that daily irradiation deviations are significantly higher than is commonly supposed. Furthermore, once the measurement points are a certain distance apart (a few hundred metres), the deviations in irradiation appear to be independent of distance. This could help to determine how many irradiance sensors to install in order to reduce uncertainty. Daily mean temperature differences between different points at a large‐scale PV plant range from 1 to 7 K and are not related to the distance between measurement points. Copyright © 2014 John Wiley & Sons, Ltd.     

Toward multiple maximum power point estimation of photovoltaic systems based on semiconductor theory

Environmental conditions, such as temperature, non‐uniform irradiation, and solar shading, deeply affect the characteristics of photovoltaic (PV) modules in PV‐assisted generation systems. Several local maximum power points (MPPs) are found in the power–voltage curve of PV systems constructed by series/parallel‐connected PV modules under partially shaded conditions. The characteristics of PV systems change unpredictably when multiple MPPs occur, so the actual MPP tracking (MPPT) becomes a difficult task. Conventional MPPT methods for the PV systems under partially shaded conditions cannot quickly find the actual MPP such that the optimal utilization of PV systems cannot be achieved. Based on the p–n junction semiconductor theory, we develop a multipoint direct‐estimation (MPDE) method to directly estimate the multiple MPPs of the PV systems under partially shaded conditions and to cope with the mentioned difficulties. Using the proposed MPDE method, the multiple MPPs of the PV systems under partially shaded conditions can be directly determined from their irradiated current–voltage and power–voltage characteristic curves. The performances of the proposed MPDE method are evaluated by examining the characteristics of multiple MPPs of PV systems with respect to different shading strengths and numbers of the shaded PV modules and also tested using the field data. The experimental results demonstrate that the proposed MPDE method can simply and accurately estimate the multiple MPPs of the PV systems under partially shaded conditions. The optimization of MPP control models and the MPPT for PV systems could be achieved promisingly by applying the proposed method. Copyright © 2014 John Wiley & Sons, Ltd.     

CNTs/HAp复合材料及其动物离体组织热效应研究

设计制备了CNTs/HAp纳米吸波生物材料,开展了在2450MHz微波频率辐照下CNTs/HAp复合材料动物离体组织热效应的研究工作,研究发现该复合材料在微波作用下具有明显的热效应.在动物离体组织温升不显著情况下,测得材料温度高达42～45℃,热效应特别显著,具有明显的微波控制下的靶向热疗功能.研究了不同的工艺条件对材料热效应的影响,并对微波辐照下CNTs/HAp复合材料产生热能的机理进行了初步分析.     

Influence of Simulated Outside-Reactor Irradiation on Anticorrosion Property of Austenitic Stainless Steel

The influence of γ-ray irradiation on the properties of inside-reactor stainless steel structures was studied by simulating the working condition of pressurized water reactor （PWR） first circuit and the outside-reactor y-ray irradiation. The result shows that the simulated outside-reactor irradiation （irradiation dose 4. 4 ）〈 104 Gy） has no influence on anticorrosion properties of solutionized SUS304 austenitic stainless steel, including intergranular corrosion （IC） and stress corrosion cracking （SCC）. Anticorrosion properties （IC, SCC） of sensitized SUS304 austenitic stainless steel are reduced by simulated outside-reactor irradiation. The longer the sensitized time is, the more obvious the influence is.     

γ辐照加工用新型工作模体设计研究

本文研究设计了一种用于获取γ辐照装置辐射场和货物剂量场真实分布的新型工作模体。基于真实γ辐照装置参数构建了有效可用的模拟辐射场,提出了新型工作模体的结构和填料设计方法。采用蒙特卡罗方法和随机填充方法（RCS）模拟计算剂量计套管材料与壁厚、填料小球尺寸、空心填料小球尺寸与壁厚、小球填充方式等影响模体剂量学性能的主要因素的分布规律。在满足计算置信度的前提下,参数优化取值范围为：套管采用壁厚为3~5 mm的铝管,对辐射场干扰不超过4.372 23%;填料选择外径为1~4 cm、壁厚为1.1~11.5 mm、材料等效性好、货物密度模拟范围为0.1~0.5 g/cm³的聚丙烯小球,对辐射场干扰不超过9.998 44%;均匀填充和随机填充模式对辐射场干扰基本持平,且均不超过10%。结果表明,当前设计可行有效,投入低、兼顾参数多且量程更宽,适合推广应用。     

低剂量率γ射线杀伤肿瘤细胞机制的实验研究

用60Co源以1Gy/min剂量率照射Hela细胞,剂量分别为1、2、5、10、15Gy.用AnnexinV和PI双染法观察凋亡细胞形态;DNA梯形条带证实凋亡存在;克隆形成分析细胞增殖能力.结果显示:(1)Hela细胞凋亡率随照射剂量和时间的增加呈上升趋势,照射后168h组各剂量点凋亡率高于其他各时间组.2Gy以下时凋亡率改变不大,达5Gy时凋亡率显著增加,且达峰值(72.57±2.04)%(P＜0.001).(2)早期凋亡细胞,PS外翻,胞膜呈绿色荧光圈.凋亡晚期出现Annexin V-FITC及PI染色均阳性的外绿内红的细胞图像.坏死细胞则为红色.(3)凋亡细胞碎片呈"梯状"条带.(4)1Gy/min的剂量率照射,剂量为2-15Gy,克隆形成率由(58.95±0.36)%降至(1.67±0.35)%(P＜0.001).表明低剂量率γ射线照射可诱导Hela细胞凋亡,其凋亡率与照射剂量相关,在5Gy时凋亡率最高.     

中国抗中子辐照钢的抗辐照设计与验证

聚变堆等未来先进核能系统要求材料在强流高能中子辐照下长期保持良好的结构稳定性和机械性能。为适应未来先进核能技术发展的需要,中国科学院核能安全技术研究所•凤麟团队牵头研发了具有我国自主知识产权的中国抗中子辐照钢--CLAM钢。CLAM钢的设计考虑了未来核能清洁性的要求,以及苛刻服役环境中材料抗辐照、耐高温、耐腐蚀等性能要求。通过中子学计算分析设计了低活化成分范围,基于选择性纳米相析出进行了抗辐照、耐高温性能优化设计。针对材料的抗辐照性能,利用国内外中子、离子、电子及等离子体辐照设施开展了系列辐照考验研究,通过多角度表征辐照前后材料的微观结构和宏观性能,综合评估了材料的辐照性能,并与国际上同类材料在相近或相同条件下的辐照性能进行了对比分析,结果表明CLAM钢具有良好的抗辐照性能。     

双极晶体管的高温变剂量率辐照效应

研究了双极晶体管的变剂量率电离辐射损伤,发现从高到低的变剂量率辐照更有利于低剂量率辐射损伤增强效应的加速评估.